ENC28J60 Ethernet LAN Network Module for Arduino AVR LPC STM3 The network module communicates with the Arduino type board through the SPI protocol ideal for projects with ARDUINO, PIC, AVR, STM32. ENC28J60 Ethernet LAN Network Module for Arduino AVR LPC STM3 features: - Chip ENC28J60 Microchip- Module: 10Base-T- 3.3V power- SPI interface- 25Mhz speed- LED status LED- Hanrun network transformer- Network Interface board HR911105A- Operating temperature: -40ºC to + 85ºC- Dimensions: 55x 35x 16 mm Code W0002 Available Price €7.43
BMP280 Temperature Barometric Pressure Sensor Module/SPI This module includes the BMP280 component that converts atmospheric pressure, temperature and humidity with high precision into a digital signal.The equipment uses the two I2C and SPI interfaces. The very good measurements made by the BMP280 allows the module to be used as an altimeter.Its 5-pin straight connector allows easy connection to other electronic boards. BMP280 Temperature Barometric Pressure Sensor Module/SPI features: - Interfaces: -I2C (up to 3.4 MHz) -SPI (up to 10 MHz)- Supply voltage: 1.8-5VDC- Module operating range: - Temperature: -40ºC to + 85ºC0-100% - Pressure: 300-1100 hPa- Resolution of the measures: - Temperature: 0.01ºC Code M0134 ✗ Out-of-Stock Regular price €4.12 -€1.00 Price €3.12
ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi NodeMcu module based on ESP8266 controller and programming in Lua language NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC ESP8266-12E is an improved version of ESP8266-12 It works as a standard WiFi 802.11 b / g / n 2.4 GHz USB Communication - CP2102 Chip Characteristic: ESP 12E ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi features: - Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V) - Supported protocols: 802.11 b / g / n - Network support: 2.4 GHz - Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point - Integrated TCP / IP stack - PLL, regulators and integrated power management units - Output power: 0 , 15 (W); + 19.5dBm in 802.11b mode Code W0014 Available Price €4.09
Micro SD Card Reader/Recorder The micro SD card reader module is a simple solution for transferring data to and from a standard micro SD card.The pinout is directly compatible with Arduino, but it can also be used with other microcontrollers.Ideal for projects with ARDUINO, PIC, AVR, STM32.Micro SD Card Reader/Recorder features:- Supply voltage: 4.5V- 5.5V- Adjustable 3.3V built-in regulator for SPI pins- Consumption <200mA- Interface: SPI- Dimensions: 24mmx 42mm x 12mmSupports microSD cards (up to 2G) and micro SDHC (up to 32G) Code M0006 Available Price €2.06
MPU-6050 Accelerometer Module + Gyroscope 3 Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32. MPU-6050 Accelerometer Module + Gyroscope 3 features:- Chip: MPU-6050- Power supply: 3V-5V- Operating current: 5mA- Communication: I2C- 16-bit analog-digital converter on all axes- Gyroscope scales: ± 250, ± 500, ± 1000 and ± 2000 ° / sec (dps) (programmable by the user)- Accelerometer scales: ± 2g, ± 4g, ± 8g and ± 16g (programmable by the user)- Dimensions: 14 x 21 x 1.3mm- Quantity: 1 unit (1 strip of 8 pin + 1 strip of 8 layered pin) Code M0017 ✗ Out-of-Stock Price €3.55
Protoboard Breadboard 9x15cm Protoboard Breadboard 9x15cm features: -PCB dimension: 9x15cm-Hole diameter: 1mm -Pitch: 2.54mm-Bakelite with copper fields Code PB016 Backorder Price €0.62
ESP8266 WIFI Module ESP-01 for Electronic Sensor Robotics WIFI transceiver based on the ESP8266 controller. It has a microcontroller and 2 GPIO pins to be able to operate autonomously without the need for an external microcontroller. Characteristic: - Voltage of power: 3.3V - Supported protocols: 802.11 b / g / n - Network support: 2.4 GHz - Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point - Integrated TCP / IP stack - PLL, regulators and integrated power management units - Output power: 0.15 (W); + 19.5dBm in 802.11b mode - Consumption in low power mode: Code W0003 Available Price €1.61
Red Laser Diode Module 650nm 5mW 6mm 5V lL2N4 This module adapted for the arduino includes a laser diode and a 3-pin connector for a simple and quick adaptation with the Arduino. The diode is mainly used for laser toys, all kinds of level meter, instruments, stylus pen, mini LCD projector, remote listeners laser, alarm anti-theft light remote control. Light shots and different display can make the color of the image element a little different from the real object. The measurement allowed error is +/- 1-3 cm. Characteristic: - Supply voltage: 5VDC - Connector of 3 pins: 1- GND 2- VCC 3- Light control of the laser diode - Point mode: point facula - Continuous output - Operating temperature: -36 ° C - + 65 ° C - Laser wavelength: 650nm (red) Code M0077 Available Price €1.23
LCD Display Screen 12864ZW 128x64 Dots Graphic Blue Backlight Ideal for projects with ARDUINOYou can use it with PIC, AVR, STM32LCD Display Screen 12864ZW 128x64 Dots Graphic Blue Backlight features:- Graphic LCD Screen 128x64 points- 5V power- Blue retro background illuminated, white letters- Controller ST7920- Parallel / serial communication- Dimensions PCB 93x70mm Code P0140 ✗ Out-of-Stock Price €6.88
16x2 LCD screen 1602 Blue welded pins It consists of a 16-character, 2-row display The display is compatible with the HD44780 controller Ideal for projects with Arduino You can use it with PIC, AVR, STM32 16x2 LCD screen 1602 Blue welded pins features: - LCD screen, 16 characters and 2 lines - 5V power supply - HD44780 compatible controller - Backlit blue background, white letters - Includes an adjustable contrast pin - It has soldered pins and is ready to connect - Dimensions (mm): 80 x 36 x 19 Code P0154 Available Price €3.26
LCD Display Screen Blue Backlight 20x4 2004 It works exactly the same and with the same libraries as an LCD1602.It consists of a display of 20 characters and 4 rows.Ideal for projects with Arduino.You can use it with PIC, AVR, STM32. LCD Display Screen Blue Backlight 20x4 2004 features:- LCD screen, 20 characters and 4 lines- 5V power- Backlit blue background, white letters Code P0002 Available Price €7.40
LCD Display Screen 3.3V Blue Backlight 8x2 JMD0802B 2 White Characters It is an LCD screen with a resolution of 8x2 characters to white letters. Its operating voltage is 3.3V and is managed through its 14 solderable connections. The control of the visualization is made by the component AIP7660E0 8 pins N-FET which is a linear regulating contractor. LCD Display Screen 3.3V Blue Backlight 8x2 JMD0802B 2 White Characters features: - Operating voltage: 3.3V- Model JMD0802B see: 2- Matrix of points: 8x2- Size of the viewing area: 38x16 mm- Linear controller controller: AIP7660E0 8 pin N-FET- Size: 58x32x13.2 mm Code P0130 Available Price €2.06
LCD 1604 Display Screen Blue Backlight 16x4 characters It consists of a display of 16 characters and 4 rows.Ideal for projects with Arduino.You can use it with PIC, AVR, STM32. LCD 1604 Display Screen Blue Backlight 16x4 characters features:- LCD screen, 16 characters and 4 lines- 5V power- Backlit green background, white letters- Include an adjustable contrast pin Code P0150 ✗ Out-of-Stock Price €3.97
16x2 LCD screen 1602 HD44780 Green background It consists of a 16-character, 2-row display. The display is compatible with the HD44780 controller. Ideal for projects with ARDUINO. You can use it with PIC, AVR, STM32. Characteristic: - LCD screen, 16 characters and 2 lines - 5V power supply - HD44780 compatible controller - Backlit blue background, black letters - Include an adjustable contrast pin - Dimensions (mm): 80 x 36 x 12 Code PV014 Available Regular price €2.72 -€0.50 Price €2.22
Serial Enabled 16x2 LCD - White on Black 5V It is the freshest serial LCD from SparkFun. Similarly to other SparkFun LCD screens it is put on single board with a microcontroller, however in contrast to the other screens in our offer (SP027 and SP028) it is based on PIC16F88 rather than ATmega328. Code SP035 Last items in stock Regular price €30.57 -€10.00 Price €20.57
Keyboard Shield 16x2 LCD screen for Arduino It is made up of a 16-character, 2-row, 6-button display. The display is compatible with the HD44780 controller and is connected in 4-bit mode so it can be used directly through the Arduino LiquidCrystal library. Ideal to navigate through the different parts of the configuration or map. Keyboard Shield 16x2 LCD screen for Arduino features: > - 2x16 LCD with blue backlight and white characters - Potentiometer to modify the LCD contrast - 5-push-button keyboard + RESET - Use of the minimum possible channels - Full compatibility with Arduino UNO and Mega - The display is compatible with the HD44780 controller - Response time: 30 ms - Size: 80 x 60 x 22 mm Code P0020 Available Price €3.71
LCD Display Screen Blue 1602 + Adapter Board Module IIC/I2C - It consists of a display of 16 characters and 2 rows- The display is compatible with the HD44780 controller- Ideal for projects with ARDUINO- You can use it with PIC, AVR, STM32 PCF8574 -> the default address 0x20PCF8574A -> the default address 0x3F- It can be changed to any between 0x20 and 0x27 depending on whether you have soldiers or not pins A0 A1 A2 Screen LCD Display Screen Blue 1602 + Adapter Board Module IIC/I2C features: - LCD screen, 16 characters and 2 lines- 5V power- HD44780 compatible controller- Backlit blue background, white letters- Include an adjustable contrast pin- Dimensions (mm): 80 x 36 x 12 Adapter LCD Display Screen Blue 1602 + Adapter Board Module IIC/I2C features: Code KT002 Available Regular price €3.34 --€0.66 Price €4.00
LCD Display Screen 12864 128x64 Dots Graphic Blue Backlight Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32. LCD Display Screen 12864 128x64 Dots Graphic Blue Backlight features:- Graphic LCD Screen 128x64 points- 5V power- Blue retro background illuminated, white letters- Controller ST7920- Parallel / serial communication- Dimensions PCB 93x70mm Code P0015 Available Price €8.22
LCD Display Screen 12864ZW 128x64 Dots Graphic Blue Backlight Ideal for projects with ARDUINOYou can use it with PIC, AVR, STM32LCD Display Screen 12864ZW 128x64 Dots Graphic Blue Backlight features:- Graphic LCD Screen 128x64 points- 5V power- Blue retro background illuminated, white letters- Controller ST7920- Parallel / serial communication- Dimensions PCB 93x70mm Code P0140 ✗ Out-of-Stock Price €6.88
16x2 LCD screen 1602 Blue welded pins It consists of a 16-character, 2-row display The display is compatible with the HD44780 controller Ideal for projects with Arduino You can use it with PIC, AVR, STM32 16x2 LCD screen 1602 Blue welded pins features: - LCD screen, 16 characters and 2 lines - 5V power supply - HD44780 compatible controller - Backlit blue background, white letters - Includes an adjustable contrast pin - It has soldered pins and is ready to connect - Dimensions (mm): 80 x 36 x 19 Code P0154 Available Price €3.26
LCD Display Screen Blue Backlight 20x4 2004 It works exactly the same and with the same libraries as an LCD1602.It consists of a display of 20 characters and 4 rows.Ideal for projects with Arduino.You can use it with PIC, AVR, STM32. LCD Display Screen Blue Backlight 20x4 2004 features:- LCD screen, 20 characters and 4 lines- 5V power- Backlit blue background, white letters Code P0002 Available Price €7.40
LCD Display Screen 3.3V Blue Backlight 8x2 JMD0802B 2 White Characters It is an LCD screen with a resolution of 8x2 characters to white letters. Its operating voltage is 3.3V and is managed through its 14 solderable connections. The control of the visualization is made by the component AIP7660E0 8 pins N-FET which is a linear regulating contractor. LCD Display Screen 3.3V Blue Backlight 8x2 JMD0802B 2 White Characters features: - Operating voltage: 3.3V- Model JMD0802B see: 2- Matrix of points: 8x2- Size of the viewing area: 38x16 mm- Linear controller controller: AIP7660E0 8 pin N-FET- Size: 58x32x13.2 mm Code P0130 Available Price €2.06
LCD 1604 Display Screen Blue Backlight 16x4 characters It consists of a display of 16 characters and 4 rows.Ideal for projects with Arduino.You can use it with PIC, AVR, STM32. LCD 1604 Display Screen Blue Backlight 16x4 characters features:- LCD screen, 16 characters and 4 lines- 5V power- Backlit green background, white letters- Include an adjustable contrast pin Code P0150 ✗ Out-of-Stock Price €3.97
16x2 LCD screen 1602 HD44780 Green background It consists of a 16-character, 2-row display. The display is compatible with the HD44780 controller. Ideal for projects with ARDUINO. You can use it with PIC, AVR, STM32. Characteristic: - LCD screen, 16 characters and 2 lines - 5V power supply - HD44780 compatible controller - Backlit blue background, black letters - Include an adjustable contrast pin - Dimensions (mm): 80 x 36 x 12 Code PV014 Available Regular price €2.72 -€0.50 Price €2.22
Serial Enabled 16x2 LCD - White on Black 5V It is the freshest serial LCD from SparkFun. Similarly to other SparkFun LCD screens it is put on single board with a microcontroller, however in contrast to the other screens in our offer (SP027 and SP028) it is based on PIC16F88 rather than ATmega328. Code SP035 Last items in stock Regular price €30.57 -€10.00 Price €20.57
Keyboard Shield 16x2 LCD screen for Arduino It is made up of a 16-character, 2-row, 6-button display. The display is compatible with the HD44780 controller and is connected in 4-bit mode so it can be used directly through the Arduino LiquidCrystal library. Ideal to navigate through the different parts of the configuration or map. Keyboard Shield 16x2 LCD screen for Arduino features: > - 2x16 LCD with blue backlight and white characters - Potentiometer to modify the LCD contrast - 5-push-button keyboard + RESET - Use of the minimum possible channels - Full compatibility with Arduino UNO and Mega - The display is compatible with the HD44780 controller - Response time: 30 ms - Size: 80 x 60 x 22 mm Code P0020 Available Price €3.71
LCD Display Screen Blue 1602 + Adapter Board Module IIC/I2C - It consists of a display of 16 characters and 2 rows- The display is compatible with the HD44780 controller- Ideal for projects with ARDUINO- You can use it with PIC, AVR, STM32 PCF8574 -> the default address 0x20PCF8574A -> the default address 0x3F- It can be changed to any between 0x20 and 0x27 depending on whether you have soldiers or not pins A0 A1 A2 Screen LCD Display Screen Blue 1602 + Adapter Board Module IIC/I2C features: - LCD screen, 16 characters and 2 lines- 5V power- HD44780 compatible controller- Backlit blue background, white letters- Include an adjustable contrast pin- Dimensions (mm): 80 x 36 x 12 Adapter LCD Display Screen Blue 1602 + Adapter Board Module IIC/I2C features: Code KT002 Available Regular price €3.34 --€0.66 Price €4.00
LCD Display Screen 12864 128x64 Dots Graphic Blue Backlight Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32. LCD Display Screen 12864 128x64 Dots Graphic Blue Backlight features:- Graphic LCD Screen 128x64 points- 5V power- Blue retro background illuminated, white letters- Controller ST7920- Parallel / serial communication- Dimensions PCB 93x70mm Code P0015 Available Price €8.22