RGB LED Strip WS2812B Black 1m 30 LED/M IP65 RGB LED Strip WS2812B Black 1m 30 LED/M IP65 features: - RGB LED WS2812B - WS2812B are LEDs that have integrated logic, making it possible to vary the color of each LED in a way individual - WS2812B includes a built-in inside each LED, which allows each pixel to be accessed individually - For this reason, these types of LEDs are called individually indexable. - They are based on the 5050 LEDs - 30 individually indexable LED diodes - 24-bit color control (8-bit PWM per channel) - 16.8 million colors per LED - Communication One-wire - Power: 5 V - Width: 11 mm - Thickness: 2.6 mm - Length: 1 meter - Consumption: 1.8A (all white) - Waterproof - With 3M adhesive Code P0101 Available Price €9.75
Kit Beetle - Robot Maqueen The Maqueen Mechanic-Beetle kit includes a metal servo, mechanical parts, screws and more. With a simple installation, your Maqueen car is ready to go. Use this kit to turn your Maqueen Lite and Maqueen Plus into a Mechanic Beetle! This play and learn kit comes with a wealth of mechanical knowledge. Come and find the most fun and interesting ways to play with Maqueen in this kit. Code DF006 Last items in stock Price €14.89
CP2102 USB 2.0 A RS232 Converter UART TTL Serial Ideal for connecting TTL RS232 devices to your PC through the USB port. CP2102 USB 2.0 A RS232 Converter UART TTL Serial features: - Controller CP2102- 5 pins: 3.3v, 5.0v, TxR, RxD, GND- Standard USB type to male and 5 pin TTL connector- 3 Status LEDs: Power, RX and TX- USB 2.0 specification with 12Mbps maximum speed Code C0001 Available Price €3.70
Kit 2x Blue Aluminium and Gold flat metal heatsinks For Raspberry Pi 2 and Pi 3, B and B +. Each heatsink includes thermal sticker. Kit 2x Blue Aluminium and Gold flat metal heatsinks features: 1 blue aluminum heatsink: - Dimensions: 9x9x12mm 1 flat metal sink gold color: - Dimensions: 12x12x1mm Code RA022 Available Price €1.49
Mosfet 24V 5A IRF520 PWM controller Mosfet 24V 5A IRF520 PWM controller features: - The IRF520 controller module can control the PWM signal from the Arduino module and adjust the DC voltage of So that we can control the speed of the DC motor, the brightness of the bulb, the LEDs, the heater. - The built-in IRF520 N-MOSFET transistor - Operating voltage: 3.3V -5V ( compatible with ARDUINO Raspberry PI) - Charging voltage: 0-24V - Charging current: up to 5A (more than 1A, the system must be equipped with a heat sink point) - 60W max power (more than 10W must be equipped with a heat sink) - Terminalblock connectors - LED indicating the presence of power - Dimensions: 33x24mm Code A0022 Available Regular price €2.49 -€0.50 Price €1.99
Rotary Encoder EC11 with Push Button Switch It can be used to control the microprocessor of the Arduino AVR PIC system and others, or as a digital potentiometer rotating the rotary encoder can be counted in positive and negative, depending on the direction of rotation; with the button of the rotary encoder can be reset to its initial state, which starts counting from 0. Code M0012 Available Price €1.39
Sensor SCT-013-030, Non-Invasive 30A AC Current Meter The sensor measures the current flowing in the cable without cutting it. The measurement is made on a single insulated wire, the output is an analog voltage from 0 to 1 V. Sensor SCT-013-030, Non-Invasive 30A AC Current Meter features: Input current: 0 to 30A AC Output voltage: 0 to 1 V AC Built-in load resistance: 62 Ω Winding ratio: 1800: 1 Operating temperature range: -25 ° C to 70 ° C Cable length: 1 m Sensor weight: approximately 45 g Sensor SCT013-030 datasheet Code M0203 Available Price €6.49
Raspberry Pi Sense HAT Sense HAT is your absolute classic used for a well-known and popular Astro Pi projects. It features set of sensors (Pressure, humidity, IMU and temperature) and a great 8x8 LED screen. It is a full set for your Raspberry - you can both measure your projects environment, display it on the screen as well as manouver and input data with joystick and buttons included on the HAT. Code RA999 Available Price €46.99
BBC micro:bit V2.2 - WiFi Single Board Micro-Computer, BLE 5.0, Microphone + Speaker + Accelerometer The novelty of micro:Bit v2.2 for a more lively introduction to technology for children. The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker. It contains a quick start guide in the same package. Code B0120 Available Regular price €20.95 -€1.00 Price €19.95
KittenBot Silicone Kitty Case orange for micro:bit Protective silicone case Kittenbot used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Code RA177 Backorder Price €4.90
Robot Maqueen - Loader Maqueen Loader (ROB0156-L) includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as metal servo, mechanical parts, screws. Just a simple installation, then your Maqueen Car is ready to go! This play-and-learn kit comes with rich mechanical knowledge, which could allow students to benefit a lot from hands-on practices! Come and find more fun and interesting ways to play with Maqueen in this kit. Code DF011 Available Price €14.89
SparkFun micro:climate kit for micro:bit - v3.0 The SparkFun micro:Climate kit is a complete weather station kit that builds on the weather:bit carrier board with weather and soil moisture sensors, all powered by the micro:bit. board. Code SP073 Available Price €179.00
Micro:Bit shield Functional IObit v2.0 expansion card IObit v2.0 Expansion board for the micro:bit minicomputer. It allows the connection to all the connectors of the minicomputer through pins.There is also a buzzer on the board. On the back of the module there is a description of the connectors. Code RA044 Available Price €9.99
Ring:bit Car v2 Kit : DIY programming smart car for micro:bit The ELECFREAKS Ring:bit Car is a small DIY smart car powered by the BBC micro:bit. Manual installation can better exercise children's skills. The makecode graphical programming blocks allow children to learn programming from simple to complex in a fun way. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0102 Available Price €29.49
Keyestudio Microbit Starter Smart Home Kit This smart home kit is based on the open source micro:bit hardware and is intended for those who want to create smart home projects that improve the comfort of the home through technology. The kit has been launched by Keyestudio. The kit does not include the micro:bit board. Code RA170 Available Regular price €82.99 -€17.00 Price €65.99
Green silicone protective cover for BBC Micro:Bit Protective cover used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Weight: 10g Size: 5,65 cm * 3,7 cm Material: gel silica (environmental protection material) Code RA139 Last items in stock Price €4.50
2x AAA 3V battery holder for Micro:bit Weight: 12.7g Box size: 62 * 25 * 10 mm Code PP037 Available Price €1.99
Micro:bit gold finger adapter Size: 57.0mm * 23.6mm Weight: 9.8g Code RA041 ✗ Out-of-Stock Price €5.75
micro:bit Smart Health Kit With the micro:bit Smart Health Kit you will build items such as UV light detections, sitting posture reminder, alcohol detector, smart bin and more, from which we can learn how to program and how to maintain healthy living habits in a scientific way. Code EL0116 Last items in stock Price €59.90
Power supply shield for BBC Micro:Bit This expansion board comes with two interfaces, which can access two-cell batteries, each supplying 1.5V. It also comes with a DIP switch to control the power input. In the experiment, you can connect the expansion card and the micro: bit development card using a JST red-black cable -PH2.0MM-2P 24AWG dual-head to supply power for the micro: bit development board. Code RA042 Available Price €8.90
Silicone Case for HuskyLens When using the HuskyLens, you may encounter accidental drops, bumps, etc. Now we have carefully designed this silicone case to protect your board. Note: This product does not include the HuskyLens board. Code DF014 Available Price €6.99
1.8 inch SPI TFT LCD screen for Micro:Bit A perfect LCD display for your Micro:Bit - review detailed information. This is a colour display module designed for the BBC micro:bit, 1.8 inches diagonal, 160x128 pixels, capable of displaying 65K colours. Code RA060 Available Price €23.95
Gravity: Huskylens PRO - An easy-to-use AI camera | vision sensor Huskylens PRO is an easy-to-use AI camera and vision sensor. DFrobot Huskylens (SEN0336) is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, colour recognition and label recognition (QR code). Code DF020 ✗ Out-of-Stock Price €95.95
ELECFREAKS BitBoard Kit Turn everything into a "keyboard" thanks to the Bitboard. Code EL0117 Available Regular price €35.90 -€6.00 Price €29.90
Keyestudio Shield Sensors V2 micro:bit Keyestudio Shield expansion board for the micro:bit. Allows connection to all outputs of the minicomputer via pin strip. Shield v2.0 for micro:bit incorporates 44-pin connectors to facilitate the connection of the various sensors to the minicomputer. Code RA165 Available Price €9.45
KittenBot Silicone Kitty Case yellow for micro:bit Protective silicone case Kittenbot used for micro: bit. The cover has two different sides, dot matrix display area, finger usage area on the front. Micro USB interface, power interface and reset button on the back side. It can be installed on a micro: bit board to make your work more charming and fun. Code RA176 Available Price €4.90
Basic kit : micro:bit sensor kit for beginners With this basic kit you will help students understand the use of electric bricks from the very beginning. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors for use and no soldering is required. Code EL0100 Last items in stock Price €29.49
Gravity: Huskylens - An easy-to-use AI camera | vision sensor Huskylens is an easy-to-use AI camera and vision sensor. DFrobot Huskylens (SEN0305) is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, colour recognition and label recognition (QR code). Code DF013 Available Price €71.49