SW-520D Vibration Metal Tilt Sensor

AMS1117 Buck fixed output module 3.3V 800mA features:
- Based on AMS1117-3.3V regulator
- Input Voltage: 4.5 - 12Vdc
- Output Voltage: 3.3 Vdc (+/- 0,05V)
- Max.output current: 800mA
- Operating temperature: -40ºC to + 150ºC
- Dimensions: 25mm x 12mm

LED Diode Assortment Kit 40x Red Green Yellow Blue features:
  
- Lens color: Red, green, yellow, blue -difused
- Size: 5 mm
- Operating current: 20mA
- Voltage (red) 1.8V-2.3V
- Voltage (green) 3.2V-3.4V
- Voltage (yellow) 1.8V-2.3V
- Voltage (blue) 3.2V-3.4V
- Anode (A): Positive (long leg): 28mm
- Cathode (K): Negative (shorter leg): 25 mm
- Operating temperature: -25ºC/80ºC
- Welding temperature: + 260ºC
- Quantity: 40 units
      - 10x red
      - 10x green
      - 10x yellow
      - 10x blue

Led module infrared sensor for Arduino
Detector of the source of fire or flame, can detect a flame or wavelength 760 nm-1100 nm
Particularly sensitive to the flame spectrum.
This optical flame sensor is a device that detects the existence of combustion by the light emitted by it.
Infrared LED Flame Sensor 5mm module features:
- 4 Pins Output:
    - A0: analog output
    - D0: digital output
    - GND: ground connection
    - VCC: 5V module power
- Range of light, Distance of 80 cm.
- Angle detection of about 60 degrees,
- This light can be detected by an optical sensor,
- Can be captured by digital inputs and analog inputs of Arduino.

Resistor 2,2K Ohm 5% 0,25W 1/4W features:
-2.2K Ohm
-Type: Carbon film
-Tolerance: ±5%
-Power: 0.25W
-Dimensions: 2x7mm

The novelty of micro:Bit for a more lively introduction to technology for children.

The micro:bit is a pocket computer that can be encoded, customized and controlled for the implementation of digital ideas and games. It measures just 4x5cm and features a fun and easy to use design, so users can create anything from games and animations to slick stories at school, at home or anywhere - all it takes is imagination and creativity. It is fully programmable. This means that each of its LEDs can be individually programmed as can its buttons, inputs and outputs, accelerometer, magnetometer, Bluetooth 5.0 technology, microphone and speaker.

It contains a quick start guide in the same package. 

Resistors 100R Ohm 5% 0,25W 1/4W features:
- 100R Ohm
-Type: Carbon film
-Tolerance: ±5%
-Power: 0.25W
-Dimensions: 2x7mm

Charger 4 x 9V 6F22 with EU Power Supply Cable features:
The everActive NC 109 charger is a unique, specialized design that allows you to charge from 1 to 4 pieces of 9V Ni-MH batteries - each cell is charged individually.
It allows you to charge up to 4pcs of 9V batteries simultaneously, in any configuration / combination, with any capacity, any manufacturer.
The charger has 4 independent charging channels.
The most important features: of the NC109 loader:
- quick charging of a large number of batteries simultaneously - ideal for industrial and professional applications,
- individual LED indicator of charger work for each cell - with full charge signaling,
- 100-240V AC power adapter included, optionally a 12V car adapter is available,

1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino features:
- Channel: 1 (protected with Optocoupler)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator
- Dimensions: 30x 54mm
- Has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)