Male Pigtail Adapter IPEX SMA 2.4GHz 1.13mm 50 Ohm GPS GSM WiFi RF

Low Loss Coax Cable H-155 2.4GHz WiFi LTE GSM features:
- The cable is used for system transmissions
2.4 [GHz] (WiFi, LTE, 3G, GPS)
- It is also suitable for the lower frequencies (CB, GSM, PMR)
- It has less loss than the type RG-58 cable
- Type of coaxial cable
- H155 cable series
- 50Ω wave impedance
- Stranded core structure
- Core type Cu
- Structure of the laminated Al-PET shield, tinned copper braid
- PVC external insulation material
- Gray insulation color
- Outer cable dimensions Ø5.4mm
- Operating temperature -15 ... 70 ° C
- Resistance to weather conditions
- Installation of 2.4 GHz antenna cable, outdoor
- Attenuations [dB / 100m]:
* 50 [MHz] - 6.5
* 100 [MHz] - 9.3

A waterproof pentaband antenna X000016  for all your wireless projects with Arduino and development boards

Universal Magnetic Antenna Connector Male Plug SMA 150cm GPS features:
- Standard: GPS 1575.42 MHz
- Voltage: 3 ~ 5V
- Current: max 10mA
- Interface: SMA male
- Polarization: circular (right)
- LNA gain (without cable): 28dB typ
- Noise figure: 1.5dB typ
- Operating temperature: -40'C ~ + 85'C
- Cable length 150cm
- Dimensions: 49 x38 x16 mm

Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino features:
- Can be connected with the ESP8266 module with ipex
- Standard: 2.4GHz
- Frequency range: 2400 ~ 2500MHz
- Interface: SMA
- Gain: 3dBi
- Length of the antenna: 10cm
- V.S.W.R.: <1.5
- Polarization: Vertical
- No Circularity (dB): +/- 0.5
- Impedance (ohm): 50
- Maximum input power (W): 50W
- Operating temperature: -40'C ~ + 70'C

Antenna with Magnetic Base Male GSM GPRS 3G 800MHz 1800MHz 1900MHz 7dBI SMA features:
- Standard: GSM / GPRS / 3G
- Frequency range: 800 ~ 1900MHz
- Interface: SMA male
- Gain: 7dBi
- Length of the antenna: 20cm
- V.S.W.R .: <1.5
- Impedance (ohm): 50
- Maximum input power (W): 100W
- Operating temperature: -40ºC ~ + 70ºC

The 19.5cm antenna can be connected to the ESP8266 module with ipex. It works on LoRa 433/868/915 MHz frequencies with SMA interface.

Antenna 2.4GHz WiFi Bluetooth 4dBi IPEX ESP8266 Zigbee features:
- Works with ESP8266 Zigbee Arduino
- Can be connected with the ESP8266 module with ipex
- Standard: 2.4GHz
- Frequency range: 2100 ~ 2600MHz
- Interface: IPEX
- Gain: 4dBi +/- 0.7dBi
- Length of the antenna: 10cm
- V.S.W.R.: <2
- Polarization: Vertical
- No Circularity (dB): +/- 0.5
- Impedance (ohm): 50
- Operating temperature: -40'C ~ + 65'C

Can be connected with the ESP8266 module with IPEX
Compatible with Hirose U.FL and IPEX MHF1 Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm features:
- Frequency range: 0 ~ 6000MHz
- Interface: SMA female connector
- IPEX female connector
- Cable length: 15cm
- Coaxial cable: 1,13mm
- V.S.W.R.: <1.5
- Impedance (ohm): 50
- Maximum input power (W): 50W
- Operating temperature: -40ºC ~ + 70ºC

Antenna GSM GPRS 3G IPEX features:
- PCB Antenna 2dBi Ipex U.fl 50 Ohm
- Standard: 2G 3G IPEX Antenna
- Frequency range: 700-960 MHz and ‰¤ 5; 1710-1800 MHz; 1800-1990 MHz
- Interface: IPEX
- Gain: 2dBi +/- 0.7dBi
- Length of the antenna: 10cm
- V.S.W.R.: <3.0 @ 780 ~ 960 MHz &
  <= 3.5 @ 1710 ~ 2170 MHz
- Polarization: Vertical
- No Circularity (dB): +/- 0.5
- Impedance (ohm): 50
- Operating temperature: -40'C ~ + 65'C