3A DC Converter 4-53V Adjustable LM2596H Step Down Source

This module is a voltage regulator that creates an output voltage of 5V with a maximum current of 800mA. The integrated regulator is referenced AMS1117.
The module has two two point connectors for quick connection. Converter module AMS1117 Buck fixed output 5V 800mA features:
- Based on the regulator AMS1117-5V
- Input voltage: 4.5-12VDC
- Output voltage: 5VDC (+/- 0.05V)
- Max output current: 800mA
- Operating temperature: -40C to + 150C
- PCB size: 25x12 mm

AMS1117 Buck fixed output module 3.3V 800mA features:
- Based on AMS1117-3.3V regulator
- Input Voltage: 4.5 - 12Vdc
- Output Voltage: 3.3 Vdc (+/- 0,05V)
- Max.output current: 800mA
- Operating temperature: -40ºC to + 150ºC
- Dimensions: 25mm x 12mm

Mini DC Converter 1.8A Downstream Voltage Regulator 4.7-23V to 1.0-17V features:
- Voltage Drop Module
- Use a multimeter to check the output voltage and adjust the potentiometer
- Small size: 17mm x 11mm
- Input voltage: 4.75-23V
- Output voltage: 1.0-17V
- Current output: 1.8A (peak max. 3A)
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 240kHz
- Conversion efficiency: up to 96%
- Output ripple: 30mV (no-load) - Voltage regulation: ± 2.5%

Descripción:
Chip XL4015 - Upgrade of the LM2596
Drop module
Use a multimeter to check the output voltage and adjust the potentiometer
Voltage control
XL4015 DC Voltage Converter 5A 75W Step Down Regulator DC LM2596 features:
- Input voltage: 4.5V-38V
- Output voltage: 1.25-36.5V
- Current output: 4.5A (max 5A)
- Output power: 75W maximum
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 180KHz
- Efficiency conversion: up to 96%
- Short circuit protection: Yes (limited current 8A)
- Protection over temperature: the output switches off automatically
- Size: 62mm x 38mm x 15mm
Principal functions:
- Step-down converter with overcurrent protection
- Li-Po battery charger, Li-Ion

DC Step Down Converter 3.3V 2A 3.4-6V features:
- Voltage drop module
- Input voltage: 3.4-6V
- Output voltage: 3.3V
- Current output: adjustable, max 2A
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 1.5MHz
- Efficiency conversion: up to 95%
- Short circuit protection: Yes (limited current 8A)
- Protection over temperature: the output switches off automatically
- Size: 12 x 15 mm
- Full charge output ripple: Vpp <50 mV
- Output accuracy: ± 0.1V
- Current IQ without load: 0.2mA
- Stop current (EN) <10uA

This low-pass voltage converter includes 5 functions in one module. It can be used as a voltmeter, ammeter and measurements can be recovered through its USB port.
The output voltage and voltage can be adjusted thanks to two potentiometers present in the module.
It has an efficiency Very high, it has a display screen for voltage, current and two buttons to configure what you want to see. Characteristic: - Voltage of input: 5.5 - 36 V
- Output voltage: 1.25-32 V continuously adjustable
- Output current: 4.5 A (Max 5A for a short time) adjustable with potentiometer,
- Power output: 75 W maximum (recommended to use 50 W, large pressure difference, please reduce power)
- Operating temperature: -40 ° C - + 150 ° C

Descent module.
Use a multimeter to check the output voltage and adjust the potentiometer.
Control of tension.
LM2596 DC Voltmeter Converter 3A Step Down Adjustable Power features:
- Input voltage: 4.5-38V
- Output voltage: 1.25-36.5V
- Current output: 2A (max 3A with heat sink)
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 150KHz
- Efficiency conversion: up to 92%
- Load Regulation: +/- 0.5%
- Voltage Regulation: +/- 2.5%
- Protection over temperature: the output switches off automatically
- Size: 62mm x 38mm x 15mm
Principal functions:
- Step-down converter with overcurrent protection
- Voltmeter up to 40V, remember to set the input voltage to 4.5V

This power supply delivers an output voltage lower than that of the input and allows power loads up to 10A.
It has its heat sink, it is Recommended to use it for loads up to 8A for optimal cooling.
Includes its foot protection kit, which greatly facilitates heat dissipation and use. 10A DC-DC Converter Adjustable Downstream 8V-40V to 1.25V-36V features:
- Input voltage: DC 8V-40V
- Output voltage: DC 1.25V-36V adjustable with potentiometer (can only be used as a reducing module, the input must be higher than 1.25V output)
- Output current: 8A (Max 10A for a short time), adjustable with potentiometer. Below 5A it can cool naturally
- Output power: Max 150W
- Key components:
- Electrolytic capacitors 470µF - 50V

Descent module.
Use a multimeter to check the output voltage and adjust the potentiometer.
Control of voltage and current.
DC Step-Down Converter 5A 4-38v to 1.25-36v XL4015 LED LiPo features:
- Input voltage: 4-38V
- Output voltage: 1.25-36V
- Current output: adjustable, 4.5A (max 5A)
- Output power: 75W maximum
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 180KHz
- Efficiency conversion: up to 96%
- Short circuit protection: Yes (limited current 8A)
- Protection over temperature: the output switches off automatically
- Size: 62mm x 26mm x 14mm
Principal functions:
- Step-down converter with overcurrent protection
- Li-Po battery charger, Li-Ion

DC Step-Down Converter 5A 4-38v to 1.25-36v XL4015 LED LiPo. Control of voltage and current.
Use a multimeter to check the output voltage and adjust the potentiometer.