Acrylic robot 4 DOF Arm without servo
  • Acrylic robot 4 DOF Arm without servo
  • Acrylic robot 4 DOF Arm without servo
  • Acrylic robot 4 DOF Arm without servo

Acrylic robot 4 DOF Arm without servo

R0077

Robot arm set 4 DOF acrylic with screws and screwdriver for robotics projects.
100% compatible with Arduino.
Acrylic robot 4 DOF Arm without servo features:
- Type: DIY kit robot arm 4 DOF
- Degree: 4 degrees of freedom
- Material: acrylic
- For: 8 years and above
- Weight: ~ 450 g
- Does not include servos but it is imperative to have 4 micro servos sg90 to be able to mount it
More informations:
1. 4 arm axes with more untrammeled and flexible experience.
2. Most of the pieces are integrated in a perforated way at a time, which is very strong and easy to install.
3. All movement joints are using high quality bearings with good precision.

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Acrylic robot 4 DOF Arm without servo description


Robot arm set 4 DOF acrylic with screws and screwdriver for robotics projects.
100% compatible with Arduino.

Acrylic robot 4 DOF Arm without servo features:


- Type: DIY kit robot arm 4 DOF
- Degree: 4 degrees of freedom
- Material: acrylic
- For: 8 years and above
- Weight: ~ 450 g
- Does not include servos but it is imperative to have 4 micro servos sg90 to be able to mount it
More informations:
1. 4 arm axes with more untrammeled and flexible experience.
2. Most of the pieces are integrated in a perforated way at a time, which is very strong and easy to install.
3. All movement joints are using high quality bearings with good precision.
4. 4 full axes moving to make additional extension and support the 180 ° robot servo.
Helpful Links:
User manual for the assembly of the Robot acrylic arm
 

NOTE: Servos and controllers are not included, but 4 sg90 micro servos are required to mount it.

Customers who bought this product also bought

Rain Sensor Module Water Droplet Detector

The module has two outputs: analog A0 and digital D0.
digital output D0 - signal 0 or 1 appears depending on the configuration of threshold.
The threshold is fixed with the potentiometer. Characteristic: - Operating voltage: 3.3V -5 V - Sensitivity adjustable by potentiometer
- Dual output mode: analog and digital
- Red LED - power indicator
- Green LED - digital switching output indicator
- Measurements PCB: 3 x 1.5 cm
- Sensor measurements: 5.4 x 3.9 cm

S0022

Price €1.40

Rechargeable Battery Samsung INR18650 2500mAh Li-ion

Rechargeable Battery Samsung INR18650 2500mAh Li-ion 3.7V 20A unprotected features:
IMPORTANT: This battery does not have a protection circuit.
Use it at your own risk.
Do not charge over 4.2V
Do not discharge below 3V
Do not change polarity
Do not heat the battery, or expose it to high temperatures
Do not wet or expose to environments of High humidity
For long periods of storage it should be stored below 45 ° C
After long periods of storage you will probably need to do some charging cycles to increase the capacity again.
Quantity: 1 unit
Nominal capacity: 2500mAh (0.2C, 2.75V discharge)
Minimum capacity: 2450mAh (0.2C, 2.75V discharge)
Charging voltage: 4.2 ± 0.05 V

PP030

Price €5.44

Ultrasound Distance Sensor HC-SR05

Ultrasonic sensors overcome many of the weaknesses of IR sensors by providing distance measurement regardless of the color and illumination of obstacles. Ultrasound Distance Sensor HC-SR05 features:
- Power supply: 4.5-5.5 VDC
- Supply current: 10 to 40 mA
- Activation pin format: 10 μs digital pulse
- Echo Pin Output: 0-Vcc
- Echo Pin Format: the output is DIGITAL and directly proportional with range. See our conversion formula below
- Measurement range: 2cm to ~ 4.5m
- Measurement resolution: 0.3cm
- Measurement angle: up to 15 degrees
- Measurement speed: 40 Hz,
- Connector: standard 5-pin male connector that can be connected directly to boards or breadboards:
- 1: VCC
- 2: Trig
- 3: Echo

S0047

Price €1.61

TCRT5000 Module 3.5cm IR infrared sensor

The optical (reflective) module sensor with LM393 comparator, which detects obstacles with high accuracy. The ideal detector for obstacle detection for the installation of intelligent robots.TCRT5000: reflective optical sensor that has a compact construction where the light emitter and receiver are placed in the same direction to detect the presence of an object using infrared reflection on the object. The transmitter is an infrared LED and the receiver is a phototransistor. The sensor allows the detection of an object at a distance of up to 3.5 cm from the white paper and 1 cm from the person's finger.

S0138

Price €1.40

Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth

ESP32 processor development board with WiFi and Bluetooth (BLE) compatible with Arduino Uno shields. It is much faster than the ESP8266 processor (NodeMCU and the like) . Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth features:
Power: 5-12VDC WiFi 802.11 b / g / n / e / i (802.11n up to 150 Mbps) Bluetooth v4.2 BR / EDR and BLE. Compatible with Arduino Uno shields. 6 Analog input. 20 digital inputs / outputs (3.3V) (with PWM functions, interrupt). UART, SPI, I2C communication. Size: 68Ã — 53 mm Micro USB connection. 4Mbytes Flash Memory 520Kb Clock: 240Mhz (a core dedicated to WiFi processing) Temperature: -40C + 85C Current: 250mA (max) Current in saving mode: 0.15mA Operating current: 20mA (without WiFi) Useful links for Arduino / Raspberry programming and projects with Arduino /

W0094

Price €8.22

IR Remote Control + IR Infrared Receiver VS1838

IR Remote Control + IR Infrared Receiver VS1838 features:
- The test distance is about 5-8 meters, but practical application depends on environmental factors (such as diaphragm, glass , obstructions or other material blockage) - The CHQ1838 / HX1838 receiver receives the 38kHz signal
- Vcc supply: 3.3V-5V
- IN digital output to connect to the port Arduino I / O
- Remote measurements 85x 40x 5mm
- Includes battery
Useful links for Arduino / Raspberry programming and projects with Arduino boards / Raspberry:
Send / Receive information via IR
- Wiring of the IR Remote control + Infrared IR Receiver VS1838 with the UNO module
- Light a 3mm red LED by Infrared

W0021

Price €2.06
€17.35

17,35 tax excl.

Out of stock
Do you want to receive an alert when product is back in stock?
 
We will send you an email once the product becomes available. Your email address will not be shared with anyone else.
Price €17.35

Order until 4pm we will send today
30 days return