40x Male to male cables 20cm Characteristic: -Length: 20cm -Quantity: 40 cables -Mono Dupont connectors on both ends -Compatible with 2.54mm female connectors -High quality and good working condition -Easy to install and use Code K0006 Available Price €2.49
Anti-Static Tweezers ESD 115mm Anti-Static Tweezers ESD 115mm features: - Anti-static tweezers, short straight tip, matt black- Length: 115mm- Width: 9mm- ESD pliers- High precision, without producing dust, resistant to high temperatures Code H0093 Available Price €1.69
Boost Buck Step Up-Down Automatic Converter Descripción:This is a powerful, efficient step-up (boost) and step-down (buck) switching voltage converter. It will automatically change between boosting and bucking to maintain a stable output voltage, regardless of the input.The output is set with a multi-turn potentiometer.Boost Buck Step Up-Down Automatic Converter features:- IC Chip: LM2577S-ADJ and LM2596S-ADJ - Module Properties: non-isolated Boost Buck constant current, constant voltage module (CC CV) charging module- Scope: High-power constant current LED driver.- Battery charger (including ferroelectric), 4V, 6V, 12V, 14V, 24V battery charging, nickel-cadmium nickel-metal hydride batteries (battery) charger, solar panels, wind generators. Code A0017 Available Price €9.49
Bluetooth Transceiver Module HC-06 Wireless HC-06 Bluetooth transceiver module with base.The bluetooth module HC-06 is one of the best options for projects, in which you need wireless communications.The transceiver module allows bluetooth wireless connections as a slave, ready to listen for connection requests. Bluetooth Transceiver Module HC-06 Wireless features: - Chipset CSR BC417- 3.5V - 5V power- Bluetooth version V2.0 + EDR- Frequency: 2.4GHz ISM band- Modulation: GFSK- Reach approx. 10m- Security: Authentication and encryption.- Speed-> Asynchronous: 2.1Mbps (Max) / 160 kbps; Synchronous: 1Mbps / 1Mbps- Supports AT commands for configuration through a serial port- Working temperature: -20ºC to + 75ºC- Working current - pairing: 80 mA Code W0009 ✗ Out-of-Stock Price €5.39
Adjustable DC Module LM2596 1,25-32V 3A Step Down 3A DC Converter 1,25-32V Adjustable LM2596 Step Down Module features: - Based on the LM2596S-ADJ regulator - Rectification: Asynchronous - Output Voltage: 1.25v - 32v DC (adjustable) - Voltage of Input: 3.2v - 35v DC - Max Output Current: 3A (with heat sink) - Ripple at output voltage: 30mV - Frequency: 150KHz - Max Conversion Efficiency: 92% - Load Regulation: ± 0.5% - Voltage Regulation: ± 2.5% - Operating Temperature: -40ºC to + 85ºC - Measurements 43x 21x 14 mm Code A0004 Available Price €1.99
Arduino compatible UNO R3 board - It has an Atmega328P chip running at 16Mhz with a factory loaded bootloader - The Uno R3 module has all the connectors than the Arduino Uno R3 and is compatible with all Arduino shields Arduino compatible UNO R3 board features: - Includes USB Cable - ATmega328P 16MHz chip with external quartz crystal - Microprocessor: ATmega328 - Operating voltage: 5V - Input voltage (recommended): 7-12V - Input voltage (limits): 6-20V - Clock speed: 16 MHz - Digital I / O Pins: 14 - Analog input pins: 6 - DC current per I / O Pin: 40 mA - DC Current per Pin 3.3V: 50 mA - Flash32 KB of which 0.5 KB are used by the bootloader - Atmega328 - SRAM 2 KB - Atmega328 Code B0009 Available Price €9.95
40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix 4 RGB LED panel with digital control to be connected in cascade to complete the reception and decoding of the data.The light emitted is very powerful and millions of colors can be generated thanks to the RGB device. 40 LED RGB Digital Panel Adafruit Neopixel with Connectors 5050 Matrix features: - 40 individually addressable RGB LEDs (NeoPixels based on SK6812 or WS2812B) arranged in a 5 × 8 matrix- 24-bit color control (8-bit PWM per channel); 16.8 million colors per pixel- The digital control interface of a single cable requires only one Arduino pin (the default pin can be customized)- Operating voltage range: 4 V to 6 V (connected to the 5 V Arduino rail by default) Code P0133 Available Price €9.95
Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth ESP32 processor development board with WiFi and Bluetooth (BLE) compatible with Arduino Uno shields. It is much faster than the ESP8266 processor (NodeMCU and the like) . Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth features: Power: 5-12VDC WiFi 802.11 b / g / n / e / i (802.11n up to 150 Mbps) Bluetooth v4.2 BR / EDR and BLE. Compatible with Arduino Uno shields. 6 Analog input. 20 digital inputs / outputs (3.3V) (with PWM functions, interrupt). UART, SPI, I2C communication. Size: 68Ã — 53 mm Micro USB connection. 4Mbytes Flash Memory 520Kb Clock: 240Mhz (a core dedicated to WiFi processing) Temperature: -40C + 85C Current: 250mA (max) Current in saving mode: 0.15mA Operating current: 20mA (without WiFi) Useful links for Arduino / Raspberry programming and projects with Arduino / Code W0094 Available Price €9.95
Antenna GSM GPRS 3G IPEX Antenna GSM GPRS 3G IPEX features: - PCB Antenna 2dBi Ipex U.fl 50 Ohm- Standard: 2G 3G IPEX Antenna- Frequency range: 700-960 MHz and ‰¤ 5; 1710-1800 MHz; 1800-1990 MHz- Interface: IPEX- Gain: 2dBi +/- 0.7dBi- Length of the antenna: 10cm- V.S.W.R.: <3.0 @ 780 ~ 960 MHz & <= 3.5 @ 1710 ~ 2170 MHz- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Operating temperature: -40'C ~ + 65'C Code W0082 Available Price €1.85
Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm Can be connected with the ESP8266 module with IPEXCompatible with Hirose U.FL and IPEX MHF1 Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm features: - Frequency range: 0 ~ 6000MHz- Interface: SMA female connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1,13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40ºC ~ + 70ºC Code W0071 Available Price €2.19
Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS features: - Standard: GPS 1575.42 MHz- Voltage: 3 ~ 5V- Current: max 10mA- Interface: SMA male- Polarization: circular (right)- LNA gain (without cable): 28dB typ- Noise figure: 1.5dB typ- Operating temperature: -40'C ~ + 85'C- Cable length 150cm- Dimensions: 49 x38 x16 mm Code W0073 Available Price €7.59
Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino compatible The 19.5cm antenna can be connected to the ESP8266 module with ipex. It works on LoRa 433/868/915 MHz frequencies with SMA interface. Code W0109 Available Price €3.95
Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM features:- The cable is used for system transmissions2.4 [GHz] (WiFi, LTE, 3G, GPS)- It is also suitable for the lower frequencies (CB, GSM, PMR)- It has less loss than the type RG-58 cable- Type of coaxial cable- H155 cable series- 50Ω wave impedance- Stranded core structure- Core type Cu- Structure of the laminated Al-PET shield, tinned copper braid- PVC external insulation material- Gray insulation color- Outer cable dimensions Ø5.4mm- Operating temperature -15 ... 70 ° C- Resistance to weather conditions- Installation of 2.4 GHz antenna cable, outdoor- Attenuations [dB / 100m]:* 50 [MHz] - 6.5* 100 [MHz] - 9.3 Code K0056 Available Price €2.80
Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF Can be connected with the ESP8266 module with IpexCompatible with Hirose U.FL and IPEX MHF1 Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF features: - Frequency range: 0 ~ 6000MHz- Interface: SMA male connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1.13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40'C ~ + 70'C Code W0024 Available Price €1.95
Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA features:- Standard: GSM / GPRS / 3G- Frequency range: 800 ~ 1900MHz- Interface: SMA male- Gain: 7dBi- Length of the antenna: 20cm- V.S.W.R .: <1.5- Impedance (ohm): 50- Maximum input power (W): 100W- Operating temperature: -40ºC ~ + 70ºC Code W0072 Available Price €6.95
Antenna 2.4GHz WiFi Bluetooth 4dBi IPEX ESP8266 Zigbee Antenna 2.4GHz WiFi Bluetooth 4dBi IPEX ESP8266 Zigbee features: - Works with ESP8266 Zigbee Arduino- Can be connected with the ESP8266 module with ipex- Standard: 2.4GHz- Frequency range: 2100 ~ 2600MHz- Interface: IPEX- Gain: 4dBi +/- 0.7dBi- Length of the antenna: 10cm- V.S.W.R.: <2- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Operating temperature: -40'C ~ + 65'C Code W0081 Available Price €1.85
Dipole Pentaband waterpoof Antenna A waterproof pentaband antenna X000016 for all your wireless projects with Arduino and development boards Code X0016R Available Price €5.95
Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM features:- The cable is used for system transmissions2.4 [GHz] (WiFi, LTE, 3G, GPS)- It is also suitable for the lower frequencies (CB, GSM, PMR)- It has less loss than the type RG-58 cable- Type of coaxial cable- H155 cable series- 50Ω wave impedance- Stranded core structure- Core type Cu- Structure of the laminated Al-PET shield, tinned copper braid- PVC external insulation material- Gray insulation color- Outer cable dimensions Ø5.4mm- Operating temperature -15 ... 70 ° C- Resistance to weather conditions- Installation of 2.4 GHz antenna cable, outdoor- Attenuations [dB / 100m]:* 50 [MHz] - 6.5* 100 [MHz] - 9.3 Code K0056 Available Price €2.80
Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA features:- Standard: GSM / GPRS / 3G- Frequency range: 800 ~ 1900MHz- Interface: SMA male- Gain: 7dBi- Length of the antenna: 20cm- V.S.W.R .: <1.5- Impedance (ohm): 50- Maximum input power (W): 100W- Operating temperature: -40ºC ~ + 70ºC Code W0072 Available Price €6.95
Antenna GSM GPRS 3G IPEX Antenna GSM GPRS 3G IPEX features: - PCB Antenna 2dBi Ipex U.fl 50 Ohm- Standard: 2G 3G IPEX Antenna- Frequency range: 700-960 MHz and ‰¤ 5; 1710-1800 MHz; 1800-1990 MHz- Interface: IPEX- Gain: 2dBi +/- 0.7dBi- Length of the antenna: 10cm- V.S.W.R.: <3.0 @ 780 ~ 960 MHz & <= 3.5 @ 1710 ~ 2170 MHz- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Operating temperature: -40'C ~ + 65'C Code W0082 Available Price €1.85
Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS features: - Standard: GPS 1575.42 MHz- Voltage: 3 ~ 5V- Current: max 10mA- Interface: SMA male- Polarization: circular (right)- LNA gain (without cable): 28dB typ- Noise figure: 1.5dB typ- Operating temperature: -40'C ~ + 85'C- Cable length 150cm- Dimensions: 49 x38 x16 mm Code W0073 Available Price €7.59
Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF Can be connected with the ESP8266 module with IpexCompatible with Hirose U.FL and IPEX MHF1 Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF features: - Frequency range: 0 ~ 6000MHz- Interface: SMA male connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1.13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40'C ~ + 70'C Code W0024 Available Price €1.95
Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino compatible The 19.5cm antenna can be connected to the ESP8266 module with ipex. It works on LoRa 433/868/915 MHz frequencies with SMA interface. Code W0109 Available Price €3.95
Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm Can be connected with the ESP8266 module with IPEXCompatible with Hirose U.FL and IPEX MHF1 Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm features: - Frequency range: 0 ~ 6000MHz- Interface: SMA female connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1,13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40ºC ~ + 70ºC Code W0071 Available Price €2.19
Dipole Pentaband waterpoof Antenna A waterproof pentaband antenna X000016 for all your wireless projects with Arduino and development boards Code X0016R Available Price €5.95
Antenna 2.4GHz WiFi Bluetooth 4dBi IPEX ESP8266 Zigbee Antenna 2.4GHz WiFi Bluetooth 4dBi IPEX ESP8266 Zigbee features: - Works with ESP8266 Zigbee Arduino- Can be connected with the ESP8266 module with ipex- Standard: 2.4GHz- Frequency range: 2100 ~ 2600MHz- Interface: IPEX- Gain: 4dBi +/- 0.7dBi- Length of the antenna: 10cm- V.S.W.R.: <2- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Operating temperature: -40'C ~ + 65'C Code W0081 Available Price €1.85