NE555P DIP8 Precision Timer Integrated Circuit
  • NE555P DIP8 Precision Timer Integrated Circuit
  • NE555P DIP8 Precision Timer Integrated Circuit

NE555P DIP8 Precision Timer Integrated Circuit

T0061

NE555P DIP8 Precision Timer Integrated Circuit features:
- Blister: DIP8
- Number of pins: 8
- Step between pins: 2.54 mm
- Manufacturer: Texas Instrument - Input voltage VCC: 4.5 - 16 VDC
- THRES voltage level: 2.4 - 11.2 VDC
- TRIG voltage level: 1.1 - 5.6 VDC
- RESET voltage level: 0.3 - 1 VDC
- DISCH voltage level change out of state: 0.15 - 0.4 nA
- CONT voltage (open circuit): 2.6 - 11 VDC
- Low level output voltage: 0.1 - 0.4 V
- High level output voltage: 2.75 - 13.3 V - Output current I (O): ± 200 mA
- THRES current: 30 - 250 nA
- TRIG current: 0.5 - 2 μA
- RESET current: -0.4 - 0.4 μA
- Current change DISCH out of state: 20 - 100 nA
OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

NE555P DIP8 Precision Timer Integrated Circuit features:


- Blister: DIP8
- Number of pins: 8
- Step between pins: 2.54 mm
- Manufacturer: Texas Instrument - Input voltage VCC: 4.5 - 16 VDC
- THRES voltage level: 2.4 - 11.2 VDC
- TRIG voltage level: 1.1 - 5.6 VDC
- RESET voltage level: 0.3 - 1 VDC
- DISCH voltage level change out of state: 0.15 - 0.4 nA
- CONT voltage (open circuit): 2.6 - 11 VDC
- Low level output voltage: 0.1 - 0.4 V
- High level output voltage: 2.75 - 13.3 V - Output current I (O): ± 200 mA
- THRES current: 30 - 250 nA
- TRIG current: 0.5 - 2 μA
- RESET current: -0.4 - 0.4 μA
- Current change DISCH out of state: 20 - 100 nA
- Power supply current: 2 - 15 mA - Operating temperature: 0 ° C to 70 ° C
- Storage temperature: -65 ° C to 150 ° C

Customers who bought this product also bought

TP4056 Module Lithium Battery Charger with Protection Micro USB

TP4056 Module Lithium Battery Charger with Protection features:
- TP4056 Li-Ion Micro USB Charger
- Upgraded version of previous TP4056
- Micro USB connection to charge directly from the PC
- Ideal for 18650 batteries
- Based on the TC4056A regulator
- Input Voltage: 4.5V - 5.5V DC
- Full charge voltage: 4.2V +/- 1.5%
- Max Output Current: 1A
- Overvoltage protection 4.2V
- Over discharge protection 2.4V
- LED indicator: charging blue, charging red
- Operating temperature: -10ºC to + 85ºC
- IN + and IN- connection for electronic circuits
- Overcurrent protection: 3A
- Measurements 26 x 19 x 5 mm
- Possibility of current change through Rprog

A0026

Price €1.40

USBASP Atmega8 AVR Programmer Atmega128 Arduino compatible Adapter Cable

Characteristic: - AVR 5V / 3.3V microcontrollers - change the programming voltage through jumper JP1
- LED status indicators - Transmission speed: 5kB / s
- Fuse protector against possible damage to the USB port
- Supported OS: Win ME, Win XP, Vista, Win 7, Win8, Linux
- Works with Bascom, Eclipse, WINAVR, avrDUDE, ARDUINO IDE, ATMEL STUDIO The programmer is compatible with most AVR Atmel processors: - MEGA series 8,16,32,64,218 € ¦
- Tiny series: ATtiny10, ATtiny11, ATtiny12, ATtiny13, ATtiny13A, ATtiny15 € ¦
- CAN series: AT90CAN32, AT90CAN64, AT90CAN128 € ¦
- AT90S2313 series, AT90S2323, AT90S2343, AT90S4414, AT90S4433 € ¦

B0029

Price €5.45

Infrared LED Flame Sensor 5mm

Led infrared sensor.
Detector of the source of fire or flame, can detect a flame or wavelength 760 nm-1100 nm
Particularly sensitive to the flame spectrum.
This optical flame sensor is a device that detects the existence of combustion by the light emitted by it.
Infrared LED Flame Sensor 5mm features:
- Range of light, Distance of 80 cm.
- Angle detection of about 60 degrees,
- This light can be detected by an optical sensor,
- Can be captured by digital inputs and analog inputs of Arduino.

S0132

Price €0.37

2WD Robot Smart Car Chassis 2x Wheels DIY

Ideal for building a car with obstacle detector, light follower
Includes battery compartment for 4 AA batteries and ignition switch. (batteries not included) 2WD Robot Smart Car Chassis 2x Wheels DIY features:
- Voltage: 3 to 6Vdc
- Speed without load: 100 RPM to 6Vdc
- No-load current: 90mA to 3Vdc - 180mA to 6Vdc
- Dimensions of the wheel: diameter 65mm - width 26 mm

R0003

Price €9.50

USB 2.0 A Serial Port Cable Adapter DB9 RS232 Series

An RS232 serial port to your PC through the USB port USB 2.0 A Serial Port Cable Adapter DB9 RS232 Series features:
- CH341 driver
- Supported OS: WinME, Win2003, Win XP, Vista, Win 7, Linux, MAC OS9.0/OSX
- High quality, shielded cable
- Power and data in the same cable, does not require more adapters
- Compatible USB interface 1.1 and 2.0
- Support up to 1 mega data transfer
- Length 73cm The adapter allows you to connect a computer with: - Electric meters
- Decoders, programmers
- Cash registers
- Satellite TV
- Control panels
- Mobile phones
- Diagnostic interfaces for cars
- The administration of Cisco routers

C0010

Price €2.72

Module Relay 12V Light sensor LDR

This module is a three-way switch (COM, NO and NC) that uses the intensity of the ambient light to directly control the output load. Its adjustment potentiometer allows you to change the sensitivity and set the threshold for starting the relay. The relay is energized when it is darker than the threshold.
The optical isolation relay effectively protects the chip and ensures better performance.
This module is used for light detection, brightness detection , control of lamps and automatic equipment. Characteristic: - Channels: 1
- Supply voltage: 12VDC
- Output load capacity: 250V 10A AC / 30V 10A DC
- Relay activation current: & gt; 100mA
- Insulation: Yes
- Indicator LED: Green and Red
- PCB size: 5x2.6 cm / 1.96x1.02 "

RL019

Price €2.88

Related articles on blog

No related article on blog

€0.65

0,65 tax excl.

1
30+ items
Price €0.65

Order until 4pm we will send today
30 days return