Pro Micro 5V 16Mhz Arduino Compatible Board It has an ATMega32U4 chip running at 16Mhz with a factory-loaded bootloader. It does not include pins so we can solder only the pins we need. Characteristic: - Microcontroller: ATmega32U4 - Operation: 5V - Power (max): 5-12V - Total I / O pins: 20 - PWM pins: 5 - Analog pins: 12 - Maximum current of I / O pins: 40 mA - Maximum current of pin 3.3V: 50 mA - Flash memory: 32 KB (4 KB used by the bootloader) - SRAM: 2.5 KB - EEPROM: 1 KB - Speed: 16 MHz - external interrupt - TWI / I2C, UART, SPI interfaces - Dimensions: 18x33mm - Weight: 30 grams Code B0022 Available Price €9.49
Shield Li-Po Battery for WeMos D1 Mini ESP826 Shield Li-Po Battery for WeMos D1 Mini ESP826 features: Connect the lithium battery to this shield to supply power for the entire D1 mini system. When the battery is depleted, it is not necessary disconnect the battery, just use the usb port to charge directly. - Charging voltage: max: 10V, recommend: 5V - Charging current: max: 1A - Voltage lithium battery: 3.3-4.2V - Boost power supply: 5V (max: 1 A) - LED color: red for charging, green for fully charged - Ports: * Micro USB - Charging port (normal 5V) * Connect to the lithium battery (normal 3.3-4.2V) * J1 - setting the maximum charging current, 0.5 A or 1A Code W0076 Available Regular price €4.76 -€1.00 Price €3.76
Pro Mini 8MHZ 3.3V Arduino compatible board Miniaturized compatible version of Arduino Pro Mini. It has an Atmega328P chip running at 8Mhz with a factory loaded bootloader. It does not include pins so - we can solder only the pins that we need. Pro Mini 8MHZ 3.3V Arduino compatible board features: - ATmega328P 8MHz chip with external quartz crystal - Auto-reset - micro switch - Integrated 3.3V regulator - FLASH 32kB memory - SRAM 1kB memory - EEPROM 1Kb memory - Analog input A0-A7 - 8 PWM channels - external interruption - TWI / I2C, UART, SPI interfaces - Power and status LEDs - Dimensions: 18x33mm - Weight: 30 grams An adapter is needed to program it Code B0017 Available Regular price €8.95 -€2.00 Price €6.95
MT3608 2A DC Boost Step-Up Adjustable Power Module MicroUSB MT3608 2A DC Boost Step-Up Adjustable Power Module MicroUSB features: - Booster module - The output voltage may be greater than the input voltage - Use a multimeter to check the output voltage and adjust the potentiometer - Input voltage: 2-24V - Output voltage: 5-28V - Current output: 2A - Operating temperature: -40ºC to + 85ºC - Conversion efficiency: up to 93% - Size: 17.5 x 30 mm Code A0065 Available Price €1.69
RS232 USB to Serial TTL Adapter Module - USB to Serial PL2303HX PL2303 Ideal to connect TTL RS232 devices to your PC through the USB port. RS232 USB to Serial TTL Adapter Module - USB to Serial PL2303HX PL2303 features: > - Compatible PL2303 controller - 5 pins: 3.3V, 5.0V, TxR, RxD, GND - Heat shrinkable insulating cover - Led data transmission indicators - 2.5A self-recovery protector fuse - Supported OS: Win ME, Win2003, Win XP, Vista, Win 7 - Weight: 40 gr. (approx.) Code C0005 Available Price €1.49
Battery holder 2x 18650 3,7V Parallel Lithium Battery Instruction: - The drawing of the polarities is not correct, it is wrong - Put the batteries in parallel Characteristic: - Cable 15cm long - Measures 74x42x 20mm - Weight: 10 gr. (Approx.) - Stack length max 67mm Code PP016 Available Price €1.85
Resistor 2,2K Ohm 5% 0,25W 1/4W Resistor 2,2K Ohm 5% 0,25W 1/4W features:-2.2K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0015 Available Price €0.08
NE555P DIP8 Precision Timer Integrated Circuit NE555P DIP8 Precision Timer Integrated Circuit features: - Blister: DIP8- Number of pins: 8- Step between pins: 2.54 mm- Manufacturer: Texas Instrument - Input voltage VCC: 4.5 - 16 VDC- THRES voltage level: 2.4 - 11.2 VDC- TRIG voltage level: 1.1 - 5.6 VDC- RESET voltage level: 0.3 - 1 VDC- DISCH voltage level change out of state: 0.15 - 0.4 nA- CONT voltage (open circuit): 2.6 - 11 VDC- Low level output voltage: 0.1 - 0.4 V- High level output voltage: 2.75 - 13.3 V - Output current I (O): ± 200 mA- THRES current: 30 - 250 nA- TRIG current: 0.5 - 2 μA- RESET current: -0.4 - 0.4 μA- Current change DISCH out of state: 20 - 100 nA Code T0061 Available Price €0.79
Screen OLED 1.3" B Blue 128x64 SPI/I2C Screen OLED 1.3" B Blue 128x64 SPI/I2C features: - Oled 1.3 "128 * 64 pixel display - Drive IC model SH1106 - Power: 3V-5.5V - Viewing angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Use temperature: -20 to 70 ºC - PCB board dimensions: 40 x 37mm OLED technology offers high contrast, significantly improves screen black and energy efficiency - very low power consumption. Applications: - Due to the size, quality and consumption of smart watch products, portable meters, medical devices, portable players, etc. Code P0022 Available Price €8.49
Screen OLED 0.96" B 128x64 Yellow-Blue SPI/I2C Screen OLED 0.96" B 128x64 Yellow-Blue SPI/I2C features: - Oled 0.96 "128 * 64 pixel display - One yellow line and 3 blue lines - Drive IC model SDD1306 - Power supply: 3V-5.5V - View angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Temperature usage: -20 to 70 ºC - PCB board dimension: 32 x 32 mm - OLED technology offers high contrast, significantly improves black on the screen and energy efficiency - very low consumption of energy. Code P0025 Available Price €7.79
Screen OLED 0.96" A 128x64 Yellow-Blue SPI/I2C Screen OLED 0.96" A 128x64 Yellow-Blue SPI/I2C features: - Oled 0.96 "Display of 128 * 64 pixels - one yellow line and 3 blue lines - Drive IC model SDD1306 - Power supply: 3V-5.5V - View angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Temperature usage: -20 to 70 ºC - PCB board dimension: 32 x 32 mm - OLED technology offers high contrast, significantly improves black on the screen and energy efficiency - very low consumption energy. Applications: - Due to the size, quality and consumption of smart watch products, portable meters, medical devices, portable players, etc. Code P0024 ✗ Out-of-Stock Price €7.79
Display OLED 0.96" 128x64 White I2C 4 Pin Display OLED 0.96" 128x64 White I2C 4 Pin features: - Interface: I2C (logical level 3.3V) - Resolution: 128x64 - Angle of view:> 160 degree - Screen color: white - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 ° C - 70 ° C - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " - Application: smart watch, MP3, thermometer , instruments, DIY projects, etc ... - It is an OLED display module with white display and with a dot matrix of a resolution 128x64 and an IC2 interface. - The display includes the IC driver SSD1306 128 x 64 OLED / PLED Segment / Common Driver. Code P0091 ✗ Out-of-Stock Regular price €6.50 -€2.51 Price €3.99
Screen OLED 0.96" 128x64 Blue I2C It is a monochrome OLED display module with a 128x64 resolution dot matrix and an IC2 interface. Compared to the LCD, OLED displays are Much more competitive, they have a number of advantages such as high brightness, self-emission, high contrast ratio, wide viewing angle, wide temperature range, and low power consumption. Screen OLED 0.96" 128x64 Blue I2C features: - Interface: I2C (logical level 3.3V) - Resolution: 128 x 64 - Angle of view: & gt; 160 degree - Screen color: blue - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 - 70 - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " Code P0096 Last items in stock Regular price €7.50 -€1.51 Price €5.99
0.96" 128x64 Blue-Yellow I2C 4-Pin OLED display 0.96" 128x64 Blue-Yellow I2C 4-Pin OLED display features: - Interface: I2C (logical level 3.3V) - Resolution: 128x64 - Angle of view:> 160 degrees - Screen color: blue and yellow (1/4 above yellow and 3/4 below blue) - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 ° C - 70 ° C - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " - Application: smart watch, MP3, thermometer, instruments, DIY projects, etc ... - It is an OLED screen module with blue-yellow display and with a resolution dot matrix 128x64 and an IC2 interface. - The display includes the driver controller SSD1306 128 x 64 Segment Driver / OLED / PLED Common. Code P0134 Available Regular price €7.50 -€1.00 Price €6.50
Display OLED 0.96" 128x64 White with ZIF FPC connector Display OLED 0.96" 128x64 White with ZIF FPC connector features: - Oled 0.96 "screen with 128 * 64 pixels - Drive IC model SDD1306 - Power: 3.3V - Angle of view: 160 degrees - Interface 3-wire SPI, 4-wire SPI, I2C, parallel - Low consumption: 0.08W - Use temperature: -30 to 85 ºC - 30-pin connector - Display Mode: passive matrix - Display Color: monochrome (white) - Panel size: 26.70 * 19.26 * 1.4mm - Active area: 21,744 * 10,864mm - Pitch size: 0.17 * 0.17mm - Pixel size: 0.154 * 0.154mm - Supports many control chip: 51 Series, MSP430 Series, STM32 /> Code P0153 Backorder Price €4.85
Screen OLED 1.3" A Blue 128x64 SPI/I2C Screen OLED 1.3" A Blue 128x64 SPI/I2C features: - Oled 1.3 "128 * 64 pixel screen - Drive IC model SH1106 - Power: 3V-5.5V - Viewing angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Use temperature: -20 to 70 ºC - PCB board dimensions: 40 x 37mm OLED technology offers high contrast, significantly improves black on screen and energy efficiency - very low power consumption Code P0023 ✗ Out-of-Stock Price €8.49
Screen OLED 1.3" B Blue 128x64 SPI/I2C Screen OLED 1.3" B Blue 128x64 SPI/I2C features: - Oled 1.3 "128 * 64 pixel display - Drive IC model SH1106 - Power: 3V-5.5V - Viewing angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Use temperature: -20 to 70 ºC - PCB board dimensions: 40 x 37mm OLED technology offers high contrast, significantly improves screen black and energy efficiency - very low power consumption. Applications: - Due to the size, quality and consumption of smart watch products, portable meters, medical devices, portable players, etc. Code P0022 Available Price €8.49
Screen OLED 0.96" B 128x64 Yellow-Blue SPI/I2C Screen OLED 0.96" B 128x64 Yellow-Blue SPI/I2C features: - Oled 0.96 "128 * 64 pixel display - One yellow line and 3 blue lines - Drive IC model SDD1306 - Power supply: 3V-5.5V - View angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Temperature usage: -20 to 70 ºC - PCB board dimension: 32 x 32 mm - OLED technology offers high contrast, significantly improves black on the screen and energy efficiency - very low consumption of energy. Code P0025 Available Price €7.79
Screen OLED 0.96" A 128x64 Yellow-Blue SPI/I2C Screen OLED 0.96" A 128x64 Yellow-Blue SPI/I2C features: - Oled 0.96 "Display of 128 * 64 pixels - one yellow line and 3 blue lines - Drive IC model SDD1306 - Power supply: 3V-5.5V - View angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Temperature usage: -20 to 70 ºC - PCB board dimension: 32 x 32 mm - OLED technology offers high contrast, significantly improves black on the screen and energy efficiency - very low consumption energy. Applications: - Due to the size, quality and consumption of smart watch products, portable meters, medical devices, portable players, etc. Code P0024 ✗ Out-of-Stock Price €7.79
Display OLED 0.96" 128x64 White I2C 4 Pin Display OLED 0.96" 128x64 White I2C 4 Pin features: - Interface: I2C (logical level 3.3V) - Resolution: 128x64 - Angle of view:> 160 degree - Screen color: white - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 ° C - 70 ° C - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " - Application: smart watch, MP3, thermometer , instruments, DIY projects, etc ... - It is an OLED display module with white display and with a dot matrix of a resolution 128x64 and an IC2 interface. - The display includes the IC driver SSD1306 128 x 64 OLED / PLED Segment / Common Driver. Code P0091 ✗ Out-of-Stock Regular price €6.50 -€2.51 Price €3.99
Screen OLED 0.96" 128x64 Blue I2C It is a monochrome OLED display module with a 128x64 resolution dot matrix and an IC2 interface. Compared to the LCD, OLED displays are Much more competitive, they have a number of advantages such as high brightness, self-emission, high contrast ratio, wide viewing angle, wide temperature range, and low power consumption. Screen OLED 0.96" 128x64 Blue I2C features: - Interface: I2C (logical level 3.3V) - Resolution: 128 x 64 - Angle of view: & gt; 160 degree - Screen color: blue - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 - 70 - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " Code P0096 Last items in stock Regular price €7.50 -€1.51 Price €5.99
0.96" 128x64 Blue-Yellow I2C 4-Pin OLED display 0.96" 128x64 Blue-Yellow I2C 4-Pin OLED display features: - Interface: I2C (logical level 3.3V) - Resolution: 128x64 - Angle of view:> 160 degrees - Screen color: blue and yellow (1/4 above yellow and 3/4 below blue) - Screen Dimension: 2.43cm / 0.96 " - IC Controller: SSD1306 - Power supply: 3.3V - 5VDC - Operating temperature: -20 ° C - 70 ° C - Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 " - Application: smart watch, MP3, thermometer, instruments, DIY projects, etc ... - It is an OLED screen module with blue-yellow display and with a resolution dot matrix 128x64 and an IC2 interface. - The display includes the driver controller SSD1306 128 x 64 Segment Driver / OLED / PLED Common. Code P0134 Available Regular price €7.50 -€1.00 Price €6.50
Display OLED 0.96" 128x64 White with ZIF FPC connector Display OLED 0.96" 128x64 White with ZIF FPC connector features: - Oled 0.96 "screen with 128 * 64 pixels - Drive IC model SDD1306 - Power: 3.3V - Angle of view: 160 degrees - Interface 3-wire SPI, 4-wire SPI, I2C, parallel - Low consumption: 0.08W - Use temperature: -30 to 85 ºC - 30-pin connector - Display Mode: passive matrix - Display Color: monochrome (white) - Panel size: 26.70 * 19.26 * 1.4mm - Active area: 21,744 * 10,864mm - Pitch size: 0.17 * 0.17mm - Pixel size: 0.154 * 0.154mm - Supports many control chip: 51 Series, MSP430 Series, STM32 /> Code P0153 Backorder Price €4.85
Screen OLED 1.3" A Blue 128x64 SPI/I2C Screen OLED 1.3" A Blue 128x64 SPI/I2C features: - Oled 1.3 "128 * 64 pixel screen - Drive IC model SH1106 - Power: 3V-5.5V - Viewing angle: 160 degrees - SPI interface (I2C can be changed) - Low consumption 0.08W - Use temperature: -20 to 70 ºC - PCB board dimensions: 40 x 37mm OLED technology offers high contrast, significantly improves black on screen and energy efficiency - very low power consumption Code P0023 ✗ Out-of-Stock Price €8.49