10x white LED 5mm short Characteristic:- Lens color: white,- Diameter of the bulb: 5 mm,- Operating current: 20mA,- Voltage: 2.0V-2.2V,- Wavelength: 588-590 nm,- Anode (A): Positive (long leg): 19mm,- Cathode (K): Negative (shorter leg): 17 mm,- Operating temperature: -25ºC / 80ºC,- Welding temperature: + 260ºC,- Quantity: 10 units. Code P0141 Available Price €0.17
Micro Servo 9g SG90 Tower Pro Micro Servo 9g SG90 features: - Operating voltage: 3.0-7.2V- Speed (4.8V without load): 0.12sec / 60 degrees- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)- Working temperature: -30 to +60 degrees C- Cable length: approx. 23cm- Includes photo accessories and screws- Dimensions: 22x11.5x27mm Code R0013 Available Regular price €2.22 -€0.20 Price €2.02
Hantek 20:1 attenuator - suitable for passive signal attenuation of a 1008C HT201 20:1 oscilloscope 300V Max This attenuator allows the oscilloscope to measure the fuel injector and primary ignition waveforms. Passive attenuator with a 20:1 attenuation Therefore, if a 20V signal is introduced, it will emit a 1V signal. Using this element, the oscilloscope can measure voltage higher than its range (*20V) Code H0211 Available Price €9.08
USB Cable for Arduino Type A-B USB Cable for Arduino Type A-B features: - Length: 50cm- Color: Blue Code K0158 Available Price €1.23
Electric tin soldering iron with adjustable temperature and LCD - 908S 80W The 908S 80W soldering iron has a power of 80W equipped with the 900M-B1.2 tip, LCD display to show the temperature setting (180 ~ 500 ℃). Fast heating. The tip is replaceable. The soldering iron is CE, RoHS certified. The kit includes 5 replacement tips and a welding holder. Code H0242 Available Regular price €14.04 -€3.50 Price €10.54
ESP8266 WIFI Module ESP-01 for Electronic Sensor Robotics WIFI transceiver based on the ESP8266 controller. It has a microcontroller and 2 GPIO pins to be able to operate autonomously without the need for an external microcontroller. Characteristic: - Voltage of power: 3.3V - Supported protocols: 802.11 b / g / n - Network support: 2.4 GHz - Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point - Integrated TCP / IP stack - PLL, regulators and integrated power management units - Output power: 0.15 (W); + 19.5dBm in 802.11b mode - Consumption in low power mode: Code W0003 Available Price €1.61
Pro Micro 5V 16Mhz Arduino Compatible Board It has an ATMega32U4 chip running at 16Mhz with a factory-loaded bootloader. It does not include pins so we can solder only the pins we need. Characteristic: - Microcontroller: ATmega32U4 - Operation: 5V - Power (max): 5-12V - Total I / O pins: 20 - PWM pins: 5 - Analog pins: 12 - Maximum current of I / O pins: 40 mA - Maximum current of pin 3.3V: 50 mA - Flash memory: 32 KB (4 KB used by the bootloader) - SRAM: 2.5 KB - EEPROM: 1 KB - Speed: 16 MHz - external interrupt - TWI / I2C, UART, SPI interfaces - Dimensions: 18x33mm - Weight: 30 grams Code B0022 Available Price €7.84
10x Multicolor LED 5mm 7 colors fast blink 5mm multicolor LED with automatic color change. 7 different colors are emitted and the blinking is fast. Code P0136 Available Price €0.12
ABS 20x Colors Filament 1.75mm 5m ABS 20x Colors Filament 1.75mm 5m features:- Ideal for 3D printing pen- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0300 ✗ Out-of-Stock Price €9.09
PLA Set of 20 colors Filament 1.75mm x 5m PLA Set of 20 colors Filament 1.75mm x 5m features:- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0301 ✗ Out-of-Stock Price €9.67
Purple 3D-pen for ABS / PLA filaments Purple 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Purple 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: purple, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0153 ✗ Out-of-Stock Regular price €19.83 -€2.00 Price €17.83
Blue 3D Pen and PLA Set of 20 colors Filament 1.75mm x 5m Blue 3D Pen and PLA Set of 20 colors Filament 1.75mm x 5m features:- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0303 ✗ Out-of-Stock Price €24.79
Pink 3D-pen for ABS / PLA filaments Pink 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Pink 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: pink, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0154 ✗ Out-of-Stock Regular price €19.83 -€2.00 Price €17.83
Blue 3D-Pen for ABS/PLA Filaments - This 3D pen is suitable for ABS or PLA filaments of 1,75m- Includes an LCD screen that allows you to read the temperature, speed and filament control- It also comes with button controls to control the extrusion speed- You can use this powerful 3D pen to draw, draw or trace objects on paper Blue 3D-Pen for ABS/PLA Filaments features: - Input voltage: 12V- Current consumption: 2A- Diameter of the nozzle: 0.7mm- Heating temperature: 160-230 degrees adjustable- Ballpoint pen color: blue- Filaments of random colors- Includes PLA filament and power 100-240 VAC / 50 Hz - 12VDC / 2A- Recommended for adults and children 8 years and older Code I0155 ✗ Out-of-Stock Regular price €19.83 -€2.00 Price €17.83
ABS 20x Colors Filament 1.75mm 5m ABS 20x Colors Filament 1.75mm 5m features:- Ideal for 3D printing pen- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0300 ✗ Out-of-Stock Price €9.09
PLA Set of 20 colors Filament 1.75mm x 5m PLA Set of 20 colors Filament 1.75mm x 5m features:- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0301 ✗ Out-of-Stock Price €9.67
Purple 3D-pen for ABS / PLA filaments Purple 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Purple 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: purple, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0153 ✗ Out-of-Stock Regular price €19.83 -€2.00 Price €17.83
Blue 3D Pen and PLA Set of 20 colors Filament 1.75mm x 5m Blue 3D Pen and PLA Set of 20 colors Filament 1.75mm x 5m features:- White- Gray- Yellow- Orange- Red- Blue- Green- Black- Pink- Purple- Luminescent green- Gold- Silver- Transparent purple- Transparent blue- Transparent orange- 4 random colors Code I0303 ✗ Out-of-Stock Price €24.79
Pink 3D-pen for ABS / PLA filaments Pink 3D-pen for ABS / PLA filaments features: This 3D pen is suitable for 1.75m ABS or PLA filaments. It includes an LCD screen that allows you to read the temperature, speed and filament. It also comes with button controls to control the extrusion speed. You can use this powerful 3D pen to draw, draw or trace objects on the paper. Pink 3D-pen for ABS / PLA filaments features: - Input voltage: 12V, - Current consumption: 2A, - Nozzle diameter: 0.7mm - Heating temperature: 160-230 degrees adjustable, - Pen color: pink, - Random color filaments, - Includes PLA filament and 100-240 VAC / 50 Hz power - 12VDC / 2A, - Recommended for adults and children 8 years and older. Code I0154 ✗ Out-of-Stock Regular price €19.83 -€2.00 Price €17.83
Blue 3D-Pen for ABS/PLA Filaments - This 3D pen is suitable for ABS or PLA filaments of 1,75m- Includes an LCD screen that allows you to read the temperature, speed and filament control- It also comes with button controls to control the extrusion speed- You can use this powerful 3D pen to draw, draw or trace objects on paper Blue 3D-Pen for ABS/PLA Filaments features: - Input voltage: 12V- Current consumption: 2A- Diameter of the nozzle: 0.7mm- Heating temperature: 160-230 degrees adjustable- Ballpoint pen color: blue- Filaments of random colors- Includes PLA filament and power 100-240 VAC / 50 Hz - 12VDC / 2A- Recommended for adults and children 8 years and older Code I0155 ✗ Out-of-Stock Regular price €19.83 -€2.00 Price €17.83