Bluetooth Wireless Module 4.0 CC2541 Android IOS HM-10 BLE Arduino Android IOS
  • Bluetooth Wireless Module 4.0 CC2541 Android IOS HM-10 BLE Arduino Android IOS
  • Bluetooth Wireless Module 4.0 CC2541 Android IOS HM-10 BLE Arduino Android IOS
  • Bluetooth Wireless Module 4.0 CC2541 Android IOS HM-10 BLE Arduino Android IOS
  • Bluetooth Wireless Module 4.0 CC2541 Android IOS HM-10 BLE Arduino Android IOS
  • Bluetooth Wireless Module 4.0 CC2541 Android IOS HM-10 BLE Arduino Android IOS

Bluetooth Wireless Module 4.0 CC2541 Android IOS HM-10 BLE Arduino Android IOS

W0008

 Master Slave Bluetooth Modul for Arduino iOS Android. The HM10 supports Bluetooth 4.0 (low energy) and therefore has a relatively low power consumption.

Keyes
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Arduino Bluetooth Wireless Module 4.0 CC2541 Android IOS HM-10 BLE description

This module enables the microcontroller to connect wirelessly to a large number of devices via Bluetooth and to exchange serial data. As a slave module, PCs, mobile phones (Android (from 4.3), Windows Mobile and also APPLE without additional circuitry!) can use the serial connection to a microcontroller, e.g. an Arduino. The communication is bidirectional, so it can send and receive. The HM10 supports Bluetooth 4.0 (low energy) and therefore has a relatively low power consumption. It can connect to the RX and TX pins of the microcontroller at the 3V3 logic level and convert the required serial connection into a radio connection. Devices can then be "paired" with the module and, thanks to the encryption and pin, the connection is protected. Parameters are configured via AT commands from the microcontroller. For example, the baud rate, PIN, mode, but also the name of the module can be changed, which becomes visible during pairing. The Texas Instruments CC2541 chip used allows the transmit power to be adjusted via AT commands.

Arduino Bluetooth Wireless Module 4.0 CC2541 Android IOS HM-10 BLE features:

  • - Chipset based on CC2541 TI
  • - Bluetooth Class 2
  • - Industrial level Bluetooth SPP module
  • - Flash 256Kb
  • - Integrated chip antenna
  • - Power supply: 3V6 - 6V (works practically also with 3.3V), logic level 3V3, 50 mA
  • - Working temperature: -5 C to + 60 C
  • - Operating frequency: 2.4 GHz ISM Band
  • - Modulation method: GFSK (Gaussian Frequency Shift keying)
  • - 40 channels, 2MHz, 3 transmission channels Fixed, 37 automatic frequency adaptation skipping data channels;
  • - Output power adjustment (-23dBm ~ 6dBm); command AT +
  • - Transfer rate: asynchronous: 6 kbps synchronous: 6kbps
  • - Security features: authentication and encryption
  • - Power consumption: automatic sleep mode, standby current 60uA, 8.5 mA transfer.
  • - Size: 40x16mm

Data sheet

Chip
CC2541
Pines
Con pines

Customers who bought this product also bought

LM2596 DC Voltmeter Converter 3A Step Down Adjustable Power

Descent module.
Use a multimeter to check the output voltage and adjust the potentiometer.
Control of tension.
LM2596 DC Voltmeter Converter 3A Step Down Adjustable Power features:
- Input voltage: 4.5-38V
- Output voltage: 1.25-36.5V
- Current output: 2A (max 3A with heat sink)
- Operating temperature: -40 to + 85 ºC
- Operating frequency: 150KHz
- Efficiency conversion: up to 92%
- Load Regulation: +/- 0.5%
- Voltage Regulation: +/- 2.5%
- Protection over temperature: the output switches off automatically
- Size: 62mm x 38mm x 15mm
Principal functions:
- Step-down converter with overcurrent protection
- Voltmeter up to 40V, remember to set the input voltage to 4.5V

A0013

Price €3.30

L298N Motor Drive Controller Board Module Dual H Bridge DC

It allows controlling up to 2 direct current motors or a bipolar stepper motor. It also allows to control a unipolar stepper motor configured as bipolar.
Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32.
L298N Motor Drive Controller Board Module Dual H Bridge DC features:
- Minimum operating voltage: 5 V
- Maximum operating voltage: 35 V
- Maximum current: ± 2 A
- Logic voltage: 5V
- PWM signal inputs for speed control
- Outputs: for 2 DC motors or for a bipolar stepper motor
- Measures: 43x43x24 mm
Helpful Links:
Operation of the robot by Infrared / Operation of the robot by Bluetooth / Automatic operation with detection of obstacles

M0100

Price €2.31

HX711 Module Weighing Pressure Sensor 24 Bits

The module uses a 24-bit high precision A/D conversion chip HX711.
The input circuit can be configured to provide a bridge.
The electric bridge voltage sensor model (such as pressure, weight) is an ideal sampling module with high precision and low cost. HX711 Module Weighing Pressure Sensor 24 Bits features:
- Two selectable differential input channels
- Active low noise PGA with selectable gain of 32, 64 and 128
- Power supply regulator for load cell and ADC analog power supply
- Oscillator on chip that does not require external component with optional external glass
- Power-on-reset on the chip
- Simple serial control and serial interface: controls driven by pins, programming is not required
- Output data rate 10SPS or 80SPS selectable

M0118

Regular price €2.31 -€0.39 Price €1.92

30x Rectifier Diodes 1N4148 100V 200mA DO-35

Low Signal High Speed ​​Switching.
These diodes are widely used to multiplex signals, such as buttons or digital inputs Characteristic:
- Reverse voltage: 100V,
- Forward voltage drop: 1V to 10mA,
- Forward direct current: 200mA,
- Maximum overvoltage current: 4A,
- Dissipated power: 500mW,
- Recovery time: 4ns,
- Configuration: Simple,
- Package: DO-35,
- Quantity: 30 units .

T0003

Price €0.03

65x Cable Jumper Male

Lot of 65 Male-Male jumper cables. Characteristic: -No soldering required
-You can easily modify or revise the circuits
-Quantity: 65 cables of different lengths and colors
-Cable lengths: 120mm, 150mm, 200mm, 240mm

K0010

Regular price €2.88 -€0.60 Price €2.28
€14.79

14,79 tax excl.

1
11 items
Price €14.79

Order until 4pm we will send today
30 days return