SparkFun Pi AVR Programmer HAT - OBSOLETE You are looking for an easy way to program a microcontroller in your Arduino. It has never been easier - with this board you can do it in the record speed with support or Raspberry (or without for that matter, as the HAT works on the standalone basis as well). It was first developed as an in-house solution for Sparkfun production, and for its quality and usefulness ended up in mass production with a solid fan following. The board includes several handy features ranging from the capacitive touch button for a standalone mode to launch programming, LEDs indicating the status of the program upload as well as some whiteboard labels to keep track of your projects. Code SP0017
500cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver 500cm HDMI V1.4 FullHD 3D Video Ethernet Male Gold Silver features: - HDMI Cable V1.4 FullHD, 3D Video - Allows the possibility of sending and receiving data through a connection Ethernet built into the cable itself with speeds up to 100 Mbit / s - Type A male on both ends - High quality gold shielded connectors - Manufactured with copper conductors (OFC-Oxygen Free Copper- 99.99% copper) of high quality that guarantees the highest transmission quality - Refresh rates up to 120Hz - Length: 500cm - Quantity: 1 unit Code RA038 Available Regular price €6.99 -20% Price €5.59
T-Cobbler GPIO KIT + 40-pin Grey Flat Cable Pi B+ RPI 2 RPI 3 RPI Zero T-Cobbler GPIO KIT + 40-pin Grey Flat Cable Pi B+ RPI 2 RPI 3 RPI Zero features: - Shield to connect with breadboard - Dimension: 6 x 7.3x 1.9mm - Flat cable female / female 40 pins - Total length: 25cm - Quantity: 1x shield 1x flat cable Code RA010 Available Price €5.94
Kit 3x Blue, Green and Gold colored flat metal aluminum heatsinks For Raspberry Pi 2 and Pi 3, B and B +. Each heatsink includes a thermal sticker. Kit 3x Blue, Green and Gold colored flat metal aluminum heatsinks features: 1 blue aluminum heatsink: - Dimensions: 9x9x12mm 1 flat gold metal sink: - Dimensions: 12x12x1mm 1 green aluminum sink: - Dimensions: 19x19x8mm Code RA023 Available Price €1.99
Kit Raspberry Pi 3 B+ Media Center Kit The Raspberry Pi 3 Model B+ is the latest product in the Raspberry Pi 3 range. Característica: Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @> Code B0064 ✗ Out-of-Stock Price €109.00
Pimoroni Unicorn HAT HD Pimeroni Unicorn HAT HD is one of the most popular and at the same time easiest to use Raspberry HATs in Pimoroni offering. Compared to the Unicorn HAT it is equiped with twice as many LEDs in a row and a column giving a matrix of 256 LEDS! All of this accessible in a really straight forward way and supported by a range of Python libraries available on github and officially issued by Pimeroni. The hat is compatible with all Raspbery boards given its universal 40 GPIO pinout Code PI005 Last items in stock Price €49.99
Pimoroni Scroll pHAT HD - Red This HAT for Raspberry has a lot of individual LED pixels to use it as a scrollable display. Control the brightness of its 119 pixels (17x7) individually by PWM and create animations or texts. Code PI011 Available Price €21.89
3.5 inch LCD TFT Acrylic Case for Raspberry Pi Plastic box compatible with Raspberry Pi B +, Raspberry Pi 2 and 3. Perfect to protect your Pi. It is perfectly mechanized to give access to all the ports of the Raspberry. Intended for use with a 3.5-inch screen, reference in our store: RA020 3.5 inch LCD TFT Acrylic Case Code RA018 Available Regular price €4.40 -25% Price €3.30
32GB Class 10 MicroSD memory card with adapter 32GB Class 10 MicroSD memory card with adapter features: - Capacity 32GB - Class 10 - Dimensions of the microSD 11 mm x 15 mm x 1 mm - FAT32 format - Operating temperature -25 ° C to 85 ° C - Storage temperature -40 ° C to 85 ° C - Voltage 3.3 - Includes adapter Code V0014 Available Price €5.99
Copper Adhesive Dissipator For Raspberry Pi 2 and Pi 3, B and B +. The heatsink includes a thermal sticker. Characteristic: - Dimensions: 13x12x5mm - Quantity: 1 unit Code RA006 Available Price €1.49
Flat Cable GPIO 40 Pins M/F Flat Cable GPIO 40 Pins M/F features: - For Raspberry Pi 2 and Pi 3, B and B + - Total length 20cm - Quantity: 1 unit Code RA007 Available Price €2.85
SparkFun XBee Explorer Dongle SparkFun XBee Explorer Dongle enables the communication between your computer and any XBee device, as in case of any XBee device, without any cables! The module is compatible with Series 1, Series 2.5 and standard Pro version with voltage regulator functioning with the current up to 500 mA. Code SP039 Last items in stock Price €33.99
Raspberry Pi 2-3 Model B Multifunction Expansion GPIO Module This module is used to extend the Raspberry's 40 GPIO pins to another set of 2x20 male pins and 8 parallel pins accessible on the terminal blocks in the that test leads are pushed. The electronic board offers great reliability with the Raspberry and is very easy to connect thanks to its existing suitable accessories but not included. The module offers a set of mini jumpers to configure the GPIO. Code RA016 Available Price €7.95
Official Raspberry Pi Mouse, Black, Wired Official Raspberry Pi Mouse USB with wheel. Compatible with all Raspberry Pi products. Code RA171 Last items in stock Price €9.99
Gravity: IO Expansion Shield for Arduino V7.1 Gravity: IO Expansion Shield for Arduino V7.1 is a shield board for Arduino that expands the capabilities of the I/O pins. Among other things, it has each pin with a power pair, the ability to include a 3.3 V voltage converter, a separate connector for I2C interfaces, SPI and a socket for XBee modules. Code DF027 Available Price €14.95
OTG Reader USB 2.0 USB 2.0 USB-A and microUSB card reader/writer Black Micro-SD / TF card adapter with USB 3.0 type A connector. Allows you to transfer data from the card to your desktop and laptop. Supports microSD / T-Flash, microSDHC cards. The reader in combination with a micro card can serve as a pen drive. Code K0329 Available Price €2.89
Edup Mini Dongle WiFi USB For pcDuino 3 Nano Raspberry Pi Edup Mini Dongle WiFi USB For pcDuino 3 Nano Raspberry Pi features: - Interface type: USB - Supports IEEE 802.11e draft 802.11n - Supports USB 2.0, compatible with USB 1.1 and 1.2 - Support systems: - Win2k / XP / Vista / Win7 / Win8.1 / Win10 / Mac / Linux - Operating distance: 91 meters indoors, 275 meters in open space - Transfer rate: 150Mbps (downlink) and 150Mbps (uplink) - Works with old Wireless-G and Wireless-B networks - WEP and WPA encryption - 64-bit / 128-bit WEP (Wired Equivalent Privacy), TKIP, AES 2,400GHz ISM - Frequency range: 2.4 to 2.4835 GHz - Operating channels: 13 - Support network protocol: CSMA / CA with acknowledgment - Transmission mode: DSSS Code RA015 Available Regular price €8.49 -€2.00 Price €6.49
Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin features: - Shield module for Raspberry Pi 2 and Pi 3, B and B + Code RA013 Available Price €6.85
Retroflag NESPi Case for RetroPie Raspberry PI with 2x Super SNES Controller This set will make your project look like take out of 80s! Box and two controllers imitate a game console only for 25 EUR. Do you miss old times of Nintendo? You won´t anymore with this great set. It is perfect for a gift as well. Check out product characteristics for further information Code RA052 ✗ Out-of-Stock Price €25.99
Kit Seeed Grove 40 sensors for Arduino The kit includes 40 basic sensors, which will help you to easily kick-start any project. The sensors are featured with a proprietary Seeed Grove connectors enabling easy connection without soldering and a comprehensive guide book with exemplary classes. Code SS003 Last items in stock Price €109.90