Arduino MKR FOX 1200 (without antenna) The Arduino MKR FOX 1200 board offers a practical and cost-effective solution for adding Sigfox connectivity to projects requiring low power. Code ABX14R ✗ Out-of-Stock Price €43.49
Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth ESP32 processor development board with WiFi and Bluetooth (BLE) compatible with Arduino Uno shields. It is much faster than the ESP8266 processor (NodeMCU and the like) . Wemos D1 ESP32 R32 WROOM-32 WiFi and Bluetooth features: Power: 5-12VDC WiFi 802.11 b / g / n / e / i (802.11n up to 150 Mbps) Bluetooth v4.2 BR / EDR and BLE. Compatible with Arduino Uno shields. 6 Analog input. 20 digital inputs / outputs (3.3V) (with PWM functions, interrupt). UART, SPI, I2C communication. Size: 68Ã — 53 mm Micro USB connection. 4Mbytes Flash Memory 520Kb Clock: 240Mhz (a core dedicated to WiFi processing) Temperature: -40C + 85C Current: 250mA (max) Current in saving mode: 0.15mA Operating current: 20mA (without WiFi) Useful links for Arduino / Raspberry programming and projects with Arduino / Code W0094 Available Price €9.95
Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS features: - Standard: GPS 1575.42 MHz- Voltage: 3 ~ 5V- Current: max 10mA- Interface: SMA male- Polarization: circular (right)- LNA gain (without cable): 28dB typ- Noise figure: 1.5dB typ- Operating temperature: -40'C ~ + 85'C- Cable length 150cm- Dimensions: 49 x38 x16 mm Code W0073 Available Price €7.59
BMP280 Temperature Barometric Pressure Sensor Module/SPI This module includes the BMP280 component that converts atmospheric pressure, temperature and humidity with high precision into a digital signal.The equipment uses the two I2C and SPI interfaces. The very good measurements made by the BMP280 allows the module to be used as an altimeter.Its 5-pin straight connector allows easy connection to other electronic boards. BMP280 Temperature Barometric Pressure Sensor Module/SPI features: - Interfaces: -I2C (up to 3.4 MHz) -SPI (up to 10 MHz)- Supply voltage: 1.8-5VDC- Module operating range: - Temperature: -40ºC to + 85ºC0-100% - Pressure: 300-1100 hPa- Resolution of the measures: - Temperature: 0.01ºC Code M0134 Available Regular price €4.99 -€1.00 Price €3.99
PCB Heated Bed MK3 Alu 3mm 12V 24V 3D Printer PCB Heated Bed MK3 Alu 3mm 12V 24V Reprap 3D Printer features: - Similar to MK2, can also be used with 12 volts or 24 volts - Measurements: 214 x 214 mm - 1 layer of 35μm (1 oz base) of copper Code I0091 Available Price €11.99
Nozzle Head 0.4 1.75mm MK8 3D Printer Extruder Nozzle Head 0.4 1.75mm MK8 3D Printer Extruder features: - MK8 Precision Nozzle: 0.4mm - Material: Copper - Size: 13mm x 6mm - Suitable for Filament: 1.75mm - Quantity: 1 unit Code I0076 Available Price €1.39
Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF Can be connected with the ESP8266 module with IpexCompatible with Hirose U.FL and IPEX MHF1 Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF features: - Frequency range: 0 ~ 6000MHz- Interface: SMA male connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1.13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40'C ~ + 70'C Code W0024 Available Price €1.95
Black box with fan for Raspberry Pi 4 model B All ports and slots on the case can perfectly match Raspberry Pi 4 Model B. Code RA097 Last items in stock Price €2.99
Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM features:- The cable is used for system transmissions2.4 [GHz] (WiFi, LTE, 3G, GPS)- It is also suitable for the lower frequencies (CB, GSM, PMR)- It has less loss than the type RG-58 cable- Type of coaxial cable- H155 cable series- 50Ω wave impedance- Stranded core structure- Core type Cu- Structure of the laminated Al-PET shield, tinned copper braid- PVC external insulation material- Gray insulation color- Outer cable dimensions Ø5.4mm- Operating temperature -15 ... 70 ° C- Resistance to weather conditions- Installation of 2.4 GHz antenna cable, outdoor- Attenuations [dB / 100m]:* 50 [MHz] - 6.5* 100 [MHz] - 9.3 Code K0056 Available Price €2.80
Dipole Pentaband waterpoof Antenna A waterproof pentaband antenna X000016 for all your wireless projects with Arduino and development boards Code X0016R Available Price €5.95
Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm Can be connected with the ESP8266 module with IPEXCompatible with Hirose U.FL and IPEX MHF1 Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm features: - Frequency range: 0 ~ 6000MHz- Interface: SMA female connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1,13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40ºC ~ + 70ºC Code W0071 Available Price €2.19
Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA features:- Standard: GSM / GPRS / 3G- Frequency range: 800 ~ 1900MHz- Interface: SMA male- Gain: 7dBi- Length of the antenna: 20cm- V.S.W.R .: <1.5- Impedance (ohm): 50- Maximum input power (W): 100W- Operating temperature: -40ºC ~ + 70ºC Code W0072 Available Price €6.95
Antenna 2.4GHz WiFi Bluetooth 4dBi IPEX ESP8266 Zigbee Antenna 2.4GHz WiFi Bluetooth 4dBi IPEX ESP8266 Zigbee features: - Works with ESP8266 Zigbee Arduino- Can be connected with the ESP8266 module with ipex- Standard: 2.4GHz- Frequency range: 2100 ~ 2600MHz- Interface: IPEX- Gain: 4dBi +/- 0.7dBi- Length of the antenna: 10cm- V.S.W.R.: <2- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Operating temperature: -40'C ~ + 65'C Code W0081 Available Price €1.85
Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino compatible Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino features: - Can be connected with the ESP8266 module with ipex- Standard: 2.4GHz- Frequency range: 2400 ~ 2500MHz- Interface: SMA- Gain: 3dBi- Length of the antenna: 10cm- V.S.W.R.: <1.5- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40'C ~ + 70'C Code W0070 Available Price €4.50
Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF Can be connected with the ESP8266 module with IpexCompatible with Hirose U.FL and IPEX MHF1 Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF features: - Frequency range: 0 ~ 6000MHz- Interface: SMA male connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1.13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40'C ~ + 70'C Code W0024 Available Price €1.95
Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino compatible The 19.5cm antenna can be connected to the ESP8266 module with ipex. It works on LoRa 433/868/915 MHz frequencies with SMA interface. Code W0109 Available Price €3.95
Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS features: - Standard: GPS 1575.42 MHz- Voltage: 3 ~ 5V- Current: max 10mA- Interface: SMA male- Polarization: circular (right)- LNA gain (without cable): 28dB typ- Noise figure: 1.5dB typ- Operating temperature: -40'C ~ + 85'C- Cable length 150cm- Dimensions: 49 x38 x16 mm Code W0073 Available Price €7.59
Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM features:- The cable is used for system transmissions2.4 [GHz] (WiFi, LTE, 3G, GPS)- It is also suitable for the lower frequencies (CB, GSM, PMR)- It has less loss than the type RG-58 cable- Type of coaxial cable- H155 cable series- 50Ω wave impedance- Stranded core structure- Core type Cu- Structure of the laminated Al-PET shield, tinned copper braid- PVC external insulation material- Gray insulation color- Outer cable dimensions Ø5.4mm- Operating temperature -15 ... 70 ° C- Resistance to weather conditions- Installation of 2.4 GHz antenna cable, outdoor- Attenuations [dB / 100m]:* 50 [MHz] - 6.5* 100 [MHz] - 9.3 Code K0056 Available Price €2.80
Dipole Pentaband waterpoof Antenna A waterproof pentaband antenna X000016 for all your wireless projects with Arduino and development boards Code X0016R Available Price €5.95
Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm Can be connected with the ESP8266 module with IPEXCompatible with Hirose U.FL and IPEX MHF1 Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm features: - Frequency range: 0 ~ 6000MHz- Interface: SMA female connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1,13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40ºC ~ + 70ºC Code W0071 Available Price €2.19
Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA features:- Standard: GSM / GPRS / 3G- Frequency range: 800 ~ 1900MHz- Interface: SMA male- Gain: 7dBi- Length of the antenna: 20cm- V.S.W.R .: <1.5- Impedance (ohm): 50- Maximum input power (W): 100W- Operating temperature: -40ºC ~ + 70ºC Code W0072 Available Price €6.95
Antenna 2.4GHz WiFi Bluetooth 4dBi IPEX ESP8266 Zigbee Antenna 2.4GHz WiFi Bluetooth 4dBi IPEX ESP8266 Zigbee features: - Works with ESP8266 Zigbee Arduino- Can be connected with the ESP8266 module with ipex- Standard: 2.4GHz- Frequency range: 2100 ~ 2600MHz- Interface: IPEX- Gain: 4dBi +/- 0.7dBi- Length of the antenna: 10cm- V.S.W.R.: <2- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Operating temperature: -40'C ~ + 65'C Code W0081 Available Price €1.85
Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino compatible Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino features: - Can be connected with the ESP8266 module with ipex- Standard: 2.4GHz- Frequency range: 2400 ~ 2500MHz- Interface: SMA- Gain: 3dBi- Length of the antenna: 10cm- V.S.W.R.: <1.5- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40'C ~ + 70'C Code W0070 Available Price €4.50
Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF Can be connected with the ESP8266 module with IpexCompatible with Hirose U.FL and IPEX MHF1 Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF features: - Frequency range: 0 ~ 6000MHz- Interface: SMA male connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1.13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40'C ~ + 70'C Code W0024 Available Price €1.95
Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino compatible The 19.5cm antenna can be connected to the ESP8266 module with ipex. It works on LoRa 433/868/915 MHz frequencies with SMA interface. Code W0109 Available Price €3.95
Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS features: - Standard: GPS 1575.42 MHz- Voltage: 3 ~ 5V- Current: max 10mA- Interface: SMA male- Polarization: circular (right)- LNA gain (without cable): 28dB typ- Noise figure: 1.5dB typ- Operating temperature: -40'C ~ + 85'C- Cable length 150cm- Dimensions: 49 x38 x16 mm Code W0073 Available Price €7.59