Solar charger USB DC mobile power supply This USB mobile solar charger automatically identifies all smartphones. Its 5V - 2A output is constant. Restarting is automatic after the sun has been weaker. Compatible with most smartphones, tablets, ipad, digital cameras, etc ... Solar charger USB DC mobile power supply features: - Operating temperature: -40 ° C - 85 ° C - Input voltage: 3.6 - 20 VDC - Output voltage: 5 VDC - Output current: 2A - Conversion efficiency: 95% - Size: 30x25x117 mm Code A0075 ✗ Out-of-Stock Price €9.49
DS18B20 Temperature Sensor 0.5ºC TO-92 Also available with waterproof casing and 100cm cable and 200cm. DS18B20 Temperature Sensor TO-92 0.5ºC Precision 5V Integrated features:- Device function: Temperature sensor- Type of output: Digital- Supply voltage: 3V to 5.5V- Accuracy: ± 0.5ºC- Temperature threshold: Programmable- Operating temperature: -55ºC to + 125ºC- Encapsulated: TO-92- Supply current: 1.5mA Code S0014 Available Price €1.95
Servo 9g SG92r 2.5kg 9g digital servo new version of SG90. POM with Carbon fiber gears set and control arms are more durable use than SG90 nylon gear and more torque. It is a good choice for park size 3D models , high speed jets and R/C airplane 250 450 RC helicopter Servo 9g SG92r 2.5kg features: Weight: 9g Operating voltage: 4.8v Stall torque: 2.5kg /cm(4.8v) Gear type: POM with carbon fiber Operating speed: 0.1sec /60degree (4.8v) Temperature range: 0„ƒ_ 55„ƒ Dead band width:1us servo wire length: 25 cm Servo Plug: JR (Fits JR and Futaba) servo arms &screws included and fit with Futaba servo arm Code R0079 Available Price €4.30
IR Remote Control + IR Infrared Receiver VS1838 IR Remote Control + IR Infrared Receiver VS1838 features: - The test distance is about 5-8 meters, but practical application depends on environmental factors (such as diaphragm, glass , obstructions or other material blockage) - The CHQ1838 / HX1838 receiver receives the 38kHz signal - Vcc supply: 3.3V-5V - IN digital output to connect to the port Arduino I / O - Remote measurements 85x 40x 5mm - Includes battery Useful links for Arduino / Raspberry programming and projects with Arduino boards / Raspberry: Send / Receive information via IR - Wiring of the IR Remote control + Infrared IR Receiver VS1838 with the UNO module - Light a 3mm red LED by Infrared Code W0021 Available Price €2.49
Yellow 3D-pen for ABS / PLA filaments Yellow 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Yellow 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: yellow, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0152 Last items in stock Regular price €23.99 -€2.00 Price €21.99
Logic Level Converter 3.3 / 5V I2C IIC 3.3V/5V I2C logic level converter module with soldering pins.Ideal to connect a device that works at 3.3V to one that works with 5V.It works with digital signals (high and low levels).Logic Level Converter 3.3 / 5V I2C IIC features:- Voltage: 3.3V/5V- Measures: 1.5x 1 cm Code C0004 Available Price €1.69
L298N Motor Drive Controller Board Module Dual H Bridge DC with interruptor It allows controlling up to 2 direct current motors or a bipolar stepper motor. It also allows to control a unipolar stepper motor configured as bipolar.Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32.It incorporates a switch for the connection and disconnection of the entire module. L298N Motor Drive Controller Board Module Dual H Bridge DC with interruptor features: - Minimum operating voltage: 5 V- Maximum operating voltage: 35 V- Maximum current: ± 2 A- Logic voltage: 5V- PWM signal inputs for speed control- Outputs: for 2 DC motors or for a bipolar stepper motor- Measures: 43x43x24 mm Helpful Links: Operation of the robot by Infrared / Operation of the robot by Bluetooth /> Code M0183 Available Price €3.79
15x Electrolytic Capacitor 10uF 25V 105ºC PIC for Arduino 15x Electrolytic Capacitor 10uF 25V 105ºC PIC Arduino features:-Type: Electrolytic Capacitor-Assembly: intern-Value: 10uF-Maximum tension: 25V-Maximum temperature: 105º C-Dimensions: 5x11mm-Quantity: 15 units Code D0039 Available Price €0.09
Adapter / Converter HDMI male - VGA female + Audio Jack cable Descripción: El adaptador de HDMI a VGA le permite conectar un monitor, proyector o LCD analógico estándar que usa un conector o cable VGA a un cuaderno, DVD, TVbox, reproductor BIU-rog, computadora, proyector. Característica: - Tipo: adaptador/convertidor AV,- Conector A: HDMI macho,- Conector B: VGA hembra,- Conexión Split / Duplicación: ninguna (1: 1),- El adaptador dispone de una entrada audio Jack hembra,- Ancho del cable del adaptador: 15cm,- Incluye un cable audio Jack macho de ambos lados,- Ancho del cable audio: 52cm,- Color: blanco. Code C0019 Available Price €7.50
SparkFun FTDI Basic Breakout - 5V This FTDI breakout is a super small board with a standard FT232RL USB to serial IC circuit. The pinout fits FTDI cable making it compatible with any Arduino or Arduino compatible 5V boards. Code SP023 Available Price €19.99
PL2303HX PL2303 USB to UART TTL Cable Module RS232 Converter 4 Pin Ideal for connecting TTL RS232 devices to your PC through the USB port. PL2303HX PL2303 USB to UART TTL Cable Module RS232 Converter 4 Pin features: - Compatible controller PL2303HXA- 4 pins: 5.0V (red), TxR (green), RxD (white), GND (black)- 2.5A self-recovery protective fuse- Supported OS: Win8, Win10, WinME, Win2003, Win XP, Vista, Win 7 The 64-bit Prolific drivers provided by Microsoft through Windows Update will not work with most adapters and will therefore generate the generic "Code 10" error. Code C0002 Available Price €2.79
RS232 USB to Serial TTL Adapter Module - USB to Serial PL2303HX PL2303 Ideal to connect TTL RS232 devices to your PC through the USB port. RS232 USB to Serial TTL Adapter Module - USB to Serial PL2303HX PL2303 features: > - Compatible PL2303 controller - 5 pins: 3.3V, 5.0V, TxR, RxD, GND - Heat shrinkable insulating cover - Led data transmission indicators - 2.5A self-recovery protector fuse - Supported OS: Win ME, Win2003, Win XP, Vista, Win 7 - Weight: 40 gr. (approx.) Code C0005 Available Price €1.49
Adapter module CH340G LC Technology -TTL UART 5V series This is a CH340G TTL UART 5V serial adapter, designed to allow adding a USB connection to your project. In addition, this opens up the possibility of programming microcontrollers like the Arduino Pro mini. This module allows you to connect your project, from programming small microcontrollers to a custom computer keyboard. The module is ready for use of a UART connection. This may require the installation of a driver; however, it is a standard driver distributed by Microsoft Windows Update, available in Linux and that can be configured in MAC OS. Adapter module CH340G LC Technology -TTL UART 5V series features: - Manufacturer: LC Technology, - Communication chipset: CH340G - Communication: UART, - Pin connection: Code M0186 Available Regular price €2.50 -€0.51 Price €1.99
FT232 USB to TTL Serial Converter Adapter Module 5V 3.3V + Cable A virtual serial port to your PC through the USB port. FT232 USB to TTL Serial Converter Adapter Module 5V 3.3V + Cable features: - USB-Serial TTL 3.3V -5V Converter - LED indicator for Tx, Rx, power supply - Communication: Transceiver RX / TX TTL COM Virtual RS232 - Voltage: 3.3V or 5V - via jumper - Pins: DTR, RX, TX, VCC, CTS, GND - Protections: Electronic fuse up to 500mA - Size: 35 x 17 mm Pitch 2,54mm - Connection: Mini USB. Driver: W98 / W2000 / W2003 / W2008 / WinXP / WinVista / W7 / W8 / Linux / Mac Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards: User manual for remote control + 4-channel receiver 315 MHz IC2262 - Wire the USB /> Code C0007 Available Price €3.95
TTL Converter Module 5V - 3.3V Bidirectional 2 Channel I2C Logic Level This bidirectional logic level converter can be used with normal series, I2C, SPI and other digital signals. It does not work with an analog signal.It is very easy to use. The card must be powered from the two voltages (high and low voltage) used by the system.A high voltage (5 V for example) to the pin "HV", low voltage (3.3 V for example) in "LV", and the system ground to pin "GND". TTL Converter Module 5V - 3.3V Bidirectional 2 Channel I2C Logic Level features: - 2 high voltage channels and low voltage logic logic for bidirectional translation- 2 low voltage channels High voltage high voltage logic in unidirectional conversion- The board module is compatible, it can be inserted directly in the use test panel- HV to 5 V power Code M0154 Available Regular price €4.59 -€1.60 Price €2.99
SparkFun FTDI Basic Breakout - 3.3V This FTDI breakout is a super small board with a standard FT232RL USB to serial IC circuit. The pinout fits FTDI cable making it compatible with any Arduino or Arduino compatible 5V boards. Code SP024 Available Price €19.99
Optical Isolated Converter FT232RL USB 2.0 to RS485 This converter has an internal DC / DC supply and a total isolation between the USB and the RS485 output and allows to establish a reliable and safe communication.Its FT232RL component has excellent compatibility and a communication rate up to 3M for a maximum distance of 1.2 km. The RS485 output interface uses an optical coupler with high speed for an optical insulation of 1500V and a protection against lightning of 600W: these characteristics allow to protect the computer from the potential damage of static electricity, lightning, over voltages and ground faults. Optical Isolated Converter FT232RL USB 2.0 to RS485 features: - Required systems: WINDOWS CE / 2000 / XP / VISTA / WIN 7 / LINUX / MAC OS- Internal DC /> Code C0015 Backorder Price €25.49
Logic Level Converter 3.3 / 5V I2C IIC 3.3V/5V I2C logic level converter module with soldering pins.Ideal to connect a device that works at 3.3V to one that works with 5V.It works with digital signals (high and low levels).Logic Level Converter 3.3 / 5V I2C IIC features:- Voltage: 3.3V/5V- Measures: 1.5x 1 cm Code C0004 Available Price €1.69
Adapter / Converter HDMI male - VGA female + Audio Jack cable Descripción: El adaptador de HDMI a VGA le permite conectar un monitor, proyector o LCD analógico estándar que usa un conector o cable VGA a un cuaderno, DVD, TVbox, reproductor BIU-rog, computadora, proyector. Característica: - Tipo: adaptador/convertidor AV,- Conector A: HDMI macho,- Conector B: VGA hembra,- Conexión Split / Duplicación: ninguna (1: 1),- El adaptador dispone de una entrada audio Jack hembra,- Ancho del cable del adaptador: 15cm,- Incluye un cable audio Jack macho de ambos lados,- Ancho del cable audio: 52cm,- Color: blanco. Code C0019 Available Price €7.50
SparkFun FTDI Basic Breakout - 5V This FTDI breakout is a super small board with a standard FT232RL USB to serial IC circuit. The pinout fits FTDI cable making it compatible with any Arduino or Arduino compatible 5V boards. Code SP023 Available Price €19.99
PL2303HX PL2303 USB to UART TTL Cable Module RS232 Converter 4 Pin Ideal for connecting TTL RS232 devices to your PC through the USB port. PL2303HX PL2303 USB to UART TTL Cable Module RS232 Converter 4 Pin features: - Compatible controller PL2303HXA- 4 pins: 5.0V (red), TxR (green), RxD (white), GND (black)- 2.5A self-recovery protective fuse- Supported OS: Win8, Win10, WinME, Win2003, Win XP, Vista, Win 7 The 64-bit Prolific drivers provided by Microsoft through Windows Update will not work with most adapters and will therefore generate the generic "Code 10" error. Code C0002 Available Price €2.79
RS232 USB to Serial TTL Adapter Module - USB to Serial PL2303HX PL2303 Ideal to connect TTL RS232 devices to your PC through the USB port. RS232 USB to Serial TTL Adapter Module - USB to Serial PL2303HX PL2303 features: > - Compatible PL2303 controller - 5 pins: 3.3V, 5.0V, TxR, RxD, GND - Heat shrinkable insulating cover - Led data transmission indicators - 2.5A self-recovery protector fuse - Supported OS: Win ME, Win2003, Win XP, Vista, Win 7 - Weight: 40 gr. (approx.) Code C0005 Available Price €1.49
Adapter module CH340G LC Technology -TTL UART 5V series This is a CH340G TTL UART 5V serial adapter, designed to allow adding a USB connection to your project. In addition, this opens up the possibility of programming microcontrollers like the Arduino Pro mini. This module allows you to connect your project, from programming small microcontrollers to a custom computer keyboard. The module is ready for use of a UART connection. This may require the installation of a driver; however, it is a standard driver distributed by Microsoft Windows Update, available in Linux and that can be configured in MAC OS. Adapter module CH340G LC Technology -TTL UART 5V series features: - Manufacturer: LC Technology, - Communication chipset: CH340G - Communication: UART, - Pin connection: Code M0186 Available Regular price €2.50 -€0.51 Price €1.99
FT232 USB to TTL Serial Converter Adapter Module 5V 3.3V + Cable A virtual serial port to your PC through the USB port. FT232 USB to TTL Serial Converter Adapter Module 5V 3.3V + Cable features: - USB-Serial TTL 3.3V -5V Converter - LED indicator for Tx, Rx, power supply - Communication: Transceiver RX / TX TTL COM Virtual RS232 - Voltage: 3.3V or 5V - via jumper - Pins: DTR, RX, TX, VCC, CTS, GND - Protections: Electronic fuse up to 500mA - Size: 35 x 17 mm Pitch 2,54mm - Connection: Mini USB. Driver: W98 / W2000 / W2003 / W2008 / WinXP / WinVista / W7 / W8 / Linux / Mac Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards: User manual for remote control + 4-channel receiver 315 MHz IC2262 - Wire the USB /> Code C0007 Available Price €3.95
TTL Converter Module 5V - 3.3V Bidirectional 2 Channel I2C Logic Level This bidirectional logic level converter can be used with normal series, I2C, SPI and other digital signals. It does not work with an analog signal.It is very easy to use. The card must be powered from the two voltages (high and low voltage) used by the system.A high voltage (5 V for example) to the pin "HV", low voltage (3.3 V for example) in "LV", and the system ground to pin "GND". TTL Converter Module 5V - 3.3V Bidirectional 2 Channel I2C Logic Level features: - 2 high voltage channels and low voltage logic logic for bidirectional translation- 2 low voltage channels High voltage high voltage logic in unidirectional conversion- The board module is compatible, it can be inserted directly in the use test panel- HV to 5 V power Code M0154 Available Regular price €4.59 -€1.60 Price €2.99
SparkFun FTDI Basic Breakout - 3.3V This FTDI breakout is a super small board with a standard FT232RL USB to serial IC circuit. The pinout fits FTDI cable making it compatible with any Arduino or Arduino compatible 5V boards. Code SP024 Available Price €19.99
Optical Isolated Converter FT232RL USB 2.0 to RS485 This converter has an internal DC / DC supply and a total isolation between the USB and the RS485 output and allows to establish a reliable and safe communication.Its FT232RL component has excellent compatibility and a communication rate up to 3M for a maximum distance of 1.2 km. The RS485 output interface uses an optical coupler with high speed for an optical insulation of 1500V and a protection against lightning of 600W: these characteristics allow to protect the computer from the potential damage of static electricity, lightning, over voltages and ground faults. Optical Isolated Converter FT232RL USB 2.0 to RS485 features: - Required systems: WINDOWS CE / 2000 / XP / VISTA / WIN 7 / LINUX / MAC OS- Internal DC /> Code C0015 Backorder Price €25.49
Logic Level Converter 3.3 / 5V I2C IIC 3.3V/5V I2C logic level converter module with soldering pins.Ideal to connect a device that works at 3.3V to one that works with 5V.It works with digital signals (high and low levels).Logic Level Converter 3.3 / 5V I2C IIC features:- Voltage: 3.3V/5V- Measures: 1.5x 1 cm Code C0004 Available Price €1.69