Tools

8-channel oscilloscope for vehicle testing.
More than 80 kinds of automotive diagnostic functions (ignition detection / sensor / bus detection / performance / starting and charging circuits , etc.). The video help function provides the diagnostic video help that can be viewed online. The diagnostic result can be generated a diagnostic report, printed or taken a screenshot by pressing a key, many methods to save the data. Supported for recording waveform for a long time. You can simulate the camshaft and crankshaft signal. Transmit signals through the USB 2.0 plug and play interface, and requires no additional power supply; Key Hantek 1008C PC Oscilloscope USB 8 Channel Automotive Diagnostic DAQ features:

Hantek Oscilloscope 6022BE USB 2 channel 20MHz features:
- 20 MHz bandwidth
- High performance: 48MSa / s sampling in real time
- 23 measurement functions
- The ability to perform mathematical operations:
- Addition - add CH1 + CH1
- Subtraction - subtract CH1-CH2 or CH2-CH-1 - Multiplication - multiplication CH1 * CH2
- Division - division CH1: CH2 or CH2: CH1
- FFT analysis spectral analysis using a fast Fourier transform
- The ability to save runs in the following formats: text files, jpg / bmp graphics files, Excel / MS Word files, CSV
- Compatible with LabVIEW
-USB 2.0 communication interface - powered from the USB port - Operating System: Windows8, Windows 7, Windows NT, Windows 2000, Windows XP, VISTA

Highly efficient and cost-effective oscilloscope with 2 channels. The high quality anodized aluminum case. The bandwidth is 20 MHz and the sampling rate is 48 MSa / s.
Hantek Oscilloscope 6022BL USB 2 channel 20MHz features:

16-channel logic analyzer, 20MHz bandwidth.
Operating system: Windows 7, Windows NT, Windows XP, Windows Vista. More than 20 kinds of automatic measurement functions.
Intensity, inversion, addition, subtraction, multiplication, division, XY.
Save the waves that appear on screen in JPG / BMP or excel formats. FFT spectrum analysis function.
One computer can connect to many DSOs, the channel can be easily extended.
Specifications:
Inputs: 2 channels.
Bandwidth: 20 MHz.

Soldering Station 48W features:
- Heating element for soldering iron: 48W
- Temperature: 150 ° C - 480 ° C
- Power: 220-240Vac
- Temperature controlled soldering station 48W,
- Adjust the desired temperature of the soldering iron with the adjustment knob,
- The color-coded areas are similar to the following temperatures:
- Yellow approx. 150 „ƒ
- Orange approx.> 150 to 270 „ƒ
- Red approx.> 270 to 480 „ƒ
- Wait about 2-3 minutes until the solder tip reaches the set temperature.

This attenuator allows the oscilloscope to measure the fuel injector and primary ignition waveforms. Passive attenuator with a 20:1 attenuation Therefore, if a 20V signal is introduced, it will emit a 1V signal. Using this element, the oscilloscope can measure voltage higher than its range (*20V)

Test probe for oscilloscope, kit with all the material as spare part or additional cable. Ergonomic clamp with x10 or normal x1 attenuation.

4-channel digital mixed-signal oscilloscope with 16 digital channels. Bandwidth 70 MHz, real time sampling rate 8 GSa/s, 9" colour display, 200 Mpts memory and the ability to record up to 500,000 oscillograms/second. Integrates 7 independent instruments in 1

Soldering Iron Tin 60W Dual Watt 30W Replaceable Tip features:
- Power: 30W/60W
- Power: 220V-240V
- Equipped with B3 tip
- Long duration tip
- Certifications CE, RoHS
- Blister packaging
- Quantity: 1 unit

Wood Burning Thermograuvre Pyrograph 30W 6 Replacement Tips features:
- Pyrography type pencil, with 6 replacement tips with different shapes and thicknesses. Ideal for carpentry and joinery
- Can be used on different materials, the most common are wood, leather and rubber, but can also be used with other materials
- Number of nozzles: 6 units
- Power: 30W
- Voltage: 220-240V
- Caution: do not touch the tip of the pyrograph while it is hot. Change the mouthpiece with tweezers or wait for it to cool
- Certifications CE, RoHS, LVD

This Hantek CC-65 clamp is a special accessory for oscilloscope by means of BNC connector, which allows to measure the parameters and current waveforms. Its current transducer linearly transforms AC or DC current into AC or DC current voltage. By connecting the current clamp to an oscilloscope, the waveform of the current signal can be observed.

This Hantek CC-65 clamp is a special accessory for oscilloscope by means of BNC connector, which allows to measure the parameters and current waveforms. Its current transducer linearly transforms AC or DC current into AC or DC current voltage. By connecting the current clamp to an oscilloscope, the waveform of the current signal can be observed.

Soldering Iron 40W features:
- Power: 40W
- Power: 230V
- Equipped with tip B1
- Long length tip: 1mm
- Anti-thermal handle
- CE, RoHS and TUV certifications

Virtual multimeter for PC, it replaces a conventional multimeter and also performs functions of autonomous datalogger and recorder.
Characteristic:
- Continuous measurement and recording of values ​​of voltages, currents, resistances, capacity, etc., in real time and with creation of graphs and curves,
- Electrical insulation,
- Compatible with Windows 2000, Windows 7, Windows XP, Win8 / 10
- Plug & play connection via USB,
- Simple and intuitive software.
Measurements and tolerances:

Hot Air Digital Soldering Station ZD-8907 SMD features:
- For welding and desoldering SMD components
- Power: 220V-240V
- Temperature regulation 200°C - 500°C
- Power consumption 320 W (max.)
- Air Flow 22 l/min. (Max.)
- Nozzle diameter 21.5 mm
- Dimensions 58 × 290 mm
- Certifications CE, RoHS, LVD
- Guarantee 12 months

Power supply: 220V-240V Temperature regulation 160 ° C -480 ° C Power consumption 320 W (max.) Flow of Air 24 l / min. (Max.) Dimensions 160x 225x 138mm CE, RoHS, LVD Certifications 12-month warranty

Stabilized laboratory power supply with smoothly adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5A. The power supply is fan cooled which allows the power supply to work in constant mode.

Stabilized power supply with adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5 A.
The fan cools the power supply and can operate in constant mode. Power supply 30V 5A UNI-T UTP3315TFL features:
- Input voltage: 230VAC
- Output voltage: 0-30V adjustable
- Output current: 0-5A adjustable
- Backlit display
- Protection against over-consumption and short circuit
- Cooled by fan
- Includes crocodile clip cables Uni-T UTP3315TFL datasheet
Load Regulation
Voltage & lt; = 0.01% + 3mV
Current & lt; = 0.2% + 3mA
Line Regulation
Voltage & lt; = 0.01% + 3mV
Current & lt; = 0.1% + 5mA
Ripple and Noise
Voltage 1mV rms
Current 3mA rms

Soldering Gun with Dual Color 30W/70W features:
- Power: 30W, maximum 70W
- Power: 230V
- Equipped with tip B1
- Long length tip: 1mm
- Anti-thermal handle
- CE, RoHS and TÃœV certifications Instructions: When connected, the initial power runs at 30W.
When you press the button, the energy runs around 70W.
When you release the button, the power will slowly descend to 30W again.

Soldering Station 48W + Soldering Set features:
- Heating element for soldering iron: 48W
- Temperature: 150 ° C - 450 ° C
- Power: 220-240Vac
- Temperature controlled soldering station 48W,
- Adjust the desired temperature of the soldering iron with the adjustment knob,
- The color-coded areas are similar to the following temperatures:
- Yellow approx. 150 „ƒ
- Orange approx.> 150 to 270 „ƒ
- Red approx.> 270 to 480 „ƒ
- Wait about 2-3 minutes until the solder tip reaches the set temperature.

The UTP1300 series are single channel linear DC power supplies with low ripple / noise, overload protection and constant voltage / current characteristics.

Maximum power: 300 W

Adjustable voltage and current

ESD compatible gloves made of polyester with woven conductive fibres.

Stabilized laboratory power supply with smoothly adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5A. The power supply is fan cooled which allows the power supply to work in constant mode.

60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 0.7mm 50g features:
- 50gr. 0.7mm diameter welding wire. 60% tin and 40% lead.
- Fusing temperature 183°C/190°C.
- Alloy: Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit

The JDS6600 series DDS signal generator can generate sine waves, square waves, triangle waves, pulse waves and arbitrary waves, etc. The frequency will be up to 15MHz. And it has duty cycle correction, amplitude modulation function and frequency sweep function etc. It can display output signal, amplitude and frequency at the same time. This series has amplitude frequency characteristics, and the appearance is very delicate and beautiful. It can be applied in factories, schools, research institutes and laboratories. There are 5 models, JDS6600-60M, JDS6600-50M, JDS6600-40M, JDS6600-30M and JDS6600-15M. The main difference is the maximum sine wave output frequency. JDS6600 -15MHZ is the maximum output frequency of the sine wave.

ZD-8906 Digital Soldering Station 30W features:
- For general electronics and repairs
- High potency ceramic resistance that provides a fast recovery of temperature
- Soldering iron holder
- Heating element for soldering iron: 30W
- Resistance: Ceramic
- Temperature: 160 °C - 550 °C
- Power: 220-240Vac
- Certifications CE, RoHS, LVD

USB SALEAE is an 8-channel logic analyzer without memory, a maximum sampling speed of 24MHz (depends on the PC and the use of the USB bus).
It allows you to record and display digital data read on the computer.
Logic Analyzer 8-Channel 24MHz features:
- 8 channels
- 24MHz sampling frequency
- 1000M samples
- USB power
- USB 2.0 HiSpeed
- 5V supply voltage
- LED - power indicator
- LED - logic indicator 0-1 on channel 1
- USB connection
You can change the sampling frequency by hand: 24MHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500kHz, 250kHz, 200KHz, 100KHz, 50KHz, 25KHz.
Works with TTL levels: low level from -0.5V to 0.8V and high level from 2V to 5.25V.

Digital benchtop multimeter for laboratories, to measure AC/DC current and voltage, resistance, capacitance, temperature, frequency, check continuity of circuits and diodes

Tin ideal for application in consumer electronics circuits
Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 0.5mm features:
- 100gr. 0,5mm diameter welding wire. 60% tin and 40% lead
- Melting temperature 183 o C / 190 o C
- Alloy Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit
- High quality - manufactured in EU

DT321B Digital Multimeter, Portable Multimeter, AC / DC Voltage Meter, Blue Backlight, Battery tester, Transistors tester, Acoustic Continuity Tester.

60/40 Tin Lead Solder Wire Soldering Flux Sn60/Pb40 2.5% 1mm 50g features:
- 50gr. 1mm diameter welding wire. 60% tin and 40% lead.
- Fusing temperature 183°C/190°C.
- Alloy: Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit

The new LCD display design provides a clearer screen and a better user experience.

The UT33 + series improves product safety standards, ensuring that users can work safely in the CAT II 600V environment.

Tin ideal for application in consumer electronics circuits.
Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 1.2mm features:
- 100gr. 1.2mm diameter welding wire
- 60% tin and 40% lead
- Fusing temperature 183 „ƒ / 190 „ƒ
- Alloy Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit
- High quality - manufactured in EU

Modern compact digital multimeter with large LCD display provides and enhanced user experience. Voltage / current / resistance / capacitance analysis as well as diode, transistor and continuity testing.

This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation.

Modern compact digital multimeter with large LCD display that provides a better user experience.

This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation.

Liquid Flux Alcohol Base TK83 100ml 
Flux liquid alcohol based for electronic welding. Type of flux: rosin
No Clean, Lead Free, Non-conductive. Ideally suited for manual tinning to restore solderability. Solids content 24%. max. soldering temperature 280ºC.

Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis,as well as diode, transistor and continuity tests.

This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation.

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 1mm 1.0 features:
- Material: Copper
- Length: 1.5m
- Width: 1.0mm
- Desoldering Braid Solder Remover Wick 1mm / 1.5m
- Pure copper braid construction
- Quick removal welding
- Excellent thermal for a faster and safer desoldering

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 1.5mm features:
- Material: Copper
- Length: 1.5m
- Width: 1.5mm
- Desoldering Braid Solder Remover Wick 1.5mm / 1.5m
- Pure copper braid construction
- Quick removal welding
- Excellent thermal for a faster and safer desoldering

Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests.

This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation.

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 2mm features:
- Material: Copper
- Length: 1.5m
- Width: 2mm

Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests.

This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation.

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 2.5mm features:
- Material: Copper
- Length: 1.5m
- Width: 2.5mm

Modern digital multimeter with large 4 digits LCD display that provides a better user experience. Voltage / current / resistance / capacitance / frecunecy analysis, as well as diode, transistor and continuity tests. Max. display 19999  4 ½ digits

This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation.

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 3mm features:
- Material: Copper
- Length: 1.5m
- Width: 3mm

The UT58 series is a safe and reliable hand-held digital multimeter that is easy to operate. Its large 60mm x 54mm LCD screen conveniently displays your measurement results. This series of digital multimeter caters to a variety of applications in the electrical and electronic fields

This modern and compact digital multimeter has a large 4-digit LCD display that offers a great experience to the user. Voltage / current / resistance / capacitance / frequency analysis, bem as diode and continuity test. Max. Digits: 1999 3 ½ digits

This multimeter meets IEC61010 standards: no pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation.

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 0.5mm features:
- Material: Copper
- Length: 1.5m
- Width: 0.5mm

UT100 series is specially designed for automobile diagnosis. Combines RPM, DWELL, and other multimeter functions. The series is useful for car maintenance personnel to diagnose traditional vehicles and hybrid electric vehicles. Applications: Its applications include working on fuses, switches, solenoids, relays, charging systems, fuel systems, engine detection, etc.

Tin ideal for application in consumer electronics circuits
Tin Roll 60/40 Sn/Pb 2.5% Flux 10g 1mm features:
- 10 gr. welding wire of 1 mm diameter. 60% tin, 40% lead
- Melting temperature 187/190 C
- Alloy Sn60Pb40
- Flux 2.5% SW26 1.1.2B ISO9454 - It is leaded alloy for manual and automatic processes where meeting the requirements of the RoHS2 Directive is not required.  - Quantity: 1 unit
- High quality - manufactured in EU

Tin ideal for application in consumer electronics circuits
Tin Roll 99.3/0.7 Sn/Cu 3% Flux 10g 1mm features:
- 10 gr. welding wire of 1 mm diameter. 99,3% tin, 0,5-0,9% copper and 0,07% lead
- Melting temperature 227 C
- Alloy Sn99Cu1
- Flux 3% Roma IPC-J-STD-004B, SW32 DIN8511  - RohS2 compliant  - Quantity: 1 unit
- High quality - manufactured in EU

Digital Multimeter 890c + Ammeter Voltmeter AC DC Ohm C Buzzer features:
- Uni-T M890C + Digital Multimeter LCD AC DC Voltmeter Ammeter
- Power supply: 9V battery
- Protection: F 250mA / 250V
- Display: LCD, range up to 1999 update: 2-3/s
- Method: double A / C slope
- Indication of exceeding the range: on the screen only by the number "1"
- Polarization of traffic for negative visualization "-"
- Operating temperature: 0 °C ~ 40 °C (32 °F ~ 104 °F)
- Storage temperature: -10 °C ~ 50 °C (10 °F ~ 122 °F)
- Flat battery signal: the screen shows "BAT"
- Dimensions: 170x87x35 mm
- Weight: 215g
- Sound traffic: YES (piezo) Specifications: - DCV: 200m-2-20-200-1000V ± 0.5%
- ACV: 2-20-200-750V ± 1.0%

Digital Multimeter 890c + Ammeter Voltmeter AC DC Ohm C Buzzer features:
- Uni-T M890C + Digital Multimeter LCD AC DC Voltmeter Ammeter
- Power supply: 9V battery
- Protection: F 250mA / 250V
- Display: LCD, range up to 1999 update: 2-3/s
- Method: double A / C slope
- Indication of exceeding the range: on the screen only by the number "1"
- Polarization of traffic for negative visualization "-"
- Operating temperature: 0 °C ~ 40 °C (32 °F ~ 104 °F)
- Storage temperature: -10 °C ~ 50 °C (10 °F ~ 122 °F)
- Flat battery signal: the screen shows "BAT"
- Dimensions: 170x87x35 mm
- Weight: 215g
- Sound traffic: YES (piezo) Specifications: - DCV: 200m-2-20-200-1000V ± 0.5%
- ACV: 2-20-200-750V ± 1.0%

Soldering Iron Cleaner with Brass Ball Holder features:
- Brass wire cleaner for solder tips with support
- It allows to remove the welding residues from the tips
- Cleans better and does not cause temperature drops as with sponges
- You do not need extra water to clean the tip
- Easy and effective cleaning at the tip
- Dimensions: diameter 50mm
- Support dimensions: 60x68mm

Digital Multimeter M830BUZ Voltmeter features:
- Uni-T M830BUZ Digital LCD Multimeter AC DC Voltmeter Ammeter
- Maximum voltage between terminals and physical earth: 600V
- Power supply: 9V battery
- Protection: F 250mA / 250V
- Display: LCD, range up to 1999 update: 2-3 / s
- Method: double A / C slope
- Indication of exceeding the range: on the screen only by the number "1"
- Polarization of traffic for negative visualization "-"
- Operating temperature: 0 ° C ~ 40 ° C (32 ° F ~ 104 ° F)
- Storage temperature: -10 ° C ~ 50 ° C (10 ° F ~ 122 ° F)
- Flat battery signal: the screen shows "BAT"
- Dimensions: 125x70x25 mm.
- Weight: 170 g.
- Dedicated connections: CAT II 600 V

It allows removing the solder residues from the tips.
It cleans better and does not cause temperature drops like with sponges.
You do not need extra water to clean the tip.
Easy and effective cleaning at the tip.
Soldering Tip Cleaning Ball features:
- Dimensions: diameter 50mm

The UNI-T UT300H temperature meter, which uses the latest technology, enables temperature measurements in the range of 32°C-42.9°C. The high accuracy of the device enables fast and accurate monitoring of body temperature as well as other environmental elements, e.g. objects, food, liquids, etc.

3x Long Life Soldering Iron Tips Replacement Ø 3.8mm features:
- Power: 40W
- Rod ø 3.80 mm
- Length 70 mm
- Long duration tip

The UNI-T UT300H temperature meter, which uses the latest technology, enables temperature measurements in the range of 32°C-42.9°C. The high accuracy of the device enables fast and accurate monitoring of body temperature as well as other environmental elements, e.g. objects, food, liquids, etc.

Long Life Replacement Tip Welder B11 Ø 3.8mm features:
- Power: 40W
- Rod ø 3.80mm
- Length 70 mm
- Long duration tip
- Quantity: 1 unit

Long Life Replacement Tip Welder B12 Ø 3.8mm 40W features:
  - Power: 40W
- Rod: ø 3.80mm
- Length: 70 mm
- Long duration tip
- Quantity: 1 unit

This connector is widely used in thermocouple and RTD circuits, giving a fast and good contact solution. It is designed with a good insulation, metal pins, its construction ensures a good contact.