IR Remote Control + IR Infrared Receiver VS1838
  • IR Remote Control + IR Infrared Receiver VS1838
  • IR Remote Control + IR Infrared Receiver VS1838
  • IR Remote Control + IR Infrared Receiver VS1838
  • IR Remote Control + IR Infrared Receiver VS1838

IR Remote Control + IR Infrared Receiver VS1838

W0021

IR Remote Control + IR Infrared Receiver VS1838 features:
- The test distance is about 5-8 meters, but practical application depends on environmental factors (such as diaphragm, glass , obstructions or other material blockage) - The CHQ1838 / HX1838 receiver receives the 38kHz signal
- Vcc supply: 3.3V-5V
- IN digital output to connect to the port Arduino I / O
- Remote measurements 85x 40x 5mm
- Includes battery
Useful links for Arduino / Raspberry programming and projects with Arduino boards / Raspberry:
Send / Receive information via IR
- Wiring of the IR Remote control + Infrared IR Receiver VS1838 with the UNO module
- Light a 3mm red LED by Infrared

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

IR Remote Control + IR Infrared Receiver VS1838 features:

- The test distance is about 5-8 meters, but practical application depends on environmental factors (such as diaphragm, glass , obstructions or other material blockage)
- The CHQ1838 / HX1838 receiver receives the 38kHz signal
- Vcc supply: 3.3V-5V
- IN digital output to connect to the port Arduino I / O
- Remote measurements 85x 40x 5mm
- Includes battery

Useful links for Arduino / Raspberry programming and projects with Arduino boards / Raspberry:

Send / Receive information via IR

- Wiring of the IR Remote control + Infrared IR Receiver VS1838 with the UNO module
- Light a 3mm red LED by Infrared

Realization of a manageable Infrared robot

< br />

- Wiring of the IR Distance remote control + Infrared IR Receiver VS1838 with UNO module
- Fix the remote o IR Distance + Infrared IR Receiver VS1838 in a Mini 2WD DIY Car Robot Kit

Customers who bought this product also bought

2WD Round Car Chassis 2x Ultrasonic Sensor

Contents: - 2x Round transparent chassis plate diameter of 14cm
- 2x DC 5V gear motor
- 2x 6.5cm wheels (Dia .) x 2.6cm (H)
- 2x Encoder discs
- 2x Idlers
- 2x HC-SR04 ultrasonic sensor, distance meter
- 2x Holder for HC-SR04
- 1x Battery holder 2xAA (batteries not included)
- Screws for assembly Motor characteristic: - Voltage: 3 at 6Vdc
- Reducer: 1:48
- No load speed: 100 RPM at 6Vdc
- No load current: 90mA at 3Vdc - 180mA at 6Vdc

R0005

Price €22.45

Water Level Sensor Module One Mega Pic

Easily convert water level to analog signal
The analog output signal can be read directly on the Arduino board
Characteristic:
- Operating voltage: 3.3V -5 V
- Consumption: less than 20 mA - Sensor type: Analog
- Operating temperature: 10º C -30º C
- Detection area: 40 mm x 16 mm
- Dimensions: 60 mm x 20 mm

S0023

Price €1.39

Relay Module 1 Channel 5V 10A

1 Channel 5V Relay Module.
This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL).
Relay Module 1 Channel 5V 10A features:

- Channel: 1
- Supply Voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- LED indicator
- Dimensions: 30x 54mm

RL005

Price €1.29

NRF24L01 + Wireless Transceiver Module 2.4GHz

It is ultra compact and very low consumption. It works at 2.4GHz frequencies (free frequency) and is ideal for telemetry projects, robots, peripheral control, video game control applications, remote temperature sensors, pressure, alarms, etc ... NRF24L01 + Wireless Transceiver Module 2.4GHz features:
- Based on chip NRF24L01 + Ultra Low Power
- Free band: 2.4GHz ISM
- Speed: 250kbps, 1Mbps, 2Mbps
- Working current - reception: 13 mA
- Transmission: 11 mA (900nA -deep sleep mode)
- Receiving sensitivity: -94dB 250kbps
- Coverage in closed spaces: 15m / 30m
- SPI interface
- Input voltage: 1.9V- 3.6V
- Input / output port voltage: 0V-3.3V / 5V
- Coverage in open areas: 100m approx.
- Clock frequency: 16MHz

W0005

Price €1.59

Hotend Long Distance 0.4mm 1.75 E3D Printer 3D

The MK8 nozzle kit for Creality Ender-3, Ender-3S, Ender-3 Pro, Alfawise U20, Alfawise U30 printer.

This kit contains 0.4mm nozzle, cartridge heater: 24V 40W, and NTC thermistor. Serves for filament: 1.75mm. Free comes 5 spare nozzles and 3 silicone insulators for heater block.

I0188

Price €16.79

Electrostatic Brush ZD-155E 180 mm

Use the right tool for every need.
It is a special electrostatic brush for cleaning electronic components or places where the electrostatic charge must be taken into account. Electrostatic Brush ZD-155E 180 mm features:
- Model: ZD-155E
- Brush length: 180 mm
- Hair length: 16 mm
- Number of hair groups: 20

H0136

Price €1.55
€2.49

2,06 tax excl.

Tax included
Price €2.49

Order until 4pm we will send today
30 days return