Thermal tape 20mm type Kapton Characteristic: - Supports up to 280ºC - Electrical and antistatic insulation - Resistant to acidic products and alkaline - Solvent resistant - Adhesive - Length Approx: 26m Code I0053 Available Regular price €4.01 -€1.36 Price €2.65
Desoledring Pump with Heater 40W 220V Desoledring Pump with Heater 40W 220V features: - It allows to remove tin- Easy to use with one hand.- Desoldering pump with heater- Consumption: 40W- CE Certificate- Quantity: 1 unit Code H0098 Available Price €7.84
3x Long Life Soldering Iron Tips Replacement Ø 3.8mm 3x Long Life Soldering Iron Tips Replacement Ø 3.8mm features: - Power: 40W- Rod ø 3.80 mm- Length 70 mm- Long duration tip Code H0015 ✗ Out-of-Stock Price €2.47
2.4 inch TFT LCD screen 240x320 SPI LCD TFT Display Module 240x320 2.4 SPI features: - LCD screen TFT 240x320 pixels- 262,000 possible colors (18 bit)- Pixel: RGB vertical band- Driver ILI9341- SPI interface- 8-bit digital interface, 4-bit control lines- Resistive touch screen 4 - cables- Ideal for projects with ARDUINO, Uno R3, MEGA2560 Helpful Links: Wiring of the TFT LCD screen 2.4 SPI - Connect the TFT 2.4 SPI LCD screen with the UNO module Display graphics and texts on the LCD TFT screen 2.4 SPI Program a touch calculator on the LCD screen TFT 2.4 SPI Code P0001 Available Price €9.88
Microcontroller ATMEGA328P-PU DIP-28 Microcontroller ATMEGA328P-PU DIP-28 features:- Series: AVR® ATmega- Core Processor: AVR- Package / Case: 28-DIP (0.300 ", 7.62mm)- Core Size: 8-Bit- Speed: 20MHz- Connectivity: I²C, SPI, UART / USART- Peripherals Brown-out: Detect / Reset, POR, PWM, WDT- Number of I/O: 23- Program Memory Size: 32KB (16K x 16)- Program Memory Type: FLASH- EEPROM Size: 1K x 8- RAM Size: 2K x 8- Voltage - Supply (Vcc / Vdd): 1.8 V ~ 5.5 V- Data Converters: A / D 6x10b- Oscillator Type: Internal- Operating Temperature: -40 ° C ~ 85 ° CFManufacturer: SGS-THOMSON / ST- RoHS: Yes- Quantity: 1 unit Code T0008 Available Price €4.92
15x Electrolytic Capacitor 10uF 50V 105º C PIC for Arduino 15x Electrolytic Capacitor 10uF 50V 105º C PIC Arduino features:-Type: Electrolytic Capacitor-Assembly: intern-Value: 10uF-Maximum tension: 50V-Maximum temperature: 105º C-Dimensions: 5x11mm-Quantity: 15 units Code D0040 Available Price €0.08
Servo Motor Type S3003 Aeromodelling Servo Motor Type S3003 Aeromodelling features: - Operating voltage: 4.8 V to 6 V - Max torque: 4.1kg / cm (6V) - Operating speed: 0.23sec / 60 degree (4.8V), 0.19sec / 60 degree (6V) - Max radius: 180 ° (90º in each direction) - Temperature range: - 20 + 60 C degrees - Weight: 38 g - Cable length: 26cm - Dimensions: 40.5 x39x 20 mm - Servo connector: JR - Chinese Manufacture Code R0017 Available Price €5.20
Battery holder 2x 18650 3,7V Parallel Lithium Battery Instruction: - The drawing of the polarities is not correct, it is wrong - Put the batteries in parallel Characteristic: - Cable 15cm long - Measures 74x42x 20mm - Weight: 10 gr. (Approx.) - Stack length max 67mm Code PP016 Available Price €1.53
Flux Gel RMA 100cm3 Flux gel 100cm3 of RMA class, intended for SMT assembly and repairs. Flux gel can be applied through a sieve, pattern or from a syringe. Activators utilized in flux manufacturing process enable to leave its remnants after soldering on the package (as far as the process does not include washing phases). Code Q0116 ✗ Out-of-Stock Price €16.44
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0525 ✗ Out-of-Stock Price €9.50
Flux Gel 10ml Based on RMA Colophony Flux Gel 10ml Based on RMA Colophony features: - Flux gel, RMA condensed rosin for non-halide welding, non-corrosive, No Clean, Lead Free, Non-conductive- Shape: gel- Capacity: 10ml- Plastic Packaging- SMT mounting time up to 36 hours- Retains stickiness at 72 hours- Good welding capacity on surfaces: Ag, Cu, Au, Zn, Cd, SnPb- Flux Gel, Soldering Paste, Grease, BGA / SMD / SMT Assembly and repairs Security: - Do not inhale vapors from the bottle or those that come off when welding- Keep out of reach of children- Use in ventilated spaces- Do not eat. Highly flammable toxic (contains alcohols). Rarely irritating to skin contact. Wash with plenty of water Code Q0047 Available Price €5.58
Alcohol PCB Cleaner 1l Type of chemical preparation: alcoholic stripper of printed PCB plates.Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.has low impact on electronic components.Alcohol PCB Cleaner 1l features:- Form: liquid- Capacity: 1l- Alcohol PCB cleanerPCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.The liquid does not affect the substrate or components of the circuit board. Code Q0043 Backorder Price €13.18
Tin dispenser for solder reel Solder dispenser for convenient and faster soldering. Easily supplies you with solder in a fixed structure. Code H0187 Available Price €4.12
Varnish Flux LT-4 - The product protects PCB plates, allows for easier welding- The product protects the printed circuit boards against oxidation and corrosion during storage.- This allows a faster welding and avoids the "cold welding".- The application method allows easy distribution of the product on the plates.- Can be used during production, repair, maintenance and service.Flux Varnish LT-4 Plate Protector features:- Shape: Spray- Capacity: 100ml- Rosin RMA- Meets the requirements of DIN 8511, F-SW-31, PN EN 29454 1.1.1.A.Application:- PCB protection against oxidation,- Applied in the production of printed circuit boards immediately after engraving, Code Q0070 Available Price €4.92
Flux Colophony Rosin Core 40g Flux Colophony Rosin Core 40g features:Flux rosin, solid resin, neutral ph for a correct electronic welding.- They do not cause corrosion of non-ferrous metals- Does not cause short circuitsIt melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners, cleans and prepares the surfaces and components to be welded, and facilitates the adhesion and fluidity of the tin, improving welding in electronics works.Use a toothpick for the application. Do not apply in excess.Security:- Use in ventilated spaces. Do not inhale vapors that are released when welding- Keep the pot tightly closed and out of the reach of children- Do not eat. It is not toxic- Rarely irritating to skin contact Code Q0011 Available Regular price €2.06 -€0.50 Price €1.56
Kontakt PCB PLUS Spray 400ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 400ml features:- Form: spray- Capacity: 400mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0071 Available Price €8.22
Blue cleaning sponge for soldering iron tip Blue sponge to clean the tip of your soldering iron to the tin. Blue cleaning sponge for soldering iron tip features: - Size: 50x35mm,- Material: sponge,- Color: blue,- Quantity: 1. Code H0152 Available Price €0.62
Desoledring Pump with Heater 40W 220V Desoledring Pump with Heater 40W 220V features: - It allows to remove tin- Easy to use with one hand.- Desoldering pump with heater- Consumption: 40W- CE Certificate- Quantity: 1 unit Code H0098 Available Price €7.84
Flux Gel RMA 100cm3 Flux gel 100cm3 of RMA class, intended for SMT assembly and repairs. Flux gel can be applied through a sieve, pattern or from a syringe. Activators utilized in flux manufacturing process enable to leave its remnants after soldering on the package (as far as the process does not include washing phases). Code Q0116 ✗ Out-of-Stock Price €16.44
Helping Magnifying Hand Tool It is a very ideal tool when the third hand is required.Helping Magnifying Hand Tool features:- Magnifying glass diameter 60mm- Weight: 0.5kg- Dimensions: approx. 15 (26) x 17 x 7cm Code H0525 ✗ Out-of-Stock Price €9.50
Flux Gel 10ml Based on RMA Colophony Flux Gel 10ml Based on RMA Colophony features: - Flux gel, RMA condensed rosin for non-halide welding, non-corrosive, No Clean, Lead Free, Non-conductive- Shape: gel- Capacity: 10ml- Plastic Packaging- SMT mounting time up to 36 hours- Retains stickiness at 72 hours- Good welding capacity on surfaces: Ag, Cu, Au, Zn, Cd, SnPb- Flux Gel, Soldering Paste, Grease, BGA / SMD / SMT Assembly and repairs Security: - Do not inhale vapors from the bottle or those that come off when welding- Keep out of reach of children- Use in ventilated spaces- Do not eat. Highly flammable toxic (contains alcohols). Rarely irritating to skin contact. Wash with plenty of water Code Q0047 Available Price €5.58
Alcohol PCB Cleaner 1l Type of chemical preparation: alcoholic stripper of printed PCB plates.Alcohol-based cleaner to eliminate fluxes, dirt removal, flux residues in PCB.has low impact on electronic components.Alcohol PCB Cleaner 1l features:- Form: liquid- Capacity: 1l- Alcohol PCB cleanerPCB cleaner based on alcohol for the elimination of any residue from the printed circuit surfaces after welding, cleaning of the welding unit frames, templates and rosin screens, and the dissolution of the waste stream.The liquid does not affect the substrate or components of the circuit board. Code Q0043 Backorder Price €13.18
Tin dispenser for solder reel Solder dispenser for convenient and faster soldering. Easily supplies you with solder in a fixed structure. Code H0187 Available Price €4.12
Varnish Flux LT-4 - The product protects PCB plates, allows for easier welding- The product protects the printed circuit boards against oxidation and corrosion during storage.- This allows a faster welding and avoids the "cold welding".- The application method allows easy distribution of the product on the plates.- Can be used during production, repair, maintenance and service.Flux Varnish LT-4 Plate Protector features:- Shape: Spray- Capacity: 100ml- Rosin RMA- Meets the requirements of DIN 8511, F-SW-31, PN EN 29454 1.1.1.A.Application:- PCB protection against oxidation,- Applied in the production of printed circuit boards immediately after engraving, Code Q0070 Available Price €4.92
Flux Colophony Rosin Core 40g Flux Colophony Rosin Core 40g features:Flux rosin, solid resin, neutral ph for a correct electronic welding.- They do not cause corrosion of non-ferrous metals- Does not cause short circuitsIt melts with the temperature, spreading through the area to be welded and penetrating into the most difficult corners, cleans and prepares the surfaces and components to be welded, and facilitates the adhesion and fluidity of the tin, improving welding in electronics works.Use a toothpick for the application. Do not apply in excess.Security:- Use in ventilated spaces. Do not inhale vapors that are released when welding- Keep the pot tightly closed and out of the reach of children- Do not eat. It is not toxic- Rarely irritating to skin contact Code Q0011 Available Regular price €2.06 -€0.50 Price €1.56
Kontakt PCB PLUS Spray 400ml The PCB PLUS cleaner is designed for printed circuit boards.Dissolves waste flux, including resin.The liquid does not attack the substrate or the structural components of the printed circuit boards.The special brush to remove particles and smaller debris. Perfect for cleaning PCB after repair and assembly.PCB Plus Cleanser Spray 400ml features:- Form: spray- Capacity: 400mlApplication:- The product does not leave deposits- It evaporates very fast- Eliminates waste after welding- Perfect in any electronic service- The product does not react with most plastics used in electronics Code Q0071 Available Price €8.22
Blue cleaning sponge for soldering iron tip Blue sponge to clean the tip of your soldering iron to the tin. Blue cleaning sponge for soldering iron tip features: - Size: 50x35mm,- Material: sponge,- Color: blue,- Quantity: 1. Code H0152 Available Price €0.62
Desoledring Pump with Heater 40W 220V Desoledring Pump with Heater 40W 220V features: - It allows to remove tin- Easy to use with one hand.- Desoldering pump with heater- Consumption: 40W- CE Certificate- Quantity: 1 unit Code H0098 Available Price €7.84