Kapton type 10mm thermal tape Characteristic: - Supports up to 280ºC - Electrical and antistatic insulation - Resistant to acid and alkaline products - Resistant to solvent - Adhesive - Length Approx: 33m - Polyamide adhesive tape 10mm - Known as Kapton polyamide tape - Product for welding works on those that need to protect some component from the heat Code I0061 Available Price €2.15
Cutting Pliers 130mm Cutting Pliers 130mm features: - This model is not isolated, please use it without current- Use to cut soft materials, electronic components, cables, plastic card- Can also be used for welding work Code H0051 Available Price €4.29
IR Remote Control + IR Infrared Receiver VS1838 IR Remote Control + IR Infrared Receiver VS1838 features: - The test distance is about 5-8 meters, but practical application depends on environmental factors (such as diaphragm, glass , obstructions or other material blockage) - The CHQ1838 / HX1838 receiver receives the 38kHz signal - Vcc supply: 3.3V-5V - IN digital output to connect to the port Arduino I / O - Remote measurements 85x 40x 5mm - Includes battery Useful links for Arduino / Raspberry programming and projects with Arduino boards / Raspberry: Send / Receive information via IR - Wiring of the IR Remote control + Infrared IR Receiver VS1838 with the UNO module - Light a 3mm red LED by Infrared Code W0021 Available Price €2.49
10x Linear Potentiometers 10k OHM kΩ 10x Linear Potentiometers 10k OHM kΩ features:- Horizontal variable resistance PCB- 10k Ohm kΩ Linear- Quantity: 10 units Code K0062 Available Price €0.21
Ramps 1.6 Reprap - Arduino Mega Pololu Shield RepRap Arduino Mega Pololu Shield (RAMPS) version 1.6 for 3D printer. Updated 4-layer PCB control panel motherboard with 5-piece DRV8825 driver for 3D printer. Includes heatsink and jumpers. RAMPS board is a shield for the Arduino Mega2560. The outputs of the Arduino board are redirected to the motor drivers. To have the complete electronics for a 3D printer you need a RAMPS, an Arduino Mega and at least four stepper motor drivers A4988, DRV8825. Code I0194 ✗ Out-of-Stock Price €9.90
Potentiometer B10K linear Characteristic: -10k OHM kΩ - linear potentiometer 10k Arduino -Tolerance: +/- 20% - Power: 0.125W Code K0067 Available Price €0.99
2x Insulation Tapes PVC Black 10m x 15mm x 0.13mm 2x Insulation Tapes PVC Black 10m x 15mm x 0.13mm features:- PVC insulating tape with adhesive- Thickness of 0.13 mm- Measures 10m x 15mm- Quantity: 2 units- Heat resistance: 80°C Code H0031 Available Price €0.99
Infrared LED Flame Sensor 5mm module Led module infrared sensor for ArduinoDetector of the source of fire or flame, can detect a flame or wavelength 760 nm-1100 nmParticularly sensitive to the flame spectrum.This optical flame sensor is a device that detects the existence of combustion by the light emitted by it. Infrared LED Flame Sensor 5mm module features:- 4 Pins Output: - A0: analog output - D0: digital output - GND: ground connection - VCC: 5V module power- Range of light, Distance of 80 cm.- Angle detection of about 60 degrees,- This light can be detected by an optical sensor,- Can be captured by digital inputs and analog inputs of Arduino. Code S0133 Available Price €1.39
Hantek 1008C PC Oscilloscope USB 8 Channel Automotive Diagnostic DAQ 8-channel oscilloscope for vehicle testing. More than 80 kinds of automotive diagnostic functions (ignition detection / sensor / bus detection / performance / starting and charging circuits , etc.). The video help function provides the diagnostic video help that can be viewed online. The diagnostic result can be generated a diagnostic report, printed or taken a screenshot by pressing a key, many methods to save the data. Supported for recording waveform for a long time. You can simulate the camshaft and crankshaft signal. Transmit signals through the USB 2.0 plug and play interface, and requires no additional power supply; Key Hantek 1008C PC Oscilloscope USB 8 Channel Automotive Diagnostic DAQ features: Code K0234 Available Price €117.90
Laser Level Uni-T LM570R-I The LM570R-I laser spirit level is a handy tool used in the construction industry for horizontal and vertical levelling. The 10mW red laser is ideal for projects requiring accurate levelling in a two-dimensional area. Code H0580 Last items in stock Regular price €39.95 -€5.96 Price €33.99
Non-contact temperature measuring thermometer Uni-T UT300H The UNI-T UT300H temperature meter, which uses the latest technology, enables temperature measurements in the range of 32°C-42.9°C. The high accuracy of the device enables fast and accurate monitoring of body temperature as well as other environmental elements, e.g. objects, food, liquids, etc. Code H0313 Last items in stock Regular price €34.50 -€4.55 Price €29.95
Hantek 20:1 attenuator - suitable for passive signal attenuation of a 1008C HT201 20:1 oscilloscope 300V Max This attenuator allows the oscilloscope to measure the fuel injector and primary ignition waveforms. Passive attenuator with a 20:1 attenuation Therefore, if a 20V signal is introduced, it will emit a 1V signal. Using this element, the oscilloscope can measure voltage higher than its range (*20V) Code H0211 Available Price €10.99
Power supply ZL305 30V / 5A Stabilized laboratory power supply with smoothly adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5A. The power supply is fan cooled which allows the power supply to work in constant mode. Code H0306 ✗ Out-of-Stock Price €64.99
Hantek Oscilloscope 6022BL USB 2 channel 20MHz Highly efficient and cost-effective oscilloscope with 2 channels. The high quality anodized aluminum case. The bandwidth is 20 MHz and the sampling rate is 48 MSa / s. Hantek Oscilloscope 6022BL USB 2 channel 20MHz features: 16-channel logic analyzer, 20MHz bandwidth. Operating system: Windows 7, Windows NT, Windows XP, Windows Vista. More than 20 kinds of automatic measurement functions. Intensity, inversion, addition, subtraction, multiplication, division, XY. Save the waves that appear on screen in JPG / BMP or excel formats. FFT spectrum analysis function. One computer can connect to many DSOs, the channel can be easily extended. Specifications: Inputs: 2 channels. Bandwidth: 20 MHz. Code K0049 Last items in stock Price €98.90
Wind meter with temperature measurement function Uni-T UT363 UT363 mini wind speed and temperature meters. UT363 measures wind speeds up to 30 m/s (108 km/h) Code H0563 ✗ Out-of-Stock Price €29.49
Digital non-contact laser tachometer RPM DT2234A Instrument that measures the speed of rotation with a visible red light beam from a powerful LED. The high intensity class II laser measures wide measurement range and high resolution, from 2.5 to 99.999 RPM (Revolutions per Minute) Code H0299 Last items in stock Price €12.49
Logic Analyzer 8-Channel 24MHz USB SALEAE is an 8-channel logic analyzer without memory, a maximum sampling speed of 24MHz (depends on the PC and the use of the USB bus).It allows you to record and display digital data read on the computer.Logic Analyzer 8-Channel 24MHz features:- 8 channels- 24MHz sampling frequency- 1000M samples- USB power- USB 2.0 HiSpeed- 5V supply voltage- LED - power indicator- LED - logic indicator 0-1 on channel 1- USB connectionYou can change the sampling frequency by hand: 24MHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500kHz, 250kHz, 200KHz, 100KHz, 50KHz, 25KHz.Works with TTL levels: low level from -0.5V to 0.8V and high level from 2V to 5.25V. Code K0080 Available Price €8.49
Digital Clamp Meters Uni-T UT202A+ The digital clamp meters are designed according to EN61010-2010 CAT II 600V/CAT III 300V, with overload protection, high reliability, high safety and high accuracy. These meters can be used to measure high voltage frequency, AC/DC current, etc. Code H0569 Last items in stock Price €34.95
Hantek 1008C PC Oscilloscope USB 8 Channel Automotive Diagnostic DAQ 8-channel oscilloscope for vehicle testing. More than 80 kinds of automotive diagnostic functions (ignition detection / sensor / bus detection / performance / starting and charging circuits , etc.). The video help function provides the diagnostic video help that can be viewed online. The diagnostic result can be generated a diagnostic report, printed or taken a screenshot by pressing a key, many methods to save the data. Supported for recording waveform for a long time. You can simulate the camshaft and crankshaft signal. Transmit signals through the USB 2.0 plug and play interface, and requires no additional power supply; Key Hantek 1008C PC Oscilloscope USB 8 Channel Automotive Diagnostic DAQ features: Code K0234 Available Price €117.90
Laser Level Uni-T LM570R-I The LM570R-I laser spirit level is a handy tool used in the construction industry for horizontal and vertical levelling. The 10mW red laser is ideal for projects requiring accurate levelling in a two-dimensional area. Code H0580 Last items in stock Regular price €39.95 -€5.96 Price €33.99
Non-contact temperature measuring thermometer Uni-T UT300H The UNI-T UT300H temperature meter, which uses the latest technology, enables temperature measurements in the range of 32°C-42.9°C. The high accuracy of the device enables fast and accurate monitoring of body temperature as well as other environmental elements, e.g. objects, food, liquids, etc. Code H0313 Last items in stock Regular price €34.50 -€4.55 Price €29.95
Hantek 20:1 attenuator - suitable for passive signal attenuation of a 1008C HT201 20:1 oscilloscope 300V Max This attenuator allows the oscilloscope to measure the fuel injector and primary ignition waveforms. Passive attenuator with a 20:1 attenuation Therefore, if a 20V signal is introduced, it will emit a 1V signal. Using this element, the oscilloscope can measure voltage higher than its range (*20V) Code H0211 Available Price €10.99
Power supply ZL305 30V / 5A Stabilized laboratory power supply with smoothly adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5A. The power supply is fan cooled which allows the power supply to work in constant mode. Code H0306 ✗ Out-of-Stock Price €64.99
Hantek Oscilloscope 6022BL USB 2 channel 20MHz Highly efficient and cost-effective oscilloscope with 2 channels. The high quality anodized aluminum case. The bandwidth is 20 MHz and the sampling rate is 48 MSa / s. Hantek Oscilloscope 6022BL USB 2 channel 20MHz features: 16-channel logic analyzer, 20MHz bandwidth. Operating system: Windows 7, Windows NT, Windows XP, Windows Vista. More than 20 kinds of automatic measurement functions. Intensity, inversion, addition, subtraction, multiplication, division, XY. Save the waves that appear on screen in JPG / BMP or excel formats. FFT spectrum analysis function. One computer can connect to many DSOs, the channel can be easily extended. Specifications: Inputs: 2 channels. Bandwidth: 20 MHz. Code K0049 Last items in stock Price €98.90
Wind meter with temperature measurement function Uni-T UT363 UT363 mini wind speed and temperature meters. UT363 measures wind speeds up to 30 m/s (108 km/h) Code H0563 ✗ Out-of-Stock Price €29.49
Digital non-contact laser tachometer RPM DT2234A Instrument that measures the speed of rotation with a visible red light beam from a powerful LED. The high intensity class II laser measures wide measurement range and high resolution, from 2.5 to 99.999 RPM (Revolutions per Minute) Code H0299 Last items in stock Price €12.49
Logic Analyzer 8-Channel 24MHz USB SALEAE is an 8-channel logic analyzer without memory, a maximum sampling speed of 24MHz (depends on the PC and the use of the USB bus).It allows you to record and display digital data read on the computer.Logic Analyzer 8-Channel 24MHz features:- 8 channels- 24MHz sampling frequency- 1000M samples- USB power- USB 2.0 HiSpeed- 5V supply voltage- LED - power indicator- LED - logic indicator 0-1 on channel 1- USB connectionYou can change the sampling frequency by hand: 24MHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500kHz, 250kHz, 200KHz, 100KHz, 50KHz, 25KHz.Works with TTL levels: low level from -0.5V to 0.8V and high level from 2V to 5.25V. Code K0080 Available Price €8.49
Digital Clamp Meters Uni-T UT202A+ The digital clamp meters are designed according to EN61010-2010 CAT II 600V/CAT III 300V, with overload protection, high reliability, high safety and high accuracy. These meters can be used to measure high voltage frequency, AC/DC current, etc. Code H0569 Last items in stock Price €34.95