W5100 Mini Network Module Ethernet Shield Arduino compatible W5100 Mini Network Module Ethernet Shield Arduino features: - Shield Ethernet for Arduino and compatible boards based on the Wiznet W5100 chip - Provides a simple mode to connect your module to the local network and the internet - Compatible with the official Arduino Ethernet library - With this shield you can build a web server - It can be used as a server or as a client - Controller: Wiznet W5100 - Supports TCP and UDP protocols - Supports up to 4 simultaneous connections - Compatible with all versions of Arduino: UNO, mega 1280/2560 - Dimensions: 50 x 25x 25mm Code W0074 Available Price €10.90
3x Heat Sink Aluminium Adhesive A4988 DRV8825 3x Heat Sink Aluminium Adhesive A4988 DRV8825 features: - Package includes: 3x Heatsink with adhesive - Ideal for DRV8825, A4988 etc - Dimensions: 9 x 9 x 5mm Code I0046 Available Price €0.35
Peltier Ceramic Cell TEC1-12702 12V 2A Characteristic: - Max Power: 24w - Voltage: 12v - Max Current: 2A - Cooling capacity 17.7W - Temperature variation: Code M0051 Available Price €6.99
433MHz RF Wireless Receiver + Transmitter Transmitter and receiver kit for radio control and data transmission, compatible with Arduino. 433MHz RF Wireless Receiver + Transmitter features: Specifications of the emitter module: - Power supply: 3V ~ 12V - Working intensity: max = 40mA (at 12V), min = 9mA (at 3V) - AM ASK / OOK modulation - SAW filter - Working frequency: 315MHz-433.92MHz - Transmission power: 25mW (315MHz at 12V) - Range: 20 to 200 meters (different voltages can give different results) - Transfer speed: 4 kB / S - Dimensions: 19x 19x 7mm Receiver module specifications: - Power supply: 5.0VDC + 0.5V - Work intensity: 5.5mA (at 5.0VDC) - Work frequency: 315MHz-433.92MHz - Receiver sensitivity: -100dBm Code W0010 Available Price €1.09
Bluetooth Wireless Module 4.0 CC2541 Android IOS HM-10 BLE Arduino Android IOS Master Slave Bluetooth Modul for Arduino iOS Android. The HM10 supports Bluetooth 4.0 (low energy) and therefore has a relatively low power consumption. Code W0008 Available Price €17.89
5x Power LED Aluminum Heat Sink 1W 3W 5x Power LED Aluminum Heat Sink 1W 3W features: - Outside diameter: 36mm- Height: 15mm- Quantity: 5 units Code P0037 Available Price €1.48
3x Power LED Aluminum Heat Sink 3W 5W 3x Power LED Aluminum Heat Sink 3W 5W features: - Outside diameter: 36mm- Height: 30mm- Quantity: 3 units Code P0038 Available Price €1.95
ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi NodeMcu module based on ESP8266 controller and programming in Lua language NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC ESP8266-12E is an improved version of ESP8266-12 It works as a standard WiFi 802.11 b / g / n 2.4 GHz USB Communication - CP2102 Chip Characteristic: ESP 12E ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi features: - Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V) - Supported protocols: 802.11 b / g / n - Network support: 2.4 GHz - Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point - Integrated TCP / IP stack - PLL, regulators and integrated power management units - Output power: 0 , 15 (W); + 19.5dBm in 802.11b mode Code W0014 Available Price €4.95
Fan 12V 2x Cables PC CPU case Fan 12V 2x Cables PC CPU case features: - Voltage: 12V - Consumption: 0.28A - Screw diameter: 3.5mm - Life time useful: 30,000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 24.5cm - Dimensions: 80mm x 80mm x 15mm Code I0055 Available Regular price €3.49 -€0.90 Price €2.59
NRF24L01 Adapter + Socket Wireless Transceiver 2.4GHz NRF24L01 Adapter + Socket Wireless Transceiver 2.4GHz features: - The NRF24L01 + module is powered with 3.3V- This adapter module includes a 3.3V voltage regulator- You can connect the NRF24L01 module on it at 5V voltage- Dimensions of PCB: 25x 18mm- Quantity: Adapter 1 unit Code W0023 Available Price €1.49
NFC Card Type 2 NTAG215 RFID Dual Label 13.56 MHz NFC Card Type 2 NTAG215 RFID Dual Label 13.56 MHz features: - Standard: NFC Forum Type2 Tag Ntag215 - Protocol: ISO14443A - Memory: 540B (504B) EEPROM - Operating frequency: 13.56MHZ - Reading distance: 0-10CM - Communication speed: 106Kboud - Working temperature: -20ºC to 70ºC - Number of uses 100,000 times - Data retention: 10 years - Material: PVC - Dimensions 86 x 54 x 0.84 mm Code M0052 Available Price €1.99
Fan 12V 2 wire Reprap 3D printer Characteristic: - Voltage: 12V - Consumption: 120mA - Speed: 4800rpm -5600rpm - Noise level: 25dB ± 10% - Screw diameter: 4.5mm - Life time: 40000 hours - Operating temperature: -10 ° C to 65 ° C - Length Cable: 28cm - Dimensions: 40mm x 40mm x 20mm - For cooling MK8 hotels Code I0025 Available Regular price €2.54 -€0.55 Price €1.99
Fan 12V 2x 3D Printer Cables Fan 12V 2x 3D Printer Cables features: - Voltage: 12V - Consumption: 65mA - Speed: 3800rpm -5600rpm - Noise level: 25dB ± 10% - Screw diameter: 4.5mm - Service Life Time: 35000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 11cm - Dimensions: 40mm x 40mm x 10mm Code I0026 Available Price €1.59
ENC28J60 Ethernet LAN Network Module Mini AVR LPC STM3 The network module communicates with the Arduino type board through the SPI protocol ideal for projects with ARDUINO, PIC, AVR, STM32. ENC28J60 Ethernet LAN Network Module Mini AVR LPC STM3 features: - Chip ENC28J60 Microchip- Module: 10Base-T- 3.3V power- SPI interface- 25Mhz speed- LED status LED- Hanrun network transformer- Network Interface board HR911105A- Operating temperature: -40ºC to + 85ºC- Dimensions: 51 x 19 x 16 mm Code W0006 Available Price €9.90
Mini Fan 12V 2x 3D Printer Cables Mini Fan 12V 2x 3D Printer Cables features: - Voltage: 12V - Consumption: 80mA - Speed: 2600rpm +/- 10% - Temperature operating: -10 ° C to 65 ° C - Cable length: 12cm - Dimensions: 25mmx 25mm x 10mm Code I0027 Available Price €1.59
NRF24L01 + Wireless Transceiver Module 2.4GHz It is ultra compact and very low consumption. It works at 2.4GHz frequencies (free frequency) and is ideal for telemetry projects, robots, peripheral control, video game control applications, remote temperature sensors, pressure, alarms, etc ... NRF24L01 + Wireless Transceiver Module 2.4GHz features: - Based on chip NRF24L01 + Ultra Low Power- Free band: 2.4GHz ISM- Speed: 250kbps, 1Mbps, 2Mbps- Working current - reception: 13 mA- Transmission: 11 mA (900nA -deep sleep mode)- Receiving sensitivity: -94dB 250kbps- Coverage in closed spaces: 15m / 30m- SPI interface- Input voltage: 1.9V- 3.6V- Input / output port voltage: 0V-3.3V / 5V- Coverage in open areas: 100m approx.- Clock frequency: 16MHz Code W0005 Available Price €1.59
NRF24L01 Shield Atmega48 Wireless Module SPI To IIC I2C TWI Interface NRF24L01 Shield Atmega48 Wireless Module SPI To IIC I2C TWI Interface features: - Operating voltage: 5V- Wait time of the module receives the data: more than 2S- The waiting time of the module sends data: more than 300- Transfer speed: 50 Byte / S (theoretical value)- I2C / TWI address: 0 x 47 (decimal 35)- Address NRF24L01: 0 x 34, 0 x 43, 0 x 10, 0 x 10, 0 x 01 (from lowest to highest)- Size: 44 x 23 mm Code W0066 Available Price €4.46
Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY Kit Peltier Cell 12V TEC1 12706 Fan Thermal Paste DIY features: - Mounting kit - Ceramic Peltier Cell 12V TEC1-12706 - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm - Color black or silver - Thermal insulation 70x65mm for cell - Fan 12V 90x90x25mm with grille - Thermal paste 0.5g - Screws - Peltier effect cell model TEC1-12706, 12v, max. 60w and 6A, with a temperature difference between their faces of up to 67ºC - Max Power: 60w - Voltage: 12v - Max Voltage: 15.2v - Max Current: 6A - Temperature Variation: Code M0059 Available Price €18.79
Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA features:- Standard: GSM / GPRS / 3G- Frequency range: 800 ~ 1900MHz- Interface: SMA male- Gain: 7dBi- Length of the antenna: 20cm- V.S.W.R .: <1.5- Impedance (ohm): 50- Maximum input power (W): 100W- Operating temperature: -40ºC ~ + 70ºC Code W0072 Available Price €6.95
3x LED Base Plate Heat Sink 1W 3W 5W 3x LED Base Plate Heat Sink 1W 3W 5W features: - Outside diameter: 20mm- Quantity: 3 units Code P0039 Available Price €0.50
Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM features:- The cable is used for system transmissions2.4 [GHz] (WiFi, LTE, 3G, GPS)- It is also suitable for the lower frequencies (CB, GSM, PMR)- It has less loss than the type RG-58 cable- Type of coaxial cable- H155 cable series- 50Ω wave impedance- Stranded core structure- Core type Cu- Structure of the laminated Al-PET shield, tinned copper braid- PVC external insulation material- Gray insulation color- Outer cable dimensions Ø5.4mm- Operating temperature -15 ... 70 ° C- Resistance to weather conditions- Installation of 2.4 GHz antenna cable, outdoor- Attenuations [dB / 100m]:* 50 [MHz] - 6.5* 100 [MHz] - 9.3 Code K0056 Available Price €2.80
Thermo Silicone Paste Cleaner Thermo Silicone Paste Cleaner features: This product is safe and easy to use with a pleasant aroma of citrus.It is used to eliminate old conductive pastes from heat, worn out. How to use: - It is recommended to remove the most amount of paste consumed a small amount of liquid applied to the fabric applied to the surface that is cleaned- Wait 1-2 minutes- Clean with a cloth Code Q0045 Last items in stock Price €2.95
Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS features: - Standard: GPS 1575.42 MHz- Voltage: 3 ~ 5V- Current: max 10mA- Interface: SMA male- Polarization: circular (right)- LNA gain (without cable): 28dB typ- Noise figure: 1.5dB typ- Operating temperature: -40'C ~ + 85'C- Cable length 150cm- Dimensions: 49 x38 x16 mm Code W0073 Available Price €7.59
Aluminium Adhesive Heatsink pack 3pcs Kit 3x Aluminium Dissipative Adhesive features: - For Raspberry Pi 2 and Pi 3, B and B + - Heatsink includes thermal sticker - 1x aluminum heatsink for the microprocessor - Dimension: 14x14x5mm - 2x aluminum heatsink for the USB / Ethernet chip and for the voltage regulator - Dimension 9x9x4mm - Quantity: 3 units Code RA005 Available Price €1.29
NRF24L01 Adapter + Wireless Transceiver 2.4GHz Socket Arduino compatible NRF24L01 Adapter + Wireless Transceiver 2.4GHz Socket Arduino features: - The NRF24L01 + module is powered with 3.3V- This adapter module includes a 3.3V voltage regulator- You can connect the NRF24L01 module on it at 5V voltage- Dimensions of PCB: 25x 18mm- Quantity: Adapter 1 unit Code W0065 ✗ Out-of-Stock Price €1.49
Copper Adhesive Dissipator For Raspberry Pi 2 and Pi 3, B and B +. The heatsink includes a thermal sticker. Characteristic: - Dimensions: 13x12x5mm - Quantity: 1 unit Code RA006 Available Price €1.49
Fan 12V 2x Cable 50x50x15 3D Printer Reprap Fan 12V 2x Cable 50x50x15 3D Printer Reprap features: - Voltage: 12V - Speed: 7000rpm ± 10% - Screw diameter: 4.5mm - Time lifespan: 50,000 hours - Operating temperature: -10 ° C to 70 ° C - Cable length: 28cm - Dimensions: 50mm x 50mm x 10mm Code I0120 Available Price €2.09
Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino compatible Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino features: - Can be connected with the ESP8266 module with ipex- Standard: 2.4GHz- Frequency range: 2400 ~ 2500MHz- Interface: SMA- Gain: 3dBi- Length of the antenna: 10cm- V.S.W.R.: <1.5- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40'C ~ + 70'C Code W0070 Available Price €4.50
Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm Can be connected with the ESP8266 module with IPEXCompatible with Hirose U.FL and IPEX MHF1 Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm features: - Frequency range: 0 ~ 6000MHz- Interface: SMA female connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1,13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40ºC ~ + 70ºC Code W0071 Available Price €2.19
XM-15B Bluetooth Serial Port Module Master Slave Arduino compatible HC-05/06 XM-15B Bluetooth Serial Port Module Master Slave Compatible Arduino HC-05/06 features: * Power 3.0V -6V* 3.3V / 5V logic levels* Bluetooth version V2.1 + EDR* Frequency: 2.4GHz ISM band* Reach approx. 30m* Security: Authentication and encryption* Supports AT commands for configuration through a serial port* Working temperature: -20 ºC to +75 ºC* Working current - 50 mA* PCB dimension: 35 x 19m -Using the conventional Bluetooth CSR chip, the protocol standard Bluetooth V2.1 + EDR, passes the Bluetooth BQB certification-Fast start, only 0.3 seconds to complete the initialization of the complete module (including the Bluetooth protocol stack)- Built-in hardware protector, never hangs Code W0022 Available Price €7.49
Aluminum Heatsink with Adhesive LM2596 XL4015 Aluminum Heatsink with Adhesive LM2596 XL4015 features: - Ideal for LM2596, XL4015, etc...- Dimensions: 11x11x5.5mm Code A0025 Available Price €0.59
DIY Paste Dissipative Fan Kit for Ceramic Peltier Cell TEC1-12706 Characteristic: - Heatsink 12x10x25mm (hot side) - Heatsink 60x40x25mm (black or silver color) - 70x65mm thermal insulation for cell - Fan with grid 12V 90x90x25mm - Thermal paste 0.5g - Screws - Kit does not include: Peltier cell Ceramic TEC1-12706 12V Code M0060 Available Price €15.99
ESP8266 WiFi Motor Drive L293D Expansion Shield Board ESP12E NodeMcu Allows control: - Up to 2 bidirectional current motors- Or 1 stepper motor Shield is compatible with NodeMcu ESP8266 CP2102 WIFI Development Board ESP8266 WiFi Motor Drive L293D Expansion Shield Board ESP12E NodeMcu features: - Minimum operating voltage: 4.5 V- Maximum operating voltage: 36 V- Maximum current: ± 1.2 A- Logic voltage: - 2.3V <= HIV <= VIN (high) - 0.3V <= VIL <= 1.5V (low)- Controller L293D- Measures: 58x42 mm ESP12 port control kit: - D1, D3 - motorA- D2, D4 - motorB Code W0015 Available Price €3.49
Fan Black 12V 2x PC CPU Cables Characteristic: - Voltage: 12V - Consumption: 0.3A - Screw diameter: 4mm - Product duration in operation: 30000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 14.5cm - Dimensions: 92mm x 92mm x 25mm Code I0054 Available Price €2.89
Peltier Ceramic Cell TEC1 12706 12V 60W Peltier Ceramic Cell TEC1 12706 12V 60W features: - Max Power: 60w - Voltage: 12v - Max Voltage: 15,2v - Max Current: 6A - Temperature Variation: - Peltier effect cell model TEC1-12706, 12v, max 60w and 6A, with a temperature difference between their faces of up to 67ºC Code M0055 Available Price €3.95
ESP8266 5V WiFi Relay Module AP Remote Control + STA You can easily control any device over the Internet through your phone, computer, etc. The module can handle 5 users at the same time, it can work in two modes: STA (client) and AP (access point). In AP mode, the module is connected via WIFI directly to your phone or computer (in open field can be up to 300 meters). In STA mode, the relay module is connected to the access point (router) that supplies the network. Wi-Fi in the room where the relays are located. In this case, the range mainly depends on the power of the access point antennas (routers). You should not turn off after the configuration is completed, as some of the parameters of the WIFI module cannot be saved when power is cut off. Code W0067 Available Price €9.49
Thermally Conductive Silicone Paste H 100g Thermally Conductive Silicone Paste H facilitates the transfer of calories between the electronic components and the radiator.It is necessary for the correct operation of any type of temperature sensors. Code Q0038 Last items in stock Price €5.49
Wemos D1 Mini ESP8266 ESP12E CH340 WiFi Wireless Development Mini ESP8266 ESP12E CH340 WiFi Development NodeMcu module based on ESP8266 controller and programming in Lua language NodeMcu it is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC It works as a standard WiFi 802.11 b / g / n 2.4 GHz Wemos D1 Mini ESP8266 ESP12E CH340 WiFi Wireless Development features: - Compatible with Arduino, programming with the Arduino IDE - Power supply voltage: 5V - LOGICAL LEVELS: 3.3V - 11 input / output pins - 1 ADC (input: 0-3.3V) - Supported protocols: 802.11 b / g / n - Network support: 2.4 GHz - Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point - Integrated TCP / IP stack - PLL, regulators and power management units Integrated Code W0061 Available Price €3.49
Thermally Conductive Silicone Paste H 7g Thermally Conductive Silicone Paste H facilitates the transfer of heat between the electronic components and the radiator. It is necessary for the correct operation of any type of temperature sensors. Global coefficient of heat transfer at 0-150 ° C: 0.88 W / m K Code Q0051 Available Price €1.45
NodeMcu V3 Lua ESP8266 ESP12E CH340 WiFi Wireless Module Development Board NodeMcu module based on ESP8266 controller and programming in Lua language. NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC. ESP8266-12E is an improved version of ESP8266-12. It works as a standard WiFi 802.11 b / g / n 2.4 GHz. USB communication - the CH340 chip. Characteristics of ESP 12E: - Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V) - Supported protocols: 802.11 b / g / n - Network support: 2.4 GHz - Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point - TCP Stack / Integrated IP - PLLs, Regulators and Integrated Power Management Units - Output Power: 0.15 (W); + 19.5dBm in 802.11b mode Code W0013 Available Price €4.49
Fan 12V 2x Cables 3D Reprap Printer Fan 12V 2x Cables 3D Reprap Printer features: - For Prusa RepRap 3D Printer - Voltage: 12V - Consumption: 90mA - Speed: 7000rpm ± 10% - Noise level: 25dB ± 10% - Screw diameter: 3.5mm - Service Life Time: 35000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 28cm - Dimensions: 30mm x 30mm x 10mm Code I0045 Available Price €1.59
NRF24L01 + Wireless Antenna Transceiver 2.4 GHz 1Km PA LNA - This module includes PA preamplifier and LNA (Low-noise amplifier)- Comes with the SMA antenna for 2.4GHz (2dB)- Outdoor - transmission up to 250kbps and a distance of up to 1 kilometer- Works at 2.4GHz frequencies (free frequency) and is ideal for telemetry projects, robots, peripherals control, video game control applications, remote temperature sensors, pressure, alarms, etc ... NRF24L01 + Wireless Antenna Transceiver 2.4 GHz 1Km PA LNA features: * Based on chip NRF24L01 +* Free band: 2.4GHz ISM* Speed: 250kbps, 1Mbps, 2Mbps* Work current- Reception: 45 mA- Transmission: 115 mA (4.2uA -sleep mode)* Receiving sensitivity:-104dB 250kbps- 95dB 1Mbps- 92dB 2Mbps* SPI interface Code W0063 Available Regular price €6.95 -€1.50 Price €5.45
Aluminum Heat Sink 10x2.5cm Power LED 3W 5W The aluminium heatsink for 3W to 5W LEDs. It is 10cm long, 2.5cm wide, 1.0cm high. Code P0049 Available Price €3.49
Wireless Module Arduino compatible HC-05 HC05 Bluetooth The bluetooth HC-05 module is one of the best options for projects where you need wireless communications. The transceiver module (transmission / reception) allows bluetooth wireless connections as master or slave, works transparently as if making a wired RS-232 TTL serial connection. Arduino Wireless Module HC-05 HC05 Bluetooth features: - CSR BC417 Chipset - Power: 3.3. - Bluetooth version V2.0 + EDR - Frequency: 2.4GHz ISM band - Modulation: GFSK - Approximate range: 10m - Security: Authentication and encryption - Speed- & gt; Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps - Supports AT commands for configuration through a serial port temperature: -20 ºC to +75 ºC Code W0019 ✗ Out-of-Stock Price €8.90
Aluminum Heat Sink 15x2cm LED 1W-3W Aluminum Heat Sink 15cm 2cm LED 1W 3W features:Aluminum heatsink for LED 1W-3W, Length: 15cm, Width: 2.0cm, Height: 0.6cm. Code P0051 Available Price €2.79
Transceiver 1km SI4432 433MHz Wireless Transmitter Telemetry Transceiver 1km SI4432 433MHz Wireless Transmitter Telemetry features: - Transceiver based on the SI4432 Silicon Labs chip - Ultrathin ultra small (16.5 × 17 mm) - Good harmonics: easy for FCC / CE certification - Penetration capacity (measured through 8 floors) - Frequency range: 433.92MHz - Sensitivity down to -121 dBm - Maximum output power: 20dBm - Data transfer rate: 0.123-256 kbps - FSK, GFSK and OOK modulation - Power supply: 1.8-3.6 V - Ultra low power shutdown mode - Digital indication of received signal strength (RSSI) - Time to wake up - Bidirectional antenna switch control and automatic adjustment - Configurable packet structure - Preamble detection Code W0075 Available Price €4.99
1.5km radius SI4432 433MHz RF Telemetry Transceiver based on the SI4432 Silicon Labs chip Industry standard model Capacitive components manufactured by Murata with 10ppm high precision glass Outdoors - a distance of up to 1.5 km 1.5km radius SI4432 433MHz RF Telemetry features:- Supply voltage: 1.8 ~ 3.6VDC (Note: a voltage higher than 3.6 V will cause permanent damage to the module) - Communication level: 0.7VDC ~ 3.6V (VCC refers to the module supply voltage) - Working frequency: 425M ~ 525MHz (via software setting, the module uses 30M glass) - Measured distance: 1500m (clear and open, maximum power, height 1.5m, air speed 1k) - Transmission power: up to 20dBm (about 100mW) - Air rate: 0.123k ~ 256Kbps (software adjustable, low airspeed recommended) Code W0080 ✗ Out-of-Stock Price €4.99
Heat Sink for NanoPi NEO Plus2 Includes Screws The perfect heatsink with aluminium adhesive for NanoPi Neo Plus module with screws Code B0050 Available Price €5.00
Kit 2x Adhesive Dissipaters of Covers and Blue Aluminium For Raspberry Pi 2 and Pi 3, B and B +. Each heatsink includes thermal sticker. Characteristic: 1 cover sink: - Dimensions: 13x12x5mm 1 blue aluminum sink: - Dimensions: 9x9x12mm Code RA021 Available Price €2.49
Ethernet Shield W5100 Web Server Shield Ethernet for Arduino boards and compatible based on the Wiznet W5100 chip. Provides an easy way to connect your module to the local network now internet. Compatible with the official Arduino Ethernet library. With this shield you can build a web server. It can be used as a server or as a client. It has support for a microSD that can be used to store files for distribution on the network. Ethernet Shield W5100 Web Server features: - Controller: Wiznet W5100 - Supports protocols TCP and UDP - Supports up to 4 simultaneous connections - Compatible with all Arduino versions: UNO, mega 1280/2560 - Dimensions: 74 x 54 x 25mm Code W0007 Available Price €21.95
Kit 2x Blue Aluminium and Gold flat metal heatsinks For Raspberry Pi 2 and Pi 3, B and B +. Each heatsink includes thermal sticker. Kit 2x Blue Aluminium and Gold flat metal heatsinks features: 1 blue aluminum heatsink: - Dimensions: 9x9x12mm 1 flat metal sink gold color: - Dimensions: 12x12x1mm Code RA022 Available Price €1.49
2km radius SI4463 433MHz RF Telemetry Arduino compatible A compact, low-power Bottom Effect System Transceiver. Transceiver based on the SI4463 Silicon Labs chip. Industry standard model. In full power operating conditions, open the communication distance up to 2000 km. Much more than the SI4432. Si4463 is a high performance 433 MHz transceiver. and low current consumption of the EZRadioPRO series, which includes a complete transmitter and receiver. Higher sensitivity -126dBm. The maximum output power of + 20dBm, support (G) FSK, 4 (G) FSK, (G) MSK, OOK and ASK modulation. The data rate in the range of 100bps ~ 1Mbps. Operating voltage of 1.8V ~ 3.6V. FCC approval / IC. 2km radius SI4463 433MHz RF Arduino Telemetry features: - Supply voltage: 1.8 ~ 3.6VDC Code W0077 Available Price €7.24
Kit 3x Blue, Green and Gold colored flat metal aluminum heatsinks For Raspberry Pi 2 and Pi 3, B and B +. Each heatsink includes a thermal sticker. Kit 3x Blue, Green and Gold colored flat metal aluminum heatsinks features: 1 blue aluminum heatsink: - Dimensions: 9x9x12mm 1 flat gold metal sink: - Dimensions: 12x12x1mm 1 green aluminum sink: - Dimensions: 19x19x8mm Code RA023 Available Price €1.99
SIM808 GPRS GSM GPS Bluetooth SIM Quadband SIM808 GPRS GSM GPS Bluetooth SIM Quadband features: - SIM card SIM808 GPRS GSM GPS Bluetooth SIM - Supply voltage range: 3.4-4.4V - Four bands GSM 850/900/1800 / 1900MHz - GPRS multi-slot class 12/10 - GPRS mobile station class B - According to GSM phase 2/2 + - Class 4 (2 W at 850/900 MHz) - Class 1 (1W at 1800 / 1900MHz) - Control by AT commands (3GPP TS 27.007.27.005 and enhanced AT Commands from SIM Com) - Operating temperature: -40 to + 85 ° C - PCB dimension: 38x38mm - GPS sensitivity - Tracking: -165dBm Cold start Sensitivity - Cold start: -147dBm - Time to first solution - Cold start: 30 s - Start to warm up: 28s - Already hot: 1s - Accuracy Code W0069 Available Regular price €19.89 -€3.00 Price €16.89
Transistor heat sink with TO-220/TIP120 box Heat sink for transistors with TO-220 / TIP120 box Transistor heat sink with TO-220/TIP120 box features: Aluminum heatsink: - Dimensions: 25x15x10mm Code T0069 Available Price €0.45
Shield Li-Po Battery for WeMos D1 Mini ESP826 Shield Li-Po Battery for WeMos D1 Mini ESP826 features: Connect the lithium battery to this shield to supply power for the entire D1 mini system. When the battery is depleted, it is not necessary disconnect the battery, just use the usb port to charge directly. - Charging voltage: max: 10V, recommend: 5V - Charging current: max: 1A - Voltage lithium battery: 3.3-4.2V - Boost power supply: 5V (max: 1 A) - LED color: red for charging, green for fully charged - Ports: * Micro USB - Charging port (normal 5V) * Connect to the lithium battery (normal 3.3-4.2V) * J1 - setting the maximum charging current, 0.5 A or 1A Code W0076 Available Regular price €4.76 -€1.00 Price €3.76
DC 12V CPU heatsink for high power 50W LED diodes High power 50W LED suitable for KTV light, projection lamps.Ideal for DIY projects. DC 12V CPU heatsink for high power 50W LED diodes features: - 35mm thick heat sink,- DC 12V Ø95 x 25mm fan,- 4 screws to fix the base carrying the LED diodes,- Step between screws: 71.5mm,- Includes thermal grease. Code P0138 Available Price €17.99
SIM800L GPRS GSM SIM Board Quadband SIM800L GPRS GSM SIM Board Quadband features: Package includes: - SIM800L module, - 2x pin headers, - Spring antenna, - 3G PCB antenna - 15cm cable. - Supported SIM format: Micro SIM. Code W0017 Available Price €6.49
Fan 5V 2x Cable 50x50x15mm Fan 5V 2x Cable 50x50x15mm features: - Voltage: 5V - Speed: 7000rpm ± 10% - Screw diameter: 4.5mm - Time lifespan: 50,000 hours - Operating temperature: -10 ° C to 70 ° C - Cable length: 28cm - Dimensions: 50mm x 50mm x 15mm Code I0169 Available Price €2.09
Wireless Module Arduino compatible HC-06 HC06 The Bluetooth HC-06 module is one of the best options for projects where you need wireless communications. Arduino Wireless Module HC-06 HC06 features: - CSR BC417 Chipset - Power: 3.3V - Bluetooth version V2.0 + EDR - Frequency: 2.4GHz band ISM - Modulation: GFSK - Range approx. 10m - Security: Authentication and encryption. - Speed- & gt; Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps - Supports AT commands for configuration through a serial port - Working temperature: -20 ºC to +75 ºC - Working current - pairing: 80 mA - Transmission: 8mA - Size: 28 x 12mm Code W0018 Available Price €9.50