MPU-6050 Accelerometer Module + Gyroscope 3 Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32. MPU-6050 Accelerometer Module + Gyroscope 3 features:- Chip: MPU-6050- Power supply: 3V-5V- Operating current: 5mA- Communication: I2C- 16-bit analog-digital converter on all axes- Gyroscope scales: ± 250, ± 500, ± 1000 and ± 2000 ° / sec (dps) (programmable by the user)- Accelerometer scales: ± 2g, ± 4g, ± 8g and ± 16g (programmable by the user)- Dimensions: 14 x 21 x 1.3mm- Quantity: 1 unit (1 strip of 8 pin + 1 strip of 8 layered pin) Code M0017 Available Price €4.29
FireBeetle ESP32 IOT Microcontroller (Supports Wi-Fi and Bluetooth) FireBeetle 2 ESP32, specially designed for IoT, is a main controller board based on ESP-WROOM-32D with dual-core chips. The FireBeetle microcontroller is compatible with Arduino Uno. It integrates the ESP-WROOM-32 dual-core module, which supports MCU, WiFi and Bluetooth communication. Code DF026 Last items in stock Price €11.95
Logging Recorder Data Logger Module Shield UNO Mega SD Card It allows to save the record of any data.It has a real time clock RTC, with battery included, so you can keep the date and time over the years and an SD notes reader, which accepts the format FAT16 and FAT32 to record your data. Logging Recorder Data Logger Module Shield UNO Mega SD Card features: - Arduino data logging shield- Data recording module to the FAT16 / FAT32 SD card- Real time with RTC battery.- SD card interface compatible with the FAT16 / FAT32 format- Transmitter circuit level 3.3V.- Compatible with Arduino UNO, Leonardo, ADK / Mega R3 or higher Code M0022 Available Price €7.90
40x Male to male cables 10cm 40x Male to male cables 10cm features: - Length: 10cm - Quantity: 40 cables - Dupont male connectors on both ends - Compatible with 2.54mm female connectors - High quality and good working condition - Easy to install and use Code K0107 Available Price €1.99
BMP280 Temperature Barometric Pressure Sensor Module/SPI This module includes the BMP280 component that converts atmospheric pressure, temperature and humidity with high precision into a digital signal.The equipment uses the two I2C and SPI interfaces. The very good measurements made by the BMP280 allows the module to be used as an altimeter.Its 5-pin straight connector allows easy connection to other electronic boards. BMP280 Temperature Barometric Pressure Sensor Module/SPI features: - Interfaces: -I2C (up to 3.4 MHz) -SPI (up to 10 MHz)- Supply voltage: 1.8-5VDC- Module operating range: - Temperature: -40ºC to + 85ºC0-100% - Pressure: 300-1100 hPa- Resolution of the measures: - Temperature: 0.01ºC Code M0134 Available Price €4.99
RGB LED Strip WS2812B Black 1m 30 LED/M IP65 RGB LED Strip WS2812B Black 1m 30 LED/M IP65 features: - RGB LED WS2812B - WS2812B are LEDs that have integrated logic, making it possible to vary the color of each LED in a way individual - WS2812B includes a built-in inside each LED, which allows each pixel to be accessed individually - For this reason, these types of LEDs are called individually indexable. - They are based on the 5050 LEDs - 30 individually indexable LED diodes - 24-bit color control (8-bit PWM per channel) - 16.8 million colors per LED - Communication One-wire - Power: 5 V - Width: 11 mm - Thickness: 2.6 mm - Length: 1 meter - Consumption: 1.8A (all white) - Waterproof - With 3M adhesive Code P0101 Available Price €9.75
Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin Expansion Board GPIO Shield 40 Raspberry Pi B+ Pin features: - Shield module for Raspberry Pi 2 and Pi 3, B and B + Code RA013 Available Price €6.85
Nozzle Head 0.4 1.75mm MK8 3D Printer Extruder Nozzle Head 0.4 1.75mm MK8 3D Printer Extruder features: - MK8 Precision Nozzle: 0.4mm - Material: Copper - Size: 13mm x 6mm - Suitable for Filament: 1.75mm - Quantity: 1 unit Code I0076 Available Price €1.39
Antenna GSM GPRS 3G IPEX Antenna GSM GPRS 3G IPEX features: - PCB Antenna 2dBi Ipex U.fl 50 Ohm- Standard: 2G 3G IPEX Antenna- Frequency range: 700-960 MHz and ‰¤ 5; 1710-1800 MHz; 1800-1990 MHz- Interface: IPEX- Gain: 2dBi +/- 0.7dBi- Length of the antenna: 10cm- V.S.W.R.: <3.0 @ 780 ~ 960 MHz & <= 3.5 @ 1710 ~ 2170 MHz- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Operating temperature: -40'C ~ + 65'C Code W0082 Available Price €1.85
Dipole Pentaband waterpoof Antenna A waterproof pentaband antenna X000016 for all your wireless projects with Arduino and development boards Code X0016R Available Price €5.95
Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm Can be connected with the ESP8266 module with IPEXCompatible with Hirose U.FL and IPEX MHF1 Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm features: - Frequency range: 0 ~ 6000MHz- Interface: SMA female connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1,13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40ºC ~ + 70ºC Code W0071 Available Price €2.19
Antenna 2.4GHz WiFi Bluetooth 4dBi IPEX ESP8266 Zigbee Antenna 2.4GHz WiFi Bluetooth 4dBi IPEX ESP8266 Zigbee features: - Works with ESP8266 Zigbee Arduino- Can be connected with the ESP8266 module with ipex- Standard: 2.4GHz- Frequency range: 2100 ~ 2600MHz- Interface: IPEX- Gain: 4dBi +/- 0.7dBi- Length of the antenna: 10cm- V.S.W.R.: <2- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Operating temperature: -40'C ~ + 65'C Code W0081 Available Price €1.85
Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino compatible Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino features: - Can be connected with the ESP8266 module with ipex- Standard: 2.4GHz- Frequency range: 2400 ~ 2500MHz- Interface: SMA- Gain: 3dBi- Length of the antenna: 10cm- V.S.W.R.: <1.5- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40'C ~ + 70'C Code W0070 Available Price €4.50
Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF Can be connected with the ESP8266 module with IpexCompatible with Hirose U.FL and IPEX MHF1 Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF features: - Frequency range: 0 ~ 6000MHz- Interface: SMA male connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1.13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40'C ~ + 70'C Code W0024 Available Price €1.95
Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino compatible The 19.5cm antenna can be connected to the ESP8266 module with ipex. It works on LoRa 433/868/915 MHz frequencies with SMA interface. Code W0109 Available Price €3.95
Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM features:- The cable is used for system transmissions2.4 [GHz] (WiFi, LTE, 3G, GPS)- It is also suitable for the lower frequencies (CB, GSM, PMR)- It has less loss than the type RG-58 cable- Type of coaxial cable- H155 cable series- 50Ω wave impedance- Stranded core structure- Core type Cu- Structure of the laminated Al-PET shield, tinned copper braid- PVC external insulation material- Gray insulation color- Outer cable dimensions Ø5.4mm- Operating temperature -15 ... 70 ° C- Resistance to weather conditions- Installation of 2.4 GHz antenna cable, outdoor- Attenuations [dB / 100m]:* 50 [MHz] - 6.5* 100 [MHz] - 9.3 Code K0056 Available Price €2.80
Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA features:- Standard: GSM / GPRS / 3G- Frequency range: 800 ~ 1900MHz- Interface: SMA male- Gain: 7dBi- Length of the antenna: 20cm- V.S.W.R .: <1.5- Impedance (ohm): 50- Maximum input power (W): 100W- Operating temperature: -40ºC ~ + 70ºC Code W0072 Available Price €6.95
Antenna GSM GPRS 3G IPEX Antenna GSM GPRS 3G IPEX features: - PCB Antenna 2dBi Ipex U.fl 50 Ohm- Standard: 2G 3G IPEX Antenna- Frequency range: 700-960 MHz and ‰¤ 5; 1710-1800 MHz; 1800-1990 MHz- Interface: IPEX- Gain: 2dBi +/- 0.7dBi- Length of the antenna: 10cm- V.S.W.R.: <3.0 @ 780 ~ 960 MHz & <= 3.5 @ 1710 ~ 2170 MHz- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Operating temperature: -40'C ~ + 65'C Code W0082 Available Price €1.85
Dipole Pentaband waterpoof Antenna A waterproof pentaband antenna X000016 for all your wireless projects with Arduino and development boards Code X0016R Available Price €5.95
Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm Can be connected with the ESP8266 module with IPEXCompatible with Hirose U.FL and IPEX MHF1 Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm features: - Frequency range: 0 ~ 6000MHz- Interface: SMA female connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1,13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40ºC ~ + 70ºC Code W0071 Available Price €2.19
Antenna 2.4GHz WiFi Bluetooth 4dBi IPEX ESP8266 Zigbee Antenna 2.4GHz WiFi Bluetooth 4dBi IPEX ESP8266 Zigbee features: - Works with ESP8266 Zigbee Arduino- Can be connected with the ESP8266 module with ipex- Standard: 2.4GHz- Frequency range: 2100 ~ 2600MHz- Interface: IPEX- Gain: 4dBi +/- 0.7dBi- Length of the antenna: 10cm- V.S.W.R.: <2- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Operating temperature: -40'C ~ + 65'C Code W0081 Available Price €1.85
Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino compatible Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino features: - Can be connected with the ESP8266 module with ipex- Standard: 2.4GHz- Frequency range: 2400 ~ 2500MHz- Interface: SMA- Gain: 3dBi- Length of the antenna: 10cm- V.S.W.R.: <1.5- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40'C ~ + 70'C Code W0070 Available Price €4.50
Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF Can be connected with the ESP8266 module with IpexCompatible with Hirose U.FL and IPEX MHF1 Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF features: - Frequency range: 0 ~ 6000MHz- Interface: SMA male connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1.13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40'C ~ + 70'C Code W0024 Available Price €1.95
Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino compatible The 19.5cm antenna can be connected to the ESP8266 module with ipex. It works on LoRa 433/868/915 MHz frequencies with SMA interface. Code W0109 Available Price €3.95
Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM features:- The cable is used for system transmissions2.4 [GHz] (WiFi, LTE, 3G, GPS)- It is also suitable for the lower frequencies (CB, GSM, PMR)- It has less loss than the type RG-58 cable- Type of coaxial cable- H155 cable series- 50Ω wave impedance- Stranded core structure- Core type Cu- Structure of the laminated Al-PET shield, tinned copper braid- PVC external insulation material- Gray insulation color- Outer cable dimensions Ø5.4mm- Operating temperature -15 ... 70 ° C- Resistance to weather conditions- Installation of 2.4 GHz antenna cable, outdoor- Attenuations [dB / 100m]:* 50 [MHz] - 6.5* 100 [MHz] - 9.3 Code K0056 Available Price €2.80
Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA features:- Standard: GSM / GPRS / 3G- Frequency range: 800 ~ 1900MHz- Interface: SMA male- Gain: 7dBi- Length of the antenna: 20cm- V.S.W.R .: <1.5- Impedance (ohm): 50- Maximum input power (W): 100W- Operating temperature: -40ºC ~ + 70ºC Code W0072 Available Price €6.95