SparkFun FTDI Basic Breakout - 5V This FTDI breakout is a super small board with a standard FT232RL USB to serial IC circuit. The pinout fits FTDI cable making it compatible with any Arduino or Arduino compatible 5V boards. Code SP023 Available Price €19.99
LCD TFT Display Screen 2.4 240x320 UNO Mega2560 SD LCD TFT Display Screen 2.4 240x320 UNO Mega2560 SD features:- LCD screen TFT 240x320 pixels- Power 2.8-3.3V- 262,000 possible colors (18 bit)- 8/16 bit parallel bus digital interface- LCD Controller: ILI9325- Touch screen controller: XPT2046- Touchscreen, resistive touch screen- Manual use or with any type of pointer- SD card reader- Connector: 2 x 20 pins 2.54mm- Dimensions PCB 75x55 mm- Dimensions LCD 59x42 mm- Ideal for projects with ARDUINO Uno Mega, AVR, STM Code P0005 Last items in stock Price €9.99
16x2 1602 LCD display Blue IIC/I2C LCD display consists of a 16-character, 2-rows. The display is compatible with the HD44780 controller Ideal for projects with Arduino You can use it with PIC, AVR, STM32 and many more controllers. Code P0010 Available Price €3.49
SparkFun FTDI Basic Breakout - 3.3V This FTDI breakout is a super small board with a standard FT232RL USB to serial IC circuit. The pinout fits FTDI cable making it compatible with any Arduino or Arduino compatible 5V boards. Code SP024 Available Price €19.99
Bus Pirate - v3.6a This little board is great for any type of prototyping - enables troubleshooting and debugging of any board with voltage from 0 to 5.5V. The board interprets the commands and sends them further via a proper protocol (ranging from UART through I2C up to HDD44780 LCD). The Pirate lets analyze as well the data sent back from the device to the computer terminal effectively allowing to decipher potential errors. The bootloader installed on the board enables the quick and easy update of firmware and changing the functionality of the board. This board features PIC24FJ64 and FT232RL USB-to-serial chip enabling swift communication over the mini-B USB port. On the other end of the board 2x5 pin header is placed with detailed descriptions of each pin. Code SP037 Last items in stock Price €39.99
2.4 inch TFT LCD screen 240x320 SPI LCD TFT Display Module 240x320 2.4 SPI features: - LCD screen TFT 240x320 pixels- 262,000 possible colors (18 bit)- Pixel: RGB vertical band- Driver ILI9341- SPI interface- 8-bit digital interface, 4-bit control lines- Resistive touch screen 4 - cables- Ideal for projects with ARDUINO, Uno R3, MEGA2560 Helpful Links: Wiring of the TFT LCD screen 2.4 SPI - Connect the TFT 2.4 SPI LCD screen with the UNO module Display graphics and texts on the LCD TFT screen 2.4 SPI Program a touch calculator on the LCD screen TFT 2.4 SPI Code P0001 Available Regular price €11.95 -€2.40 Price €9.55
LCD Display Screen Blue Backlight 20x4 2004 It works exactly the same and with the same libraries as an LCD1602.It consists of a display of 20 characters and 4 rows.Ideal for projects with Arduino.You can use it with PIC, AVR, STM32. LCD Display Screen Blue Backlight 20x4 2004 features:- LCD screen, 20 characters and 4 lines- 5V power- Backlit blue background, white letters Code P0002 Available Price €8.95
FT232 USB to TTL Serial Converter Adapter Module 5V 3.3V + Cable A virtual serial port to your PC through the USB port. FT232 USB to TTL Serial Converter Adapter Module 5V 3.3V + Cable features: - USB-Serial TTL 3.3V -5V Converter - LED indicator for Tx, Rx, power supply - Communication: Transceiver RX / TX TTL COM Virtual RS232 - Voltage: 3.3V or 5V - via jumper - Pins: DTR, RX, TX, VCC, CTS, GND - Protections: Electronic fuse up to 500mA - Size: 35 x 17 mm Pitch 2,54mm - Connection: Mini USB. Driver: W98 / W2000 / W2003 / W2008 / WinXP / WinVista / W7 / W8 / Linux / Mac Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards: User manual for remote control + 4-channel receiver 315 MHz IC2262 - Wire the USB /> Code C0007 Available Price €3.95
Nokia Graphic LCD 84x48 5110 3310 SPI White The display is compatible with the PCD8544 controller. Ideal for projects with ARDUINO. You can use it with PIC, AVR, STM32 . Characteristic: - LCD screen, 48x84 pixels - Vcc supply 2.7-3.3V - Voltage LED backlight 2.7-3.2V - Compatible PCD8544 controller - SPI interface - PCB dimensions (mm): 45x45 - Includes solder pins - The screen may have small stripes Code P0003 Available Price €2.95
FTDI FT232RL USB-UART Converter - Mini USB FTDI FT232RL USB-UART Converter - Mini USB features: - Serial Converter USB-TTL 3.3V - 5V - LED indicator of Tx, Rx, power. - Communication: TTL COM Virtual RS232 RX / TX Transceiver - Voltage: 3.3V or 5V - per bridge - Pins: DTR, RX, TX, VCC, CTS, GND - Protections: Electronic fuse up to 500mA. - Size: 46 x 19 mm. Step 2.54mm. - Connection: Mini USB - Driver: Windows 7 / 8/10 Linux / Mac / Android - USB TO UART solution with mini USB connector - FT232RL original on board - Compatible with Mac, Linux, Android, WinCE, Windows 7/8 / 8.1 / 10 ... - 3 power mode: 5V output, 3.3V output or powered by the destination board (3.3V-5V) - 3 LEDs: TXD LED, RXD LED, POWER LED - Functional pins Code C0014 Available Price €12.95
LCD Display Screen Blue 1602 + Adapter Board Module IIC/I2C - It consists of a display of 16 characters and 2 rows- The display is compatible with the HD44780 controller- Ideal for projects with ARDUINO- You can use it with PIC, AVR, STM32 PCF8574 -> the default address 0x20PCF8574A -> the default address 0x3F- It can be changed to any between 0x20 and 0x27 depending on whether you have soldiers or not pins A0 A1 A2 Screen LCD Display Screen Blue 1602 + Adapter Board Module IIC/I2C features: - LCD screen, 16 characters and 2 lines- 5V power- HD44780 compatible controller- Backlit blue background, white letters- Include an adjustable contrast pin- Dimensions (mm): 80 x 36 x 12 Adapter LCD Display Screen Blue 1602 + Adapter Board Module IIC/I2C features: Code KT002 Available Regular price €4.04 --€0.80 Price €4.84
Optical Isolated Converter FT232RL USB 2.0 to RS485 This converter has an internal DC / DC supply and a total isolation between the USB and the RS485 output and allows to establish a reliable and safe communication.Its FT232RL component has excellent compatibility and a communication rate up to 3M for a maximum distance of 1.2 km. The RS485 output interface uses an optical coupler with high speed for an optical insulation of 1500V and a protection against lightning of 600W: these characteristics allow to protect the computer from the potential damage of static electricity, lightning, over voltages and ground faults. Optical Isolated Converter FT232RL USB 2.0 to RS485 features: - Required systems: WINDOWS CE / 2000 / XP / VISTA / WIN 7 / LINUX / MAC OS- Internal DC /> Code C0015 Backorder Price €25.49
20x4 2004 LCD display PCF8574T I2C Backlit Blue - It consists of a 20-character, 4-row display - The display is compatible with the controller HD44780 and integrates the module so you can use it through the I2C protocol without any problem - Only two pins are needed for communication, SDA and SCL - Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32 PCF8574 - & gt; the default address 0x20 PCF8574A - & gt; the default address 0x3F - It can be changed to any between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2 20x4 2004 LCD display PCF8574T I2C Backlit Blue features: - LCD screen, 20 characters and 4 lines - 5V power supply - HD44780 compatible controller Code P0013 Available Regular price €8.49 -€1.50 Price €6.99
CP2102 USB 2.0 A RS232 Converter UART TTL Serial Ideal for connecting TTL RS232 devices to your PC through the USB port. CP2102 USB 2.0 A RS232 Converter UART TTL Serial features: - Controller CP2102- 5 pins: 3.3v, 5.0v, TxR, RxD, GND- Standard USB type to male and 5 pin TTL connector- 3 Status LEDs: Power, RX and TX- USB 2.0 specification with 12Mbps maximum speed Code C0001 Available Price €3.70
LCD Display Screen Green 20x4 2004 - It consists of a screen of 20 characters and 4 rows- Ideal for projects with ARDUINO- You can use it with PIC, AVR, STM32 LCD Display Screen Green 20x4 2004 features: - LCD screen, 20 characters and 4 lines- 5V power- Retro green background illuminated, black letters Code P0017 Available Price €8.49
USB to A RS232 UART TTL 5V Converter + Cables Ideal for connecting TTL RS232 devices to your PC through the USB port. USB to A RS232 UART TTL 5V Converter + Cables features: - Compatible controller PL2303HX- 5 pins: 3.3v, 5.0v, TXR, RDX, GND- Heat shrinkable insulating cover- LED indicators of data transmission- 2.5A self-recovery protective fuse- Supported OS: WinME, Win2003, Win XP, Vista, Win 7, Linux- Weight: 40 gr. (approx.) Code C0009 Available Price €2.52
RS232 USB to Serial TTL Adapter Module - USB to Serial PL2303HX PL2303 Ideal to connect TTL RS232 devices to your PC through the USB port. RS232 USB to Serial TTL Adapter Module - USB to Serial PL2303HX PL2303 features: > - Compatible PL2303 controller - 5 pins: 3.3V, 5.0V, TxR, RxD, GND - Heat shrinkable insulating cover - Led data transmission indicators - 2.5A self-recovery protector fuse - Supported OS: Win ME, Win2003, Win XP, Vista, Win 7 - Weight: 40 gr. (approx.) Code C0005 Available Price €1.49
TFT LCD Expansion Board Adapter 34pins V3.0 3.2" 4.3" 5.0" Shield Mega 2560 TFT LCD 34pins Expansion Board Adapter 3.2" 4.3" 5.0 Shield Mega 2560 features:- Facilitates connections between the LCD TFT Touch 3V 2.4 ", 2.8", 3.2 "etc. with SD card reader and the Arduino Mega 2560 board- Put the screen on the Shield and you can connect it directly to the Arduino Mega2560.- TFT LCD MFT TFT LCD PCB adapter for Arduino Mega2560 STM32- The TFT01 LCD operates at 3.3V and can not be used directly on the standard Arduino motherboard at the top.- The TFT LCD PCB adapter for Mega is compatible with the Arduino pins, the user can directly connect the TFT LCD PCB - Adapter on the shield and stand on the Arduino board. It can be used with a Mega2560 and LCD screen. Code P0006 Available Price €7.90
CP2102 USB 2.0 to RS232 RS485 TTL 3.3V 5V converter CP2102 USB 2.0 to RS232 RS485 TTL 3.3V 5V converter features: - Ideal for connecting TTL RS232 RS485 devices to your PC through the USB port Code C0011 Available Price €7.95
Keyboard Shield 16x2 LCD screen for Arduino It is made up of a 16-character, 2-row, 6-button display. The display is compatible with the HD44780 controller and is connected in 4-bit mode so it can be used directly through the Arduino LiquidCrystal library. Ideal to navigate through the different parts of the configuration or map. Keyboard Shield 16x2 LCD screen for Arduino features: > - 2x16 LCD with blue backlight and white characters - Potentiometer to modify the LCD contrast - 5-push-button keyboard + RESET - Use of the minimum possible channels - Full compatibility with Arduino UNO and Mega - The display is compatible with the HD44780 controller - Response time: 30 ms - Size: 80 x 60 x 22 mm Code P0020 Available Price €4.49
USB to RS485 USB to 485 Max485 Converter Ideal for connecting RS485 devices to your PC through the USB port. USB to RS485 USB to 485 Max485 Converter features: - CH340 controller- Supported OS: Win XP, Vista, Win 7.8, OS, Linux- Work with Modbus, Profibus- USB 2.0 specification with 6Mbps of maximum speed- Measures: 60x 18x 14 mm Code C0003 Available Price €2.69
Mini RS232 to TTL Adapter Max3232 Converter Mini RS232 to TTL Adapter Max3232 Converter features: - Converter for RS232 to TTL levels - MAX3232CSE chip - Voltage: 3V a 5V - Speed: no more than 120kbps - Dimensions: 16x9mm Code C0008 Available Price €1.49
IIC/I2C adapter PCF8574 LCD 1602 1604 2004 Interface IIC/I2C adapter PCF8574 LCD 1602 1604 2004 Interface features: - Based on the PCF8574A chip - Power: 5V - Supports I2C Protocol - A potentiometer for regulate contrast - Dimensions: 19x42mm PCF8574 - & gt; the default address 0x20 PCF8574A - & gt; the default address 0x3F - You can change anyone between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2 - With this module the communication between the Arduino and the LCD It is only made through two outputs, SDA and SCL - Up to 8 LCD screens can be connected to the same I2C bus choosing a different address - Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32 Code P0008 Available Price €1.39
Converter Module RS485 a Transceiver TTL 485 Max485 5V PLC Converter Module RS485 a Transceiver TTL 485 Max485 5V PLC features: - Working voltage and TTL levels: 5V- Size: 44 x 14 mm Code C0013 Available Price €1.95
LCD Display Screen Blue Backlight 16x4 1604 It consists of a display of 16 characters and 4 rows.Ideal for projects with Arduino.You can use it with PIC, AVR, STM32. LCD Display Screen Blue Backlight 16x4 1604 features:- LCD screen, 16 characters and 4 lines- 5V power- Backlit blue background, white letters- Include an adjustable contrast pin Code P0009 Available Price €4.80
Screen OLED 0.96" 128x64 White SPI I2C 7 Pin Screen OLED 0.96" 128x64 White SPI I2C 7 Pin features: - Oled 0.96 "screen with 128 * 64 pixels - Drive IC model SDD1306 - Power: 3V-5.5V - Viewing angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption: 0.08W - Operating temperature: -20 to 70 ºC - PCB board dimension: 27 x 27mm - Supports many control chip: 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc. - OLED technology offers high contrast, significantly improves black on screen energy efficiency - very low power consumption Applications: - Due to the size, quality and consumption of smart watch products, portable meters , medical devices, portable players, etc. Code P0026 Available Regular price €5.00 -€1.50 Price €3.50
Module MAX3232 Converter RS232 to TTL Port DB9 female This product is widely used in radio modifications, cell phone flash, xbox360 flash detection, GPS, car, Flash, HDD repair, top box upgrade.It can be used to download MCU types. Module MAX3232 Converter RS232 to TTL Port DB9 female features: - Input voltage: 3.3 - 5 VDC- Multi-channel RS232 controller / receiver MAX3232- Transmission / reception speed up to 250 kbit / s- DB9 serial port- Interface with four pins: - TX: transmission signal - RX: reception signal - VCC: Supply voltage - GND: connects the power cathode- Operating temperature: -65 ° C - + 150 ° C- UART communication- Includes a 4-wire female / female connector for easy connection with the arduino Code C0016 Available Price €2.90
USBASP Atmega8 AVR Programmer Atmega128 Arduino compatible Adapter Cable Characteristic: - AVR 5V / 3.3V microcontrollers - change the programming voltage through jumper JP1 - LED status indicators - Transmission speed: 5kB / s - Fuse protector against possible damage to the USB port - Supported OS: Win ME, Win XP, Vista, Win 7, Win8, Linux - Works with Bascom, Eclipse, WINAVR, avrDUDE, ARDUINO IDE, ATMEL STUDIO The programmer is compatible with most AVR Atmel processors: - MEGA series 8,16,32,64,218 € ¦ - Tiny series: ATtiny10, ATtiny11, ATtiny12, ATtiny13, ATtiny13A, ATtiny15 € ¦ - CAN series: AT90CAN32, AT90CAN64, AT90CAN128 € ¦ - AT90S2313 series, AT90S2323, AT90S2343, AT90S4414, AT90S4433 € ¦ Code B0029 Available Price €6.59
LCD TFT Shield Adapter 2.4" Touch 3V Expansion Board R3 LCD TFT Shield Adapter 2.4" Touch 3V Expansion Board R3 features:- Shield LCD TFT 2.4 "Touch 3V expansion board for Uno R3- Facilitates connections between the TFT LCD 2.4 "Touch 3V with SD card reader and the Arduino UNO board- Put the screen on the shield and you can connect it directly to the Arduino UNO- UNO R3 2.4 "TFT LCD shield TFT LCD PCB Adapter for Arduino UNO STM32- The TFT01 LCD screen operates at 3.3V and can not be used directly on the standard Arduino motherboard at the top- The TFT LCD PCB adapter for UNO is compatible with the Arduino pins, the user can plug directly the TFT LCD PCB adapter into the shield and placed on the Arduino board. - Can be used with a UNO and LCD screen Code P0004 Available Price €6.90
16x2 1602 LCD display HD44780 Backlit Blue background It consists of a 16-character, 2-row display. The display is compatible with the HD44780 controller. Ideal for projects with ARDUINO. You can use it with PIC, AVR, STM32. 16x2 1602 LCD display HD44780 Backlit Blue background features: - LCD screen , 16 characters and 2 lines - 5V power supply - HD44780 compatible controller - Backlit blue background, white letters - Include an adjustable contrast pin - Dimensions (mm): 80 x 36 x 12 Code P0014 Available Regular price €2.65 -€0.75 Price €1.90
USBASP AVR ATmega8 ATmega128 Programmer Kanda Adapter Cable With KANDA adapter it is ideal for projects with ARDUINO. Characteristic: - AVR 5V / 3.3V microcontrollers - programming voltage change through jumper JP1 - Status LED indicators - Transmission speed: 5kB / s - Protective fuse of possible damage to the USB port - Supported OS: Win ME, Win XP, Vista, Win 7, Win8, Linux - Works with Bascom, Eclipse, WINAVR, avrDUDE, ARDUINO IDE, ATMEL STUDIO The programmer is compatible with most AVR Atmel processors: - MEGA series 8,16,32,64,218 € ¦ - Tiny series: ATtiny10, ATtiny11, ATtiny12, ATtiny13, ATtiny13A, ATtiny € 15 ¦ - CAN series: AT90CAN32, AT90CAN64, AT90CAN128 € ¦ - AT90S2313 series, AT90S2323, AT90S144, AT90S1434 ¦ Code B0021 Available Price €5.19
LCD Display Screen 12864 128x64 Dots Graphic Blue Backlight Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32. LCD Display Screen 12864 128x64 Dots Graphic Blue Backlight features:- Graphic LCD Screen 128x64 points- 5V power- Blue retro background illuminated, white letters- Controller ST7920- Parallel / serial communication- Dimensions PCB 93x70mm Code P0015 Available Price €9.95
PL2303HX PL2303 USB to UART TTL Cable Module RS232 Converter 4 Pin Ideal for connecting TTL RS232 devices to your PC through the USB port. PL2303HX PL2303 USB to UART TTL Cable Module RS232 Converter 4 Pin features: - Compatible controller PL2303HXA- 4 pins: 5.0V (red), TxR (green), RxD (white), GND (black)- 2.5A self-recovery protective fuse- Supported OS: Win8, Win10, WinME, Win2003, Win XP, Vista, Win 7 The 64-bit Prolific drivers provided by Microsoft through Windows Update will not work with most adapters and will therefore generate the generic "Code 10" error. Code C0002 Available Price €2.79
Screen OLED 1.3" B Blue 128x64 SPI/I2C Screen OLED 1.3" B Blue 128x64 SPI/I2C features: - Oled 1.3 "128 * 64 pixel display - Drive IC model SH1106 - Power: 3V-5.5V - Viewing angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Use temperature: -20 to 70 ºC - PCB board dimensions: 40 x 37mm OLED technology offers high contrast, significantly improves screen black and energy efficiency - very low power consumption. Applications: - Due to the size, quality and consumption of smart watch products, portable meters, medical devices, portable players, etc. Code P0022 Available Price €8.49
USB 2.0 A Serial Port Cable Adapter DB9 RS232 Series An RS232 serial port to your PC through the USB port USB 2.0 A Serial Port Cable Adapter DB9 RS232 Series features: - CH341 driver- Supported OS: WinME, Win2003, Win XP, Vista, Win 7, Linux, MAC OS9.0/OSX- High quality, shielded cable- Power and data in the same cable, does not require more adapters- Compatible USB interface 1.1 and 2.0- Support up to 1 mega data transfer- Length 73cm The adapter allows you to connect a computer with: - Electric meters- Decoders, programmers- Cash registers- Satellite TV- Control panels- Mobile phones- Diagnostic interfaces for cars- The administration of Cisco routers Code C0010 Available Price €3.29
Screen OLED 1.3" A Blue 128x64 SPI/I2C Screen OLED 1.3" A Blue 128x64 SPI/I2C features: - Oled 1.3 "128 * 64 pixel screen - Drive IC model SH1106 - Power: 3V-5.5V - Viewing angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Use temperature: -20 to 70 ºC - PCB board dimensions: 40 x 37mm OLED technology offers high contrast, significantly improves black on screen and energy efficiency - very low power consumption Code P0023 ✗ Out-of-Stock Price €8.49
Logic Level Converter 3.3 / 5V I2C IIC 3.3V/5V I2C logic level converter module with soldering pins.Ideal to connect a device that works at 3.3V to one that works with 5V.It works with digital signals (high and low levels).Logic Level Converter 3.3 / 5V I2C IIC features:- Voltage: 3.3V/5V- Measures: 1.5x 1 cm Code C0004 Available Price €1.69
Multiplexer 16 Channels CD74HC4067 MUX/DEMUX A multiplexer of this type actually only acts as a switch 16 to a 1.The 4 digital pins are used to set high or low, (binary Y0-Y15) to determine which input pin is connected to pin "Z".The control input S0-S3 is set to low "logic level 0", the signal C0 is connected to the output Z. Multiplexer 16 Channels CD74HC4067 MUX/DEMUX features: - Based on chip CD74HC4067- Analog signal input: Y0-Y15, 16 channels- Analog signal output: Z pin- Digital input, channel control: S0-S3- Module size: approx. 4 x 1.8cm- Package includes:* 1 x CD74HC4067 MUX connection module* 2 x row of soldering pins Code C0006 Available Price €3.49
Screen OLED 0.96" A 128x64 Yellow-Blue SPI/I2C Screen OLED 0.96" A 128x64 Yellow-Blue SPI/I2C features: - Oled 0.96 "Display of 128 * 64 pixels - one yellow line and 3 blue lines - Drive IC model SDD1306 - Power supply: 3V-5.5V - View angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Temperature usage: -20 to 70 ºC - PCB board dimension: 32 x 32 mm - OLED technology offers high contrast, significantly improves black on the screen and energy efficiency - very low consumption energy. Applications: - Due to the size, quality and consumption of smart watch products, portable meters, medical devices, portable players, etc. Code P0024 ✗ Out-of-Stock Price €7.79
Screen OLED 0.96" B 128x64 Yellow-Blue SPI/I2C Screen OLED 0.96" B 128x64 Yellow-Blue SPI/I2C features: - Oled 0.96 "128 * 64 pixel display - One yellow line and 3 blue lines - Drive IC model SDD1306 - Power supply: 3V-5.5V - View angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Temperature usage: -20 to 70 ºC - PCB board dimension: 32 x 32 mm - OLED technology offers high contrast, significantly improves black on the screen and energy efficiency - very low consumption of energy. Code P0025 Available Price €7.79
TTL Converter Module 5V - 3.3V Bidirectional I2C Logic Level Connecting a 3.3V device to a 5V system is a challenge.The bidirectional logic level converter is a small device that safely drops the signals from 5V to 3.3V and increases 3.3V to 5V at the same time.This level converter also works with 2.8V and 1.8V devices. What really separates this logic level converter from our previous versions is that it can successfully set its high and low voltages and go up and down between them safely on the same channel.Each level converter has the ability to convert 4 pins on the high side to 4 pins on the low side with two inputs and two outputs provided for each side. The level converter is very easy to use. The board needs to be powered from the two sources of voltage (high voltage and low voltage) that your system is using. Code M0153 Available Regular price €4.99 -€2.00 Price €2.99
LED 10-Segment Bar Graphics Display Red LED 10-Segment Bar Graphics Display Red features: - Bargraph LED display - Number of segments: 10 - Size: 5mm - Dimensions: 25x10mm - Material GaAsP / GaP - Color: red - Wavelength: 635 nm - Vf / forward /2.1 V - I fw / forward / 30 mA - Iv / Ifw = 20mA / 4 mcd - Number of terminals: 20 Code P0100 ✗ Out-of-Stock Price €1.13
TTL Converter Module 5V - 3.3V Bidirectional 2 Channel I2C Logic Level This bidirectional logic level converter can be used with normal series, I2C, SPI and other digital signals. It does not work with an analog signal.It is very easy to use. The card must be powered from the two voltages (high and low voltage) used by the system.A high voltage (5 V for example) to the pin "HV", low voltage (3.3 V for example) in "LV", and the system ground to pin "GND". TTL Converter Module 5V - 3.3V Bidirectional 2 Channel I2C Logic Level features: - 2 high voltage channels and low voltage logic logic for bidirectional translation- 2 low voltage channels High voltage high voltage logic in unidirectional conversion- The board module is compatible, it can be inserted directly in the use test panel- HV to 5 V power Code M0154 Available Regular price €4.59 -€1.60 Price €2.99
16x2 LCD screen 1602 HD44780 Green background It consists of a 16-character, 2-row display. The display is compatible with the HD44780 controller. Ideal for projects with ARDUINO. You can use it with PIC, AVR, STM32. Characteristic: - LCD screen, 16 characters and 2 lines - 5V power supply - HD44780 compatible controller - Backlit blue background, black letters - Include an adjustable contrast pin - Dimensions (mm): 80 x 36 x 12 Code PV014 Available Regular price €3.29 -€0.50 Price €2.79
TTL Level Converter 5V - 3.3V IO LJ245A TTL level conversion module 5V 3.3V IO Single Interchange Compatible I2C SPI.Use of high-speed dual-level IT supply level translator chip design. TTL Level Converter 5V - 3.3V IO LJ245A features: - Main chip: Octal bus transceiver and change from 3.3-V to 5-V with outputs of 3 states LJ245A of Texas Instrument- VCCA power supply voltage: 4.5 - 5.5 VDC- VCCB power supply voltage: 2.7 - 3.6 VDC- Low level input voltage V (IL): 0.8 V- High-level input voltage V (IH): 2 V- Low level output current I (OL): 12 - 24 mA- High level output current I (OH): -24 - -12 mA- 8 channels allow the conversion of the IO communication level- Channel levels A and B are controlled by VCCA and VCCB Code C0017 Available Price €3.95
1.44 inch TFT LCD screen 128x128 SPI 1.44 inch TFT LCD screen 128x128 SPI features: - TFT LCD screen 128x128 pixels - 4-wire SPI interface (A0, SDA, SCK, CS) - Size: 1.44 inches - Interface: SPI - Resolution: 128 * 128 - Visual area: 1: 1 square - Color screen TFT, the effect is much better than other small CSTN displays - Disk drive: ST7735 - Fully compatible and alternative 5110 interface - Onboard LDO, 5V / 3.3 input voltage support V - Screen dimensions: 30 x 28 mm - PCB dimensions: 45 x 32 mm Code P0048 Available Price €6.99
Analogue to Digital Converter PCF8591T The PCF8591 is a low-power 8-bit single-chip, single-chip, 8-bit data acquisition device with four analog inputs, an analog output, and an I2C serial bus interface.Three address legs A0, A1 and A2 are used to program the hardware address, allowing the use of up to eight devices connected to the I2C bus without additional hardware.Address, control and data to and from the device are transferred in series through the two-way bidirectional I2C bus. Analogue to Digital Converter PCF8591T features: - Main chip: PCF85911- Operating voltage supply: 2.5 - 6 V- Low standby current- Serial input / output through the I2C bus- 3 hardware address pins A0, A1, A2- Sampling speed given by the I2C bus speed Code C0018 Available Price €2.35
6-pin/10-pin Kanda DIL adapter 6-pin/10-pin Kanda DIL adapter features: - Connector for Usbasp Programmer AVR Atmega8 Atmega128 Code B0051 Available Price €1.29
LCD TFT Touch Screen Display 3.2 inch 320x240 LCD TFT Touch Screen Display 3.2inch 320x240, shield 34 pins. Code P0107 Available Regular price €17.90 -€1.41 Price €16.49
Adapter module CH340G LC Technology -TTL UART 5V series This is a CH340G TTL UART 5V serial adapter, designed to allow adding a USB connection to your project. In addition, this opens up the possibility of programming microcontrollers like the Arduino Pro mini. This module allows you to connect your project, from programming small microcontrollers to a custom computer keyboard. The module is ready for use of a UART connection. This may require the installation of a driver; however, it is a standard driver distributed by Microsoft Windows Update, available in Linux and that can be configured in MAC OS. Adapter module CH340G LC Technology -TTL UART 5V series features: - Manufacturer: LC Technology, - Communication chipset: CH340G - Communication: UART, - Pin connection: Code M0186 Available Regular price €2.50 -€0.51 Price €1.99
Pantalla LCD TFT 2.4 pulgadas 240x320 SPI - Pantalla LCD TFT 240x320 pixels- 262.000 posibles colores (18 bit)- Pixel: RGB vertical stripe- Controlador ILI9341 - Interface SPI - 8 bit interfaz digital, 4 bit líneas de control- Pantalla táctil resistiva 4 - wires- Ideal para proyectos con ARDUINO, Uno R3, MEGA2560 Enlaces útiles : Cableado de la pantalla LCD TFT 2.4 SPI - Conectar la pantalla LCD TFT 2.4 SPI con el módulo UNO Visualizar gráficos y textos en la pantalla LCD TFT 2.4 SPI Programar una calculadora táctil en la pantalla LCD TFT 2.4 SPI Code P0110 Available Regular price €9.60 -€1.00 Price €8.60
Adapter / Converter HDMI male - VGA female + Audio Jack cable Descripción: El adaptador de HDMI a VGA le permite conectar un monitor, proyector o LCD analógico estándar que usa un conector o cable VGA a un cuaderno, DVD, TVbox, reproductor BIU-rog, computadora, proyector. Característica: - Tipo: adaptador/convertidor AV,- Conector A: HDMI macho,- Conector B: VGA hembra,- Conexión Split / Duplicación: ninguna (1: 1),- El adaptador dispone de una entrada audio Jack hembra,- Ancho del cable del adaptador: 15cm,- Incluye un cable audio Jack macho de ambos lados,- Ancho del cable audio: 52cm,- Color: blanco. Code C0019 Available Price €7.50
Screen OLED 0.96" 128x64 Blue I2C It is a monochrome OLED display module with a 128x64 resolution dot matrix and an IC2 interface. Compared to the LCD, OLED displays are Much more competitive, they have a number of advantages such as high brightness, self-emission, high contrast ratio, wide viewing angle, wide temperature range, and low power consumption. Screen OLED 0.96" 128x64 Blue I2C features: - Interface: I2C (logical level 3.3V) - Resolution: 128 x 64 - Angle of view: & gt; 160 degree - Screen color: blue - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 - 70 - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " Code P0096 Last items in stock Regular price €7.50 -€1.51 Price €5.99
LED Display 1-Digit 7-Segment Red Common Anode This product is a 1 digit screen composed of 7 red LED segments with excellent brightness and features:.It works with very low current consumption.The segments of this screen are connected with a common anode point.LED Display 1-Digit 7-Segment Red Common Anode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 10- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Digit numbers: 1- Segment numbers by digit: 7- Operating temperature: -25°C - + 85°C Code P0117 Available Price €0.85
Adaptador DIP para USBASP Programador AVR Atmega8 Atmega128 Standard ISP download port, for on-line programming. Built-in crystal oscillator circuit (8MHz), crystal are replaceable. Has reset push button, power reset push button. Code B0073 Available Price €3.92
LED Display 1-Digit 7-Segment Red Common Cathode LED Display 1-Digit 7-Segment Red Common Cathode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 10- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Number of digits: 1- Segment numbers by digit: 7- Operating temperature: -25 ° C - + 85 ° C- Storage temperature: -30 ° C - + 85 ° C- Screen with common cathode connection- Screen size: 12.6x19x8 mm- This product is a 1 digit screen composed of 7 red LED segments with excellent brightness and features:. Code P0118 Available Price €0.85
Converter Module AD-DA PCF8591 - Analog Voltage 2.5V-6V This module equipped with a PCF8591 converter has a low current power supply and includes 8 bit CMOS data acquisition devices.Your converter has four analog inputs, one analog output and one I2C serial bus interface.It is supplied in the voltage range 2.5V-6V, analog voltage between the negative potential VSS and positive VDD. The control and data signals are transmitted on the two-wire I2C bi-directional bus to the transformed series.The intensity of the ambient light can be converted into a digital signal thanks to its integrated photoresistor.It allows access to eight PCF8591 converters on the same I2C bus without additional equipment. Converter Module AD-DA PCF8591 - Analog Voltage 2.5V-6V features: - Supply voltage (between VSS and VDD): 2.5-6VDC Code M0133 Available Price €2.89
LED Display 2-Digit 7-Segment Red Common Anode LED Display 2-Digit 7-Segment Red Common Anode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 10- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Number of digits: 2- Segment numbers by digit: 7- Operating temperature: -25 ° C - + 85 ° C- Storage temperature: -30 ° C - + 85 ° C- Screen with common anode connection- Screen size: 25x19x8 mm- This product is a 2-digit screen composed of 7 red LED segments with excellent brightness and features:. Code P0119 Available Price €1.49
USB 2.0 to Parallel Adapter Cable DB25 Interface IEEE 1284 Printer A standard IEEE1284 DB25 parallel port to your PC via the USB port. Transmission speed reaches 12 Mbps. This cable is "USB Printing Support" port and not Parallel "LPT Printer Port" Code C0020 Available Price €2.99
LED Display 2-Digit 7-Segment Red Common Cathode LED Display 2-Digit 7-Segment Red Common Cathode features:- Supply voltage of the segments: 3 VDC- LED color of the segments: red- Digit length: 14.2mm- Digit width: 8.1mm- Pin numbers: 10- Diameter of pins: 0.51mm- Step between pins: 2.54mm- Consumption current per segment: 30mA- Maximum admissible current per segment: 70mA- Direct current by segment (pulse operation): 30mA- Number of digits: 2- Segment numbers by digit: 7- Operating temperature: -25°C - + 85°C- Storage temperature: -30°C - + 85°C- Screen with common cathode connection- Screen size: 25x19x8 mm- This product is a 2-digit screen composed of 7 red LED segments with excellent brightness and features:. Code P0120 Available Price €1.49