Screen OLED 0.96" 128x64 Blue I2C
  • Screen OLED 0.96" 128x64 Blue I2C
  • Screen OLED 0.96" 128x64 Blue I2C
  • Screen OLED 0.96" 128x64 Blue I2C

Screen OLED 0.96" 128x64 Blue I2C

P0096

It is a monochrome OLED display module with a 128x64 resolution dot matrix and an IC2 interface. Compared to the LCD, OLED displays are Much more competitive, they have a number of advantages such as high brightness, self-emission, high contrast ratio, wide viewing angle, wide temperature range, and low power consumption. Screen OLED 0.96" 128x64 Blue I2C features:
- Interface: I2C (logical level 3.3V)
- Resolution: 128 x 64
- Angle of view: & gt; 160 degree
- Screen color: blue
- Screen Dimension: 2.43cm / 0.96 "
- IC Controller: SSD1306
- Power supply: 3.3V - 5VDC - Operating temperature: -20 - 70
- Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 "

OEM
Add to wish list

It is a monochrome OLED display module with a 128x64 resolution dot matrix

and an IC2 interface.

Compared to the LCD, OLED displays are Much more competitive, they have a number of advantages such as high brightness, self-emission, high contrast ratio, wide viewing angle, wide temperature range, and low power consumption.

Screen OLED 0.96" 128x64 Blue I2C features:

- Interface: I2C (logical level 3.3V)
- Resolution: 128 x 64
- Angle of view: & gt; 160 degree
- Screen color: blue
- Screen Dimension: 2.43cm / 0.96 "
- IC Controller: SSD1306
- Power supply: 3.3V - 5VDC
- Operating temperature: -20 - 70
- Size: 2.2x 2.8x 1.2 cm / 0.87x 1.1x 0.47 "
- Application: smart watch, MP3, thermometer, instruments, DIY projects, etc ...
- The screen includes the driver IC SSD1306 128 x 64 Segment Driver / OLED / PLED Common.

Useful links for programming Arduino / Raspberry and projects with Arduino / Raspberry boards:

Communicate with OLED 0.96 '' screen

p>

- Connect the OLED 0.96´´ screen with the UNO module

Draw graphics on the OLED 0.96 '' screen div>

Write texts on the OLED 0.96 '' screen

- Application with a DHT22 temperature / humidity sensor / AM2302

Data sheet

Interfaces
12C
Dimensions
0.96''

Customers who bought this product also bought

Buzzer 5V Active Buzzer 4 to 7V DC

Buzzer alarm to convert electrical to acoustic signals in robotics devices and Arduino projects.
Buzzer 5V Active Buzzer 4 to 7V DC features:

- Input voltage: 4V to 7V
- Diameter: 12mm
- Height: 9.5mm
- Spacing Pins: 7.6mm
- Maximum Current:

M0007

Price €0.37

NEC IR Remote Control Infrared emitter HX1838

Arduino Raspberry Remote Control HX1838 Infrared Emitter

NEC IR Remote Control Infrared emitter HX1838 features:

- 21 keys
- Measurements 85x 40x 5mm
- Includes battery
Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards:
Send / Receive information via IR
- Wiring of the IR Remote control + Infrared IR Receiver VS1838 with UNO module
- Lighting a red 3mm LED by Infrared
Realization of a manageable Infrared robot
- Wiring the IR Distance remote control + Infrared IR Receiver VS1838 with the UNO module
- Fix the IR Distance remote control + VS1838 Infrared IR Receiver in a Mini 2WD DIY Car Robot Kit

W0020

Price €0.81

TDA7498 Class D 2X100W Amplifier

Characteristic: - Quiescent current: 50 mA (without load)
- Efficiency: 90%
- Nominal output power max.: 2 x 100W
- Frequency response: 20Hz to 20KHz
- Operating voltage: DC20V to DC34V
- Recommended supply voltage: DC32V
- Speaker parameters: 6 Ohm , 8 Ohm
- PCB board size: 87 × 72 mm
- Package includes cable

M0035

Price €16.12

Dupont Connector 2.54mm Female

Dupont Connector 2.54mm Female features:
- Connector for soldering or crimping
- Lot 100 units
- Ideal for your projects electronic, arduino, but can also be used with other microcontrollers

K0110

Price €1.81

ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi

NodeMcu module based on ESP8266 controller and programming in Lua language
NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC
ESP8266-12E is an improved version of ESP8266-12
It works as a standard WiFi 802.11 b / g / n 2.4 GHz
USB Communication - CP2102 Chip
Characteristic:
ESP 12E ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi features:

- Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP stack
- PLL, regulators and integrated power management units
- Output power: 0 , 15 (W); + 19.5dBm in 802.11b mode

W0014

Price €4.09

Support for HC-SR04 Ultrasonic Sensor

Support for ultrasounds, HC-SR04 distance meter.
Ideal to install the sensor on mobile platforms such as robots, vehicles, etc. Support for HC-SR04 Ultrasonic Sensor features:
- Material: Acrylic
- Color: transparent
- Includes screws

S0005

Regular price €1.20 -€0.50 Price €0.70

ADXL345 3-Axis Accelerometer SPI and I2C

Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32.
It serves to measure the static acceleration, for example gravity, in applications where you need to measure the inclination.
Also to measure dynamic acceleration, movement. ADXL345 3-Axis Accelerometer SPI and I2C features:
- Type: 3-axis accelerometer
- Chip: ADXL345
- Supply voltage: 3-5V
- Consumption: 40uA active and 0.1uA on hold
- Communication: SPI and I2C
- Measurements: Static and dynamic acceleration
- Accelerometer scales ± 2g, ± 4g, ± 8g and ± 16g
- Resolution: 13 bits
- Dimensions: 20x16mm
- Operating temperature: -40 °C to +80 °C
- Detection: Free fall, click-double click

M0018

Price €2.55

Related articles on blog

No related article on blog

€6.20
Save €1.51 €4.69

4,69 tax excl.

Out of stock
Do you want to receive an alert when product is back in stock?
 
We will send you an email once the product becomes available. Your email address will not be shared with anyone else.
Regular price €6.20 Price €4.69

Order until 4pm we will send today
30 days return