HanteK PP-150 / 5MHz-100MHz - Oscilloscope clamp test probe kit - 10:1 and 1:1 attenuation ratio

This Hantek CC-65 clamp is a special accessory for oscilloscope by means of BNC connector, which allows to measure the parameters and current waveforms. Its current transducer linearly transforms AC or DC current into AC or DC current voltage. By connecting the current clamp to an oscilloscope, the waveform of the current signal can be observed.

Digital Multimeter 890c + Ammeter Voltmeter AC DC Ohm C Buzzer features:
- Uni-T M890C + Digital Multimeter LCD AC DC Voltmeter Ammeter
- Power supply: 9V battery
- Protection: F 250mA / 250V
- Display: LCD, range up to 1999 update: 2-3/s
- Method: double A / C slope
- Indication of exceeding the range: on the screen only by the number "1"
- Polarization of traffic for negative visualization "-"
- Operating temperature: 0 °C ~ 40 °C (32 °F ~ 104 °F)
- Storage temperature: -10 °C ~ 50 °C (10 °F ~ 122 °F)
- Flat battery signal: the screen shows "BAT"
- Dimensions: 170x87x35 mm
- Weight: 215g
- Sound traffic: YES (piezo) Specifications: - DCV: 200m-2-20-200-1000V ± 0.5%
- ACV: 2-20-200-750V ± 1.0%

Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis,as well as diode, transistor and continuity tests.

This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation.

USB SALEAE is an 8-channel logic analyzer without memory, a maximum sampling speed of 24MHz (depends on the PC and the use of the USB bus).
It allows you to record and display digital data read on the computer.
Logic Analyzer 8-Channel 24MHz features:
- 8 channels
- 24MHz sampling frequency
- 1000M samples
- USB power
- USB 2.0 HiSpeed
- 5V supply voltage
- LED - power indicator
- LED - logic indicator 0-1 on channel 1
- USB connection
You can change the sampling frequency by hand: 24MHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500kHz, 250kHz, 200KHz, 100KHz, 50KHz, 25KHz.
Works with TTL levels: low level from -0.5V to 0.8V and high level from 2V to 5.25V.

UT100 series is specially designed for automobile diagnosis. Combines RPM, DWELL, and other multimeter functions. The series is useful for car maintenance personnel to diagnose traditional vehicles and hybrid electric vehicles. Applications: Its applications include working on fuses, switches, solenoids, relays, charging systems, fuel systems, engine detection, etc.

DT321B Digital Multimeter, Portable Multimeter, AC / DC Voltage Meter, Blue Backlight, Battery tester, Transistors tester, Acoustic Continuity Tester.

Ambient light sensor meter, with a measuring range of 0-199990 Lux. Widely used in agriculture, laboratories, offices and more industrial sectors.

UT363 mini wind speed and temperature meters. UT363 measures wind speeds up to 30 m/s (108 km/h)

DDS UNI-T UTG932E 2-channel signal generator can generate sine wave, square wave, triangle wave, pulse wave and arbitrary wave, etc. The maximum output frequency of sine wave is 30MHz, sampling rate of 200 MSa/s.

The JDS6600 series DDS signal generator can generate sine waves, square waves, triangle waves, pulse waves and arbitrary waves, etc. The frequency will be up to 15MHz. And it has duty cycle correction, amplitude modulation function and frequency sweep function etc. It can display output signal, amplitude and frequency at the same time. This series has amplitude frequency characteristics, and the appearance is very delicate and beautiful. It can be applied in factories, schools, research institutes and laboratories. There are 5 models, JDS6600-60M, JDS6600-50M, JDS6600-40M, JDS6600-30M and JDS6600-15M. The main difference is the maximum sine wave output frequency. JDS6600 -15MHZ is the maximum output frequency of the sine wave.