LCD Display Screen Green 20x4 2004
  • LCD Display Screen Green 20x4 2004
  • LCD Display Screen Green 20x4 2004

LCD Display Screen Green 20x4 2004

P0017

- It consists of a screen of 20 characters and 4 rows
- Ideal for projects with ARDUINO
- You can use it with PIC, AVR, STM32 LCD Display Screen Green 20x4 2004 features:
- LCD screen, 20 characters and 4 lines
- 5V power
- Retro green background illuminated, black letters

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

LCD Display Screen Green 20x4 2004 description


- It consists of a screen of 20 characters and 4 rows
- Ideal for projects with ARDUINO
- You can use it with PIC, AVR, STM32

LCD Display Screen Green 20x4 2004 features:


- LCD screen, 20 characters and 4 lines
- 5V power
- Retro green background illuminated, black letters

Data sheet

Color
verde
Filas de carácteres
20x4

Customers who bought this product also bought

Module MAX3232 Converter RS232 to TTL Port DB9 female

This product is widely used in radio modifications, cell phone flash, xbox360 flash detection, GPS, car, Flash, HDD repair, top box upgrade.
It can be used to download MCU types. Module MAX3232 Converter RS232 to TTL Port DB9 female features:
- Input voltage: 3.3 - 5 VDC
- Multi-channel RS232 controller / receiver MAX3232
- Transmission / reception speed up to 250 kbit / s
- DB9 serial port
- Interface with four pins:
       - TX: transmission signal
       - RX: reception signal
       - VCC: Supply voltage
       - GND: connects the power cathode
- Operating temperature: -65 ° C - + 150 ° C
- UART communication
- Includes a 4-wire female / female connector for easy connection with the arduino

C0016

Price €2.40

Mini DC Converter 1.8A Downstream Voltage Regulator 4.7-23V to 1.0-17V

Mini DC Converter 1.8A Downstream Voltage Regulator 4.7-23V to 1.0-17V features:
- Voltage Drop Module
- Use a multimeter to check the output voltage and adjust the potentiometer
- Small size: 17mm x 11mm
- Input voltage: 4.75-23V
- Output voltage: 1.0-17V
- Current output: 1.8A (peak max. 3A)
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 240kHz
- Conversion efficiency: up to 96%
- Output ripple: 30mV (no-load) - Voltage regulation: ± 2.5%

A0024

Price €2.06

Solar panel DIY 6V 1.1W 200mA

Solar panel DIY 6V 1.1W 200mA features:
- DIY Mobile Photovoltaic Charger
- Working Voltage: 6V
- Output Power: 1.1W
- Working current: max. 200 mA
- Product size: 112x 84x3 mm

A0064

Price €4.88

E18-D80NK Infrared Obstacle Avoidance Sensor Module 3-80cm Smart Car

Ideal for projects with ARDUINO, Smart Car
Detects transparent and translucent obstacles
E18-D80NK Infrared Obstacle Avoidance Sensor Module 3-80cm Smart Car features:
- Current consumption: up to 100 mA
- Supply voltage 5V
- Current consumption <25mA
- Response time of 2 ms
- Measured distance: 3-80cm 15st angle
- Screw to adjust the sensitivity, the back
- Output status led indicator
- Operating temperature: -25°C - + 55°C
- Material: high-strength plastic
- Type of output: normally open, NPN
- Dimensions: 18 mm in diameter, Length 45 mm
- Cable length 55cm
- Departures:
      - Brown: +
      - Blue: -
      - Black: OUT

S0004

Price €5.74

A4988 + Stepstick Radiator Stepper Motor Reprap

Stepstick A4988 controller
Driver for stepper motors
Used with Ramps 1.4 - RepRapArduino Mega Pololu Shield
A4988 + Stepstick Radiator Stepper Motor Reprap features:

- Minimum operating voltage: 8 V
- Operating voltage maximum: 35 V
- Maximum current: ± 2 A (adequately ventilated or refrigerated)
- Logic voltage: 3 V / 5.5V
- Microstep resolution: full, 1/2, 1/4, 1/8, and 1/16
- Factory soldered temples
- Use potentiometer to adjust current
- Measurements: 20x16x12 mm

I0014

Price €1.57

M18 Inductive Proximity Sensor

M18 Inductive Proximity Sensor features:
- Inductive proximity sensor detection switch LJ18A3-8-Z / BX
- NPN DC6-36V
- A Often used for 3D printer bed leveling
- Cylindrical cable type DC 3 cable type (black, brown, blue)
- Inductive sensor type
- NPN NO (Normal Open )
- Detecting distance 8mm
- DC supply voltage 6-36V
- Current output 300mA
- Response frequency 0.5KHz
- Detects iron / aluminum - Operating temperature -25 ° C to + 70 ° C (Non-freezing condition)
- Head diameter 18 mm
- Size 6.9 x 2cm
- Cable length 90cm

S0042

Price €2.88

1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino

1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino features:
- Channel: 1 (protected with Optocoupler)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator
- Dimensions: 30x 54mm
- Has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

RL001

Price €1.98
€7.02

7,02 tax excl.

1
30+ items
Price €7.02

Order until 4pm we will send today
30 days return