2x PCF8574P I/O Extension Board 8574 NXP
  • 2x PCF8574P I/O Extension Board 8574 NXP

2x PCF8574P I/O Extension Board 8574 NXP

T0010

- The PCF8574P is an 8-bit remote I / O expander for the I2C bus with 16-pin DIP packet interrupt. - Provides general-purpose remote I / O expansion via a two-wire, two-way I2C bus (Serial Clock (SCL), Serial Data (SDA)).
- Devices consist of eight quasi-directional ports , 100KHz I2C bus interface, three hardware address inputs and interrupt output operating between 2.5V and 6V.
- Quasi-bidirectional port can be independently assigned as one input to monitor interrupt status or keyboards or as an output to activate indicating devices like LEDs. - System Master can read from the input port or write to the output port through a single register.

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

2x PCF8574P I/O Extension Board 8574 NXP description

- The PCF8574P is an 8-bit remote I / O expander for the I2C bus with 16-pin DIP packet interrupt.
- Provides general-purpose remote I / O expansion via a two-wire, two-way I2C bus (Serial Clock (SCL), Serial Data (SDA)).
- Devices consist of eight quasi-directional ports , 100KHz I2C bus interface, three hardware address inputs and interrupt output operating between 2.5V and 6V.
- Quasi-bidirectional port can be independently assigned as one input to monitor interrupt status or keyboards or as an output to activate indicating devices like LEDs.

- System Master can read from the input port or write to the output port through a single register.
- The Low current consumption of 2.5μA (typical, static) is ideal for mobile applications and blocked output ports for to drive LEDs directly.
- Internal Power Reset (POR) initializes I / O as inputs with a weak internal pull up current source of up to 100μA.

2x PCF8574P I/O Extension Board 8574 NXP features:

- I2C bus to parallel port expander
- Remote 8-bit I / O pins which by default are inputs at power on
- Full capacity packet sink sink
- Active low open drain interrupt output
- Eight programmable slave addresses using three address pins
- Low standby current is typically 2.5μA < br /> - Operating temperature range -40 ° C to 85 ° C
- Offers ESD protection
- Quantity: 2 units

Customers who bought this product also bought

DHT22/AM2302 Temperature Humidity Sensor

The DHT22 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement.
This sensor, unlike DHT11, is capable of measuring negative temperature values ​​and measures tenths of a degree. DHT22/AM2302 Temperature Humidity Sensor features:
- Voltage Operating: 3 to 5.5 VDC
- Humidity measurement range: 0-100% ± 2% accuracy
- Temperature measurement range: -40ºC to 80ºC ± 0.5º accuracy - Maximum sampling rate: 2 seconds

S0018

Price €3.26

XM-15B Bluetooth Serial Port Module Master Slave Arduino compatible HC-05/06

XM-15B Bluetooth Serial Port Module Master Slave Compatible Arduino HC-05/06 features:
* Power 3.0V -6V
* 3.3V / 5V logic levels
* Bluetooth version V2.1 + EDR
* Frequency: 2.4GHz ISM band
* Reach approx. 30m
* Security: Authentication and encryption
* Supports AT commands for configuration through a serial port
* Working temperature: -20 ºC to +75 ºC
* Working current - 50 mA
* PCB dimension: 35 x 19m -Using the conventional Bluetooth CSR chip, the protocol standard Bluetooth V2.1 + EDR, passes the Bluetooth BQB certification
-Fast start, only 0.3 seconds to complete the initialization of the complete module (including the Bluetooth protocol stack)
- Built-in hardware protector, never hangs

W0022

Price €6.19

MG996R Metal Gears Digital Servo High Power Equivalent 12Kg 6V

High power digital servo, better precision than the MG995. MG996R Metal Gears Digital Servo High Power Equivalent 12Kg 6V features:
- Operating voltage: 4.8 V to 7.2 V
- Consumption: 100mA
- Torque max.: 12kg / cm (6V)
- Operating speed: 0.22sec / 60degree (4.8V), 0.19sec/60degree (6V)
- Max. Radio: 180ºC
- Temperature range: 0-55 degrees
- Weight: 55 g
- Cable length: 29cm
- Dimensions: 54 x38x 20 mm
- Servo connector: JR (JR and Futaba adaptable)

R0016

Regular price €7.40 -€1.00 Price €6.40

Tower Pro Micro Servo 9g SG90 360 degree

Tower Pro Micro Servo 9g SG90 360 degree features:
- Operating voltage: 3.0-7.2V
- Speed (4.8V without load): 0.12sec / 60 degrees
- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)
- Working temperature: -30 to +60 degrees C
- Cable length: approx. 23cm
- Includes photo accessories and screws
- Dimensions: 22x11.5x27mm

R0075

Price €2.44

Power Supply DC 5V 6A 30W

Power Supply DC 5V 6A 30W features:
- Supply voltage: 110 / 230V AC
- Output voltage: 5V DC - Output amperage: 6A
- Power at 5V: 30W
- Dimensions: 110mm x 78mm x 36mm

A0085

Regular price €10.66 -€2.00 Price €8.66

28BYJ-48 Stepper Motor 12V + Driver Board ULN2003

28BYJ-48 Stepper Motor 12V + Driver Board ULN2003 features:
- Stepper motor 28BYJ-48 + ULN2003 controller
- The 28BYJ-48 has everything you need to start using motors step by step in your project
- A stepper motor converts digital impulses into small steps of movement in one direction
- The motor also comes with a ULN2003 motor controller card
- Can control two DC motors or a motor with bipolar steps with a maximum amperage of up to 500 mA
- Equipped with state indicator LEDs A, B, C, D
- Engine model: 28BYJ-48
- Phasing Engine: 4
- Operating voltage: 12V DC
- Frequency: 100 Hz
- Operating current: 200mA
- Max Power: 20W
- Winding resistance: 70 Ohm
- Angle per step: 5,625º
- Steps per round: 64

R0036

Price €2.44
€0.95

0,95 tax excl.

1
30+ items
Price €0.95

The minimum purchase order quantity for the product is 2.

Order until 4pm we will send today
30 days return