Tin Roll 60/40 Sn/Pb 2.5% Flux 10g 1mm

The optical module sensor (reflective) with comparator LM393, which detects obstacles with high precision.
The ideal obstacle detection detector for the installation of smart robots.
TCRT5000 - reflective optical sensor that has a compact construction where the light emitter and receiver are placed in the same direction to detect the presence of a object using infrared reflection on the object.
The working wavelength is 950nm.
The transmitter is infrared LED and the phototransistor receiver.
By using LM393 comparator the module has a binary output (D0) that is at level 1 (object is detected).
The sensor allows the detection of an object at a distance of up to 12 mm.

10x Female-Male Cables 20cm Jumpers Dupont features:
-Length: 20cm
-Quantity: 10 cables
-Connectors have male and female header contacts at either end
-Compatible with male and female connectors 2,54mm
-High quality and good working conditions
-Easy to install and use

Resistencias (510 Ohm) de tolerancia de 0.05 y potencia de 0,25W. En el carbon film.

- This module includes PA preamplifier and LNA (Low-noise amplifier)
- Comes with the SMA antenna for 2.4GHz (2dB)
- Outdoor - transmission up to 250kbps and a distance of up to 1 kilometer
- Works at 2.4GHz frequencies (free frequency) and is ideal for telemetry projects, robots, peripherals control, video game control applications, remote temperature sensors, pressure, alarms, etc ... NRF24L01 + Wireless Antenna Transceiver 2.4 GHz 1Km PA LNA features:
* Based on chip NRF24L01 +
* Free band: 2.4GHz ISM
* Speed: 250kbps, 1Mbps, 2Mbps
* Work current
- Reception: 45 mA
- Transmission: 115 mA (4.2uA -sleep mode)
* Receiving sensitivity:
-104dB 250kbps
- 95dB 1Mbps
- 92dB 2Mbps
* SPI interface

Power Supply Transformer 220V AC/DC 1A 5V features:
- Input voltage: 100~240V 50Hz
- Output voltage: DC 5V
- Output current: 1A
- DC connector: 5.5 mm x 2.1 mm
- Cable length: Approx. 90 cm
- Indicator of operation: LED diode

M12 Inductive Proximity Sensor PNP DC 6-36V LJ12A3-4-Z/BY 3D Printer features:
- This sensor can be configured as auto Z axis level
- Sensor detection switch inductive proximity LJ12A3-4-Z / BY
- PNP DC6-36V
- Often used for 3D printer bed leveling
- Typical application: printer bed level sensor 3D
- Cylindrical cable type DC 3 cable type (black, brown, blue)
- Inductive sensor type
- PNP NO (Normal Open)
- Detecting Distance 4mm - DC supply voltage 6-36V
- Current output 300mA
- Response frequency 0.5KHz
- Detects iron / aluminum
- Operating temperature -25 ° C at + 55 ° C (Non-freezing condition)
- Head diameter 12 mm
- Size 6.2 x 2cm
- Cable length 100cm

Silicone and Protective Grease with Teflon 20g features:
- Protects against weathering
- Preserves surfaces, rubber, plastics
- Covers a wide range of operating temperatures: from -40°C to 260°C
- Silicone and Protective Grease with Teflon 20g features:
a very good chemical resistance to oxidation
- Water solutions of acids, bases, sulfur dioxide, ammonia
- Applications: audio equipment

Connector BLS03 Female/Female 3 Pins RoHS Single Row features:
- Step between pins: 2.54 mm
- Manufacturer: Maritex
- Number of connections: 3 in a single row
- Type: Female / Female
- RoHS standard