0.96" 128x64 Blue-Yellow I2C 4-Pin OLED display 0.96" 128x64 Blue-Yellow I2C 4-Pin OLED display features: - Interface: I2C (logical level 3.3V) - Resolution: 128x64 - Angle of view:> 160 degrees - Screen color: blue and yellow (1/4 above yellow and 3/4 below blue) - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 ° C - 70 ° C - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " - Application: smart watch, MP3, thermometer, instruments, DIY projects, etc ... - It is an OLED screen module with blue-yellow display and with a resolution dot matrix 128x64 and an IC2 interface. - The display includes the driver controller SSD1306 128 x 64 Segment Driver / OLED / PLED Common. Code P0134 Available Regular price €7.50 -€1.00 Price €6.50
10-pieces network cable tool set - Crimper, tester,... Network tool set (10 pieces) for the construction of telephone and network cabling (RJ45, RJ11, RJ12) in a practical closed case. Crimper, tester, cable detector, cable stripper, screwdrivers, Rj-45 connectors, etc. Code H0319 Available Regular price €25.90 -€3.95 Price €21.95
12 Bars of 7mm Hot Silicone Glue Gun 12 Bars of 7mm Hot Silicone Glue Gun features:- Hot melt adhesive- Blister packaging- Includes 12 silicone bars 7.2mm x 100mm Code H0102 Available Regular price €2.39 -€0.90 Price €1.49
120x Female-Male Cables Female-Female Male-Male Dupont Jumpers 2.54 for Arduino 120x Female-Male Cables Female-Female Male-Male 2.54 Jumpers Dupont Arduino features:- Length: 20cm- Quantity: 120 cables- Female-Female 40 units- Male-Male 40 units- Female-Male 40 units Code K0103 Available Regular price €7.47 -€1.48 Price €5.99
120x Female-Male Cables Female-Female Male-Male Dupont Jumpers 2.54 for Arduino 120x Female-Male Cables Female-Female Male-Male 2.54 Jumpers Dupont Arduino features:- Length: 20cm- Quantity: 120 cables- Female-Female 40 units- Male-Male 40 units- Female-Male 40 units Code K0114 Available Regular price €5.97 -€0.98 Price €4.99
12V On/Off LED Pushbutton Red 16mm N/A NO Latching push-button 12V normally open- For panel N / A NO 2A 36V Stainless Steel on / off- Type of operation: On / Off- Contact switch: 1 NA (normally open)- Max Switch Classification: 2A / 12VDC- Body material: Stainless steel- Button Material: Stainless steel- Protection Classification: IP67 / IK08- Operating temperature: -20C + 55C- Color: Red Code K0194 Available Regular price €5.89 -25% Price €4.42
16mm CGL camera lens, CSI-2 interface, resolution 10 megapixels 16mm fixed lens compatible with Raspberry Pi official HQ Camera (Reference RA094) C-mount, long distance telephoto type (up to 40m) 10 Mpx. Code RA132 Last items in stock Regular price €61.49 -€11.50 Price €49.99
16x2 1602 LCD display HD44780 Backlit Blue background It consists of a 16-character, 2-row display. The display is compatible with the HD44780 controller. Ideal for projects with ARDUINO. You can use it with PIC, AVR, STM32. 16x2 1602 LCD display HD44780 Backlit Blue background features: - LCD screen , 16 characters and 2 lines - 5V power supply - HD44780 compatible controller - Backlit blue background, white letters - Include an adjustable contrast pin - Dimensions (mm): 80 x 36 x 12 Code P0014 Available Regular price €2.65 -€0.75 Price €1.90
16x2 LCD screen 1602 HD44780 Green background It consists of a 16-character, 2-row display. The display is compatible with the HD44780 controller. Ideal for projects with ARDUINO. You can use it with PIC, AVR, STM32. Characteristic: - LCD screen, 16 characters and 2 lines - 5V power supply - HD44780 compatible controller - Backlit blue background, black letters - Include an adjustable contrast pin - Dimensions (mm): 80 x 36 x 12 Code PV014 Available Regular price €3.29 -€0.50 Price €2.79
2 Channel Relay Module 5V 10A for Arduino 2 Channel Relay Module 5V 10A for Arduino features:- 5V relay module with 2 optocoupled channels- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- LED indicator: For each channel- Dimensions: 40x 50mm Code RL006 Available Regular price €1.99 -€0.35 Price €1.64
2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino 2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino features:- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 12V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator: For each channel- Dimensions: 40x 50mm- Has a jumper that allows to choose type of trigger signal (low / high)- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Code RL004 Available Regular price €3.15 -€0.50 Price €2.65
2-DOF Pan-Tilt HAT for Raspberry Pi - tilt camera holder HAT kit with 2 DOF turn & tilt stand designed for Raspberry Pi. Includes the integrated PWM chip PCA9685 that allows RPi to control camera movement, and the TSL25911FN ambient light sensor that detects light intensity through the I2C interface. Code RA098 Available Regular price €25.99 -€3.00 Price €22.99
2.4 inch TFT LCD screen 240x320 SPI LCD TFT Display Module 240x320 2.4 SPI features: - LCD screen TFT 240x320 pixels- 262,000 possible colors (18 bit)- Pixel: RGB vertical band- Driver ILI9341- SPI interface- 8-bit digital interface, 4-bit control lines- Resistive touch screen 4 - cables- Ideal for projects with ARDUINO, Uno R3, MEGA2560 Helpful Links: Wiring of the TFT LCD screen 2.4 SPI - Connect the TFT 2.4 SPI LCD screen with the UNO module Display graphics and texts on the LCD TFT screen 2.4 SPI Program a touch calculator on the LCD screen TFT 2.4 SPI Code P0001 Available Regular price €11.95 -€2.40 Price €9.55
20mm copper tape - Conductor 10mm copper tape - Conductor features: - Material: copper foil - Size: 20 mm — 30 m - Copper foil thickness: 0.05 mm - Conductive - Adhesive - Approx Length: 30m Applications: - EMI and RF shielding, - paper circuits, soldering, - electrical repairs, - slug repellent. Code H0183 Available Regular price €13.95 -€1.50 Price €12.45
20x4 2004 LCD display PCF8574T I2C Backlit Blue - It consists of a 20-character, 4-row display - The display is compatible with the controller HD44780 and integrates the module so you can use it through the I2C protocol without any problem - Only two pins are needed for communication, SDA and SCL - Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32 PCF8574 - & gt; the default address 0x20 PCF8574A - & gt; the default address 0x3F - It can be changed to any between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2 20x4 2004 LCD display PCF8574T I2C Backlit Blue features: - LCD screen, 20 characters and 4 lines - 5V power supply - HD44780 compatible controller Code P0013 Available Regular price €8.49 -€1.50 Price €6.99
2WD Round Car Chassis 2x Ultrasonic Sensor Contents: - 2x Round transparent chassis plate diameter of 14cm - 2x DC 5V gear motor - 2x 6.5cm wheels (Dia .) x 2.6cm (H) - 2x Encoder discs - 2x Idlers - 2x HC-SR04 ultrasonic sensor, distance meter - 2x Holder for HC-SR04 - 1x Battery holder 2xAA (batteries not included) - Screws for assembly Motor characteristic: - Voltage: 3 at 6Vdc - Reducer: 1:48 - No load speed: 100 RPM at 6Vdc - No load current: 90mA at 3Vdc - 180mA at 6Vdc Code R0005 Available Regular price €19.95 -€3.00 Price €16.95
2WD Smart Robot Car Distance UNO Kit DIY - The ideal kit to build a robot car- Includes battery compartment for 6 AA batteries and ignition switch. (batteries not included) 2WD Smart Robot Car Distance UNO Kit DIY features: - Robot platform with 2 wheels and idler- UNO CH340 board compatible with Arduino- Prototype plate 170 points- Micro servo 9g- Platform for servo- Distance sensor HC-SR04- Sensor shield for sensors- L298N motor controller Motor 2WD Smart Robot Car Distance UNO Kit DIY features: - Voltage: 3 to 6Vdc- Speed without load: 100 RPM to 6Vdc- No-load current: 90mA to 3Vdc - 180mA to 6Vdc Code R0047 Available Regular price €30.32 -€1.84 Price €28.48
2WD Smart Robot Car Kit DIY - The ideal kit to build a robot car- Includes battery compartment for 4 AA batteries and ignition switch. (batteries not included) 2WD Smart Robot Car Kit DIY features: - Robot platform with 2 wheels and idler- UNO CH340 board compatible with Arduino- Prototype plate 170 points- Micro servo 9g- Platform for servo- Distance sensor HC-SR04- Sensor shield for sensors- L298N motor controller Motor 2WD Smart Robot Car Kit DIY features: - Voltage: 3 to 6Vdc- Speed without load: 100 RPM to 6Vdc- No-load current: 90mA to 3Vdc - 180mA to 6Vdc- Dimensions of the wheel: diameter 65mm - width 26 mm Helpful Links: Realization of a robot manageable by Infrared Code R0042 Available Regular price €37.84 -€1.55 Price €36.29
3.5 inch LCD TFT Acrylic Case for Raspberry Pi Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi. It is perfectly mechanized to give access to all the ports of the Raspberry. Intended for use with a 3.5-inch screen, reference in our store: RA020 3.5 inch LCD TFT Acrylic Case Code RA018 Available Regular price €4.40 -25% Price €3.30
300 Pieces LED Diodes 3mm 5mm red green yellow blue white Set of 300 diodes packed in a handy box. Lens colour: red, green, yellow, yellow, blue - diffuse, light white. Code P0104 Available Regular price €7.95 -€1.46 Price €6.49