Hantek CC-65 BNC Clamp (65A) This Hantek CC-65 clamp is a special accessory for oscilloscope by means of BNC connector, which allows to measure the parameters and current waveforms. Its current transducer linearly transforms AC or DC current into AC or DC current voltage. By connecting the current clamp to an oscilloscope, the waveform of the current signal can be observed. Code H0240 Available Regular price €91.90 -€2.00 Price €89.90
CMOS TTL logic tester With the logic signal state tester it is possible to detect 0, 1, high impedance states. The indication reading is displayed by means of LEDs. The supply voltage is 5-15V. Code K0556 Last items in stock Price €15.95
FDY10-S Battery Tester, Charge and Discharge Time Meter FDY10-S is a new measuring device with integrated double function, detection and measurement.During discharge, the LED shows the voltage, the current, the power in real time. After completing the battery discharge, it will display the results of the measurement, such as the download time.The host and the heating elements are separated, high stability.The measurement error is minimal and the most accurate results are due to the application of the measurement mode of the 4-wire system.Availability to configure the automatic slide show function to verify visually and clearly the operating states and parameters, due to the display mode based on the combination of the LED indicator light.Operation sound indication and alarm for the end of the discharge. Code H0140 Last items in stock Regular price €65.95 -€10.00 Price €55.95
Wind meter with temperature measurement function Uni-T UT363 UT363 mini wind speed and temperature meters. UT363 measures wind speeds up to 30 m/s (108 km/h) Code H0563 ✗ Out-of-Stock Price €29.49
Universal LCD Digital Multimeter UNI-T UT52 - Red Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0206 ✗ Out-of-Stock Price €34.90
Uni-T UTP1305 Laboratory Power Supply The UTP1300 series are single channel linear DC power supplies with low ripple / noise, overload protection and constant voltage / current characteristics. Maximum power: 300 W Adjustable voltage and current Code H0318 Last items in stock Price €129.00
Distance Meter UNI-T LM20m Super simple laser distance meter with a range of 20 metres and high accuracy. Functions: automatic switch-off single measurement laser pointer Code H0308 Last items in stock Regular price €23.00 -€3.00 Price €20.00
Distance Meter UNI-T LM60 Simple laser distance meter with a range of 60 metres. The LM series laser distance meters are portable devices that can easily and accurately measure length, area and volume at the push of a button. Code H0309 Last items in stock Regular price €49.00 -€4.05 Price €44.95
Digital non-contact laser tachometer RPM DT2234A Instrument that measures the speed of rotation with a visible red light beam from a powerful LED. The high intensity class II laser measures wide measurement range and high resolution, from 2.5 to 99.999 RPM (Revolutions per Minute) Code H0299 Last items in stock Price €12.49
HanteK PP-150 / 5MHz-100MHz - Oscilloscope clamp test probe kit - 10:1 and 1:1 attenuation ratio Test probe for oscilloscope, kit with all the material as spare part or additional cable. Ergonomic clamp with x10 or normal x1 attenuation. Code H0212 Available Regular price €12.00 -€1.00 Price €11.00
Power socket tester with RCD test function Uni-T UT07B-EU The UT-07B-EU tester indicates the correct connection of L, N, PE cables in a socket. It also has a function to check the efficiency of residual current devices (RCD). The device is made of resistant plastic, which is very useful during installation work and ensures long-lasting correct operation. Attention! The RCD check is only possible if the phase is on the right-hand side. Code H0564 Available Price €14.95
Digital non-contact laser tachometer RPM DT2234A Instrument that measures the speed of rotation with a visible red light beam from a powerful LED. The high intensity class II laser measures wide measurement range and high resolution, from 2.5 to 99.999 RPM (Revolutions per Minute) Code H0299 Last items in stock Price €12.49
Power supply ZL305 30V / 5A Stabilized laboratory power supply with smoothly adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5A. The power supply is fan cooled which allows the power supply to work in constant mode. Code H0306 ✗ Out-of-Stock Price €64.99
Digital luxmeter UNIT UT383S Ambient light sensor meter, with a measuring range of 0-199990 Lux. Widely used in agriculture, laboratories, offices and more industrial sectors. Code H0562 Last items in stock Regular price €37.90 -€2.50 Price €35.40
Temperature and humidity meter Uni-T UT333S The UT333S is a digital temperature and humidity meter with stable, safe and reliable performance in a split design. The split design is ideal for monitoring small and difficult to access air ducts. Measure temperature and humidity in real time with the best UNIT technology! Code H0361 Last items in stock Price €34.90
Power supply 30V 5A UNI-T UTP3315TFL Stabilized power supply with adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5 A. The fan cools the power supply and can operate in constant mode. Power supply 30V 5A UNI-T UTP3315TFL features: - Input voltage: 230VAC - Output voltage: 0-30V adjustable - Output current: 0-5A adjustable - Backlit display - Protection against over-consumption and short circuit - Cooled by fan - Includes crocodile clip cables Uni-T UTP3315TFL datasheet Load Regulation Voltage & lt; = 0.01% + 3mV Current & lt; = 0.2% + 3mA Line Regulation Voltage & lt; = 0.01% + 3mV Current & lt; = 0.1% + 5mA Ripple and Noise Voltage 1mV rms Current 3mA rms Code H0181 Last items in stock Price €119.50
Digital Multimeter Uni-T UT39C Modern compact digital multimeter with large LCD display that provides a better user experience. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0203 ✗ Out-of-Stock Price €23.90
UNI-T UT12D - Voltage detector non-contact test pen Test pen for non-contact voltage detection with LED torch and buzzer. Allows to differentiate between different lines of alternating current. AC voltage detection range is 24-1000V Code H0210 Available Regular price €10.89 -€2.00 Price €8.89
Digital Car Multimeter LCD UNI-T UT107 Red UT100 series is specially designed for automobile diagnosis. Combines RPM, DWELL, and other multimeter functions. The series is useful for car maintenance personnel to diagnose traditional vehicles and hybrid electric vehicles. Applications: Its applications include working on fuses, switches, solenoids, relays, charging systems, fuel systems, engine detection, etc. Code H0209 Last items in stock Regular price €34.90 -€2.00 Price €32.90
HanteK PP-150 / 5MHz-100MHz - Oscilloscope clamp test probe kit - 10:1 and 1:1 attenuation ratio Test probe for oscilloscope, kit with all the material as spare part or additional cable. Ergonomic clamp with x10 or normal x1 attenuation. Code H0212 Available Regular price €12.00 -€1.00 Price €11.00