Soldering Tip Cleaning Ball
  • Soldering Tip Cleaning Ball

Soldering Tip Cleaning Ball

H0010

It allows removing the solder residues from the tips.
It cleans better and does not cause temperature drops like with sponges.
You do not need extra water to clean the tip.
Easy and effective cleaning at the tip.
Soldering Tip Cleaning Ball features:
- Dimensions: diameter 50mm

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Soldering Tip Cleaning Ball description


It allows removing the solder residues from the tips.
It cleans better and does not cause temperature drops like with sponges.
You do not need extra water to clean the tip.
Easy and effective cleaning at the tip.

Soldering Tip Cleaning Ball features:


- Dimensions: diameter 50mm

Customers who bought this product also bought

Arduino compatible Attiny85 Digispark board

Digispark is a development board based on the ATTINY85 microcontroller from ATMEL born in a successful campaign on Kickstarter.
Similar to the Arduino line , It is one of the smallest boards on the market.
Programmable directly from USB with the same Arduino tools. It has a built-in Micronucleus bootloader and can be replaced by similar ones such as the Trinket bootloader. Adafruit or others.
You can use many of the same Arduino libraries and you have your own on the digispark wiki. Arduino compatible Attiny85 Digispark board features:
- USB power supply
- External power supply (7v-35v DC 12v maximum recommended)
- 5V DC 500mA regulator on board
- Programmable with the Arduino IDE
- Loaded with Micronucleus bootloader

B0002

Price €4.05

Motor 28BYJ-48 5V Stepper

The 28BYJ-48 has everything you need to start using stepper motors in your project. A stepper motor converts digital impulses into small movement steps. in one direction Characteristic: - Motor model: 28BYJ-48
- Motor phases: 4
- Operating voltage: 5V
- Frequency: 100 Hz
- Operating current: 200mA
- Max Power: 20W
- Winding resistance: 70 ohm
- Angle per step: 5,625º
- Steps per lap: 64
- Torque: 0.3 Kgr / cm
- Speed: 1900 rpm
- Operating temperature: -45ºC to + 125ºC
- Motor cable length: 19cm
- Motor block diameter: 28mm
- Motor dimensions: 42mm x 32mm x 30mm

R0044

Price €1.89

Momentary Switch Push Button Red N/O 7mm

Momentary Switch Push Button Red N/O 7mm features:
- Momentary pushbutton N/O (normally open)
- Red button
- Dimensions approx. 7 mm x 27 mm
- Recessed with nut and washer
- Load current (supported): 1A to 230V / 2A to 125V
- Drill to embed: 7 mm +/- 0.2
- Operating temperature: -55º to +85ºC

K0156

Price €0.37

MQ-4 Gas Methane Sensor Module for Arduino

MQ-4 Gas Methane Sensor Module for Arduino features:
- Main chip: MQ-4 methane sensor and comparator LM393
- Working voltage: 5V
- Current: 150mA
- Digital output: TTL 0/1
- Analog output: analog voltage sensing value
- Quick response features:
- Detection concentration:
200ppm- 10000ppm CH4, natural gas
- Adjustable sensitivity with the potentiometer
- Size: 32mm x 20mmx 18mm

S0028

Price €2.44

Battery holder 4x AA 6V LR06

Battery holder 4x AA 6V LR06 features:
- Cable 13cm long
- Measurements 62x56x 16mm
- Battery length max 50mm
- Compatible batteries ( LR06, R06, MN1500, AM3, UM3, HP7)

PP003

Price €1.23

CD40106BE DIP14 CMOS Hex Schmitt Triggers Inverter Integrated Circuit

CD40106BE DIP14 CMOS Hex Schmitt Triggers Inverter Integrated Circuit features:
- Blister: DIP14
- Number of pins: 14
- Step between pins: 2.54 mm
- Manufacturer: Texas Instrument - Positive Trigger VP (min): 2.2 - 6.8 VDC
- Positive Trigger VP (max): 3.6 - 10.8 VDC
- Negative trigger VN (min): 0.9 - 4 VDC
- Negative trigger VN (max): 2.8 - 7.4 VDC
- Hysteresis voltage VH (min): 0.3 - 1.6 VDC
- Hysteresis voltage VH (max): 1.6 - 5 VDC
- Input voltage VDD: -0.5 - 20 VDC
- High level input voltage V (IH): 1.5 - 4.2 VDC
- Low level input voltage V (IL): 0.5 - 1.8 VDC
- High level output voltage V (OH min): 5 - 15 VDC

T0054

Price €0.91

Red Laser Line Module Generator 650nm 5mW

Red Laser Line Module Generator 650nm 5mW features:
- Type: red laser diode
- Type of laser: line
- Adjustable Focus
- Wavelength: 650nm
- Output power: 5mW
- Operating voltage: 4.5-5V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130 mm

M0039

Price €3.26

16x2 LCD screen 1602 HD44780 Green background

It consists of a 16-character, 2-row display.
The display is compatible with the HD44780 controller.
Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32. Characteristic: - LCD screen, 16 characters and 2 lines - 5V power supply
- HD44780 compatible controller
- Backlit blue background, black letters
- Include an adjustable contrast pin
- Dimensions (mm): 80 x 36 x 12

PV014

Regular price €2.72 -€0.50 Price €2.22
€1.07

1,07 tax excl.

1
Last 2 items
Price €1.07

Order until 4pm we will send today
30 days return