Thermal Conductive Pad TO220 18x13x0.3mm 1.5W/mK Thermal Conductive Pad TO220 18x13x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 18x13x0,3mm Code Q0077 Available Price €0.50
LED indicator light 18mm 230V Red plastic with cable 20cm Red LED indicator light with 20cm cable for machinery lights Code K0280 Last items in stock Price €0.85
SparkFun WiFi Shield - ESP8266 The SparkFun WiFi ESP8266 Shield is a shield for Arduino R3 R3 board enabling internet connection. ESP8266 as you all know is a solid fundament for any IoT project an in this version it can be simply and easily put on your board. It is a great middle ground between the sole module and the development board such NodeMcu or WeMos. So if you need a relatively cheap and super reliable way to internet for your Arduino project - this is the shield for you! ESP8266 shield WiFi comes with an AT-command firmware, hence can be controlled by any UART. It works great with any Arduino R· layout. The shield doesn´t have the headers on. Code SP006 Last items in stock Price €21.99
Banana Plug Connector 4mm Male Black Banana Plug Connector 4mm Male Black features: - Arduino PCB Robot PCB Test Code K0025 Available Price €0.39
Thermal Conductive Pad TO247 23x18x0.3mm 1.5W/mK Thermal Conductive Pad TO247 23x18x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass.- Dimensions: 23x18x0,3mm Code Q0076 Available Price €0.50
SparkFun Altavoz Hamburger SparkFun Hamburger speaker is a high quality speaker in a small form and with even smaller price. You wouldn't believe you can get a quality product for less than 7€, right? Well, we couldn't believe that as well, but SparkFun makes that possible. Code SP022 ✗ Out-of-Stock Price €7.99
SW-520D Vibration Metal Tilt Sensor Detects changes in the sensor angle and returns to the digital value. 5x SW-520D Vibration Metal Tilt Sensor features: - Contact resistance: Code S0020 Available Price €0.45
2x Electronic Clips Crocodile 2x50mm Black + Red pack 2pcs 2x Electronic Clips Crocodile 2x50mm Black + Red features: - Length: 50mm- Quantity: 2 units Code K0026 Available Price €0.99
Thermal Conductive Pad TO3 41.5x28.2x0.3mm 1.5W/mK Thermal Conductive Pad TO3 41.5x28.2x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 41.5x28.2x0.3mm Code Q0075 ✗ Out-of-Stock Price €0.50
Potentiometer B1K Linear Potentiometer B1K Linear features: -1k OHM kΩ - linear potentiometer 1k Arduino -Tolerance: +/- 20% - Power: 0.125W Code K0065 Available Price €0.99
TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 26x26x0,3mm Code Q0074 Available Price €0.50
Microcontroller ATMEGA328P-PU DIP-28 Microcontroller ATMEGA328P-PU DIP-28 features:- Series: AVR® ATmega- Core Processor: AVR- Package / Case: 28-DIP (0.300 ", 7.62mm)- Core Size: 8-Bit- Speed: 20MHz- Connectivity: I²C, SPI, UART / USART- Peripherals Brown-out: Detect / Reset, POR, PWM, WDT- Number of I/O: 23- Program Memory Size: 32KB (16K x 16)- Program Memory Type: FLASH- EEPROM Size: 1K x 8- RAM Size: 2K x 8- Voltage - Supply (Vcc / Vdd): 1.8 V ~ 5.5 V- Data Converters: A / D 6x10b- Oscillator Type: Internal- Operating Temperature: -40 ° C ~ 85 ° CFManufacturer: SGS-THOMSON / ST- RoHS: Yes- Quantity: 1 unit Code T0008 Available Price €5.95
W5100 Mini Network Module Ethernet Shield Arduino compatible W5100 Mini Network Module Ethernet Shield Arduino features: - Shield Ethernet for Arduino and compatible boards based on the Wiznet W5100 chip - Provides a simple mode to connect your module to the local network and the internet - Compatible with the official Arduino Ethernet library - With this shield you can build a web server - It can be used as a server or as a client - Controller: Wiznet W5100 - Supports TCP and UDP protocols - Supports up to 4 simultaneous connections - Compatible with all versions of Arduino: UNO, mega 1280/2560 - Dimensions: 50 x 25x 25mm Code W0074 Available Price €10.90
Gravity: Analog pH Sensor/Meter Kit V2 DFRobot Gravity: The V2 analogue pH meter is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. The DFRobot ph sensor is commonly used in various applications such as aquaponics, aquaculture and environmental water testing. The pH is a value that measures acidity or alkalinity. Code DF003 Last items in stock Price €57.80
LED Diode Assortment Kit 50x Red Green Yellow Blue White LED Diode Assortment Kit 50x Red Green Yellow Blue White features: - Lens color: Red, green, yellow, blue - diffuse, light white- Size: 5 mm- Operating current: 20mA- Voltage (red) 1.8V-2.3V- Voltage (green) 3.2V-3.4V- Voltage (yellow) 1.8V-2.3V- Voltage (blue) 3.0V-3.2V- Voltage (white) 3.2V - 3.4V- Anode (A): Positive (long leg): 17mm- Cathode (K): Negative (shorter leg): 15 mm- Operating temperature: -25ºC / 80ºC- Welding temperature: + 260ºC- Quantity: - 50 units - 10x red - 10x green - 10x yellow - 10x blue - 10x white Code P0007 Available Price €1.99
3x Heat Sink Aluminium Adhesive A4988 DRV8825 3x Heat Sink Aluminium Adhesive A4988 DRV8825 features: - Package includes: 3x Heatsink with adhesive - Ideal for DRV8825, A4988 etc - Dimensions: 9 x 9 x 5mm Code I0046 Available Price €0.35
GamePad for micro:bit (V4.0) GamePad for micro:bit V4.0 adopts a high-precision three-axis analog quantity joystick. The combination of joystick and gamepad allows you to control the direction and speed of Maqueen at the same time. In addition, there are 7 programmable buttons, which means you can explore more interesting functions and more flexible controls. In the latest V4.0 product, we have placed the external battery box on the PCB, which is more convenient to use. Code DF009 ✗ Out-of-Stock Price €24.95
SONOFF RM433 Remote Controller The Sonoff IFan03 is an intelligent controller for ceiling fans with light that allows us to control it intelligently, either by the eWeLink application, by means of 433MHz RF control or by voice assistants such as Alexa or Google Home. Create your own scenes, turn on the light and/or the fan and adjust its speed, programming it to the hours you want. Code WS037 Available Price €6.99
Potentiometer B10K linear Characteristic: -10k OHM kΩ - linear potentiometer 10k Arduino -Tolerance: +/- 20% - Power: 0.125W Code K0067 Available Price €0.99
Ring:bit 6 IN 1 Pack : Bricks pack - building and coding kit for micro:bit Six cases of fun in one kit: kids can build 6 shapes, including traffic lights, brick car, temperature-controlled fans, smart desk lamp, windscreen wiper and trebuchet. Building with this kit is just as easy as building with Lego. Note: the micro:bit board is not included, you can buy it separately. Code EL0104 Backorder Price €58.90
433MHz RF Wireless Receiver + Transmitter Transmitter and receiver kit for radio control and data transmission, compatible with Arduino. 433MHz RF Wireless Receiver + Transmitter features: Specifications of the emitter module: - Power supply: 3V ~ 12V - Working intensity: max = 40mA (at 12V), min = 9mA (at 3V) - AM ASK / OOK modulation - SAW filter - Working frequency: 315MHz-433.92MHz - Transmission power: 25mW (315MHz at 12V) - Range: 20 to 200 meters (different voltages can give different results) - Transfer speed: 4 kB / S - Dimensions: 19x 19x 7mm Receiver module specifications: - Power supply: 5.0VDC + 0.5V - Work intensity: 5.5mA (at 5.0VDC) - Work frequency: 315MHz-433.92MHz - Receiver sensitivity: -100dBm Code W0010 Available Price €1.09
Potentiometer B5K Linear 5K OHM kΩ Characteristic: - Tolerance: +/- 20% - Power: 0.125W Code K0066 Available Price €0.99
Micro:bit Tinker Kit for micro:bit - Octopus sensors Micro:bit Tinker Kit - Create a variety of octopus sensors thanks to the Tinker kit and the many project tutorials to help you create dozens of amazing digital maker projects. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0106 Last items in stock Regular price €91.90 -€15.00 Price €76.90
LCD TFT Display Screen 2.4 240x320 UNO Mega2560 SD LCD TFT Display Screen 2.4 240x320 UNO Mega2560 SD features:- LCD screen TFT 240x320 pixels- Power 2.8-3.3V- 262,000 possible colors (18 bit)- 8/16 bit parallel bus digital interface- LCD Controller: ILI9325- Touch screen controller: XPT2046- Touchscreen, resistive touch screen- Manual use or with any type of pointer- SD card reader- Connector: 2 x 20 pins 2.54mm- Dimensions PCB 75x55 mm- Dimensions LCD 59x42 mm- Ideal for projects with ARDUINO Uno Mega, AVR, STM Code P0005 Last items in stock Price €9.99
Micro:bit Starter Kit The Microbit Starter kit has provided 24 types of electronic components to help you get started. Micro:bit Starter kit can help your children enter a wonderful electronic world. Note: the micro:bit board is not included, you can buy it separately. Code EL0107 Available Price €35.90
2x Banana Connector Diameter 4mm Red and Black pack 2pcs 2x Banana Connector Diameter 4mm Red and Black features: - Length: 40 mm- Diameter plug: 4mm- Quantity: 2 units Code K0030 Available Price €0.79
RGB LED Strip WS2812B Black 1m 30 LED/M IP65 RGB LED Strip WS2812B Black 1m 30 LED/M IP65 features: - RGB LED WS2812B - WS2812B are LEDs that have integrated logic, making it possible to vary the color of each LED in a way individual - WS2812B includes a built-in inside each LED, which allows each pixel to be accessed individually - For this reason, these types of LEDs are called individually indexable. - They are based on the 5050 LEDs - 30 individually indexable LED diodes - 24-bit color control (8-bit PWM per channel) - 16.8 million colors per LED - Communication One-wire - Power: 5 V - Width: 11 mm - Thickness: 2.6 mm - Length: 1 meter - Consumption: 1.8A (all white) - Waterproof - With 3M adhesive Code P0101 Available Price €9.75
Smart Science IoT Kit : micro:bit climate sensor kit for IoT learning ELECFREAKS Smart Science IoT Kit is developed on the basis of loT:Bit, a new breakout board compatible with ultrasonic sensor, dust sensor, light sensor and water level sensor, including RTC Timing and WIFI module. It can build the scene such as air quality monitoring, environmental noise detection, environmental quality monitoring station, automatic watering detection, self-defence monitoring station and more. Code EL0109 Last items in stock Price €73.90
ELECFREAKS AI Smart Lens Kit The AI Lens for micro:bit is capable of achieving the functions of face recognition, ball tracking, card recognition and feature acquisition. Code EL0110 Backorder Price €59.95
NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Regular price €180.49 -€30.50 Price €149.99
Female DC Power Connector Jack 2.1x5.5mm Jack connectors 2.1mm inside and 5.5mm outside to power devices such as LED strips, CCTV (Cameras), Arduino. Female DC Power Connector Jack 2.1x5.5mm features: - Ideal for connecting without welding- It has two screws in the tip for positive and negative cable screwdriver Code K0050 Available Price €0.49
Construction kit 32 IN 1 micro:bit - Wonder Building kit With this 32 in 1 construction kit you can build all 32 options or develop your imagination by building your own project. Note: the micro:bit board is not included, you can buy it separately. Code EL0112 ✗ Out-of-Stock Regular price €94.95 -€5.00 Price €89.95
Sensor Module FZ0888 IR Infrared Speed Meter Sensor Module FZ0888 IR Infrared Speed Meter features: - The FZ0888 encoder module is a device that can help you in the creation of your robotics and automation project, Whether you want to know the speed of a motor or its exact position - The module has a digital output (DO) which can be connected to your preferred microcontroller. The operating mode: - When the sensor is blocked, the DO output is high - The AO signal is not enabled in this module - Power supply: 3.3-5V - Power consumption current 20 mA max - PCB dimensions: 32 x 14 mm Code S0038 Available Price €1.89
Interactive Coding Accessory Pack The six+ cool projects in this kit will give children new insights into artificial intelligence while they are entertained. Note: the micro:bit board is not included, you can buy it separately. Code EL0113 Last items in stock Price €37.90
Retro Makecode Arcade For Education The RETRO Arcade for Education is the first large-screen arcade device with high resolution. Children can use it to fuel their creativity by easily creating their games while having fun playing. Code EL0114 ✗ Out-of-Stock Price €59.90
2x Cable Female - Female 4 Pins 4 Colors For connecting Arduino modules or boards. Ideal for your electronic projects, arduino, but can also be used with other microcontrollers. 2x Cable Female - Female 4 Pins 4 Colors features: - No soldering required - Circuits can be easily modified or revised - Quantity: 2 cables of 4 pins, female - female connector - Colors: red, black, blue, green - Pin pitch: 2.54mm - Cable lengths: 70cm For one rapid construction of a prototype of an electronic circuit. Code K0090 Available Price €0.99
Smart City Kit micro:bit With the Smart City Kit you will learn more about the IoT, the software, and the possibilities of future city scenes that are able to be built through it. You will be able to build topics such as smart parking, transport network, river level monitoring... Code EL0115 ✗ Out-of-Stock Price €59.80
Female to Female Cable 3 Pins 3 Colors Ideal for your electronic projects, Arduino, but can also be used with other microcontrollers. Code K0091 Available Price €0.95
1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino 1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino features:- Channel: 1 (protected with Optocoupler)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator- Dimensions: 30x 54mm- Has a jumper that allows to choose type of trigger signal (low / high)- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Code RL001 Last items in stock Price €2.39
micro:bit Smart Health Kit With the micro:bit Smart Health Kit you will build items such as UV light detections, sitting posture reminder, alcohol detector, smart bin and more, from which we can learn how to program and how to maintain healthy living habits in a scientific way. Code EL0116 Last items in stock Price €59.90