300 Pieces LED Diodes 3mm 5mm red green yellow blue white Set of 300 diodes packed in a handy box. Lens colour: red, green, yellow, yellow, blue - diffuse, light white. Code P0104 Available Regular price €7.95 -€1.46 Price €6.49
HanteK PP-150 / 5MHz-100MHz - Oscilloscope clamp test probe kit - 10:1 and 1:1 attenuation ratio Test probe for oscilloscope, kit with all the material as spare part or additional cable. Ergonomic clamp with x10 or normal x1 attenuation. Code H0212 Available Price €12.00
Screw Shield V1 for Arduino UNO y MEGA Screw Shield V1- Arduino ScrewShield UNO y MEGA features: Screw Shield V1 allows: - Being punctured directly to an Arduino Uno, Mega, Leonardo plate- Facilitate the connection of different modules, such as sensors, relays, servos, buttons, potentiometers and more. Code M0173 Available Price €3.95
Timer Relay Module FRM01 The multifunctional relay control module, FRM01, is designed for customers with different synchronization and control needs.The FRM01 is controlled by the STM8S003F3P6 microcontroller and has 18 different functions.Each function can be customized to meet customer needs in a variety of time and power control applications.The FRM01 is equipped with a high-quality power relay, a high-power voltage transistor, red and blue LED indicators, an LED display on a double-sided PCB board.The output of the board is driven by a high quality power relay capable of controlling the AC and DC loads. Timer Relay Module FRM01 features: - Operating voltage: 12 VDC- 4 buttons: SET, SWI, NUM +, NUM-- Operating temperature: -20 °C - + 60 °C Code M0159 Available Regular price €9.95 -€2.00 Price €7.95
8A DC Downstream Converter 8-40V to 1.25-35V Current Control XL4016 A high-performance regulator-booster. 24V battery charger - DC / CV method. Power supply of the laptop from a 12V car battery. A high-performance dimmer-regulator. Charger for Li-Ion, Li-Po batteries etc. - CC / CV method. LED Constant current driver for LED diodes. Characteristic: - Input voltage: 6V -40V - Output voltage: 1.25-35V (adjustable) - Output current: 8A, (10A maximum) - Output power: 300W maximum - Efficiency of Conversion: up to 95% - Wiring: Solderless terminal - Operating frequency: 300kHz - Ambient temperature exceeds 40 ° C, increase heat dissipation - LED indicator two-color; - Charge red - Fully charged light green - No charge green Code A0011 Available Price €7.95
LEONARDO R3 ATmega32u4 board + Arduino compatible USB cable It has an Atmega32u4 chip running at 16Mhz with a factory-loaded bootloader. The Leonardo module has all the connectors that the Arduino Leonardo R3 and is compatible with all Arduino shields. LEONARDO R3 ATmega32u4 board + Arduino compatible USB cable features: - ATmega32u4 microcontroller, - Operating voltage 5V, - Power (recommended) 7-12V, - Digital pins I / O 20 (of which 7 can be used as PWM outputs), - Analog input pins 12, - DC current through I / O Pin 40 mA, - DC current for pin 3.3V 50 mA, - Flash memory 32 KB (of which 4 KB are used by the bootloader), - SRAM 2.5 KB, - EEPROM 1 KB, - Clock speed 16 MHz, - Interface: UART, USB, SPI, I2C, - USB communication - Atmega32u4, Code B0004 Available Regular price €10.90 -€2.00 Price €8.90
TDA2030A 1X18W Audio Amplifier TDA2030A 1X18W Audio Amplifier features: - Chip: TDA2030A - Power supply: DC 6V ~ 12V - Channel type: Single channel - Output power: 1 x 18 W - Output output: 4 ~ 8 Ohm - Mono mode - Size (LxWxH): 31.6 x 23.5 mm Code M0063 ✗ Out-of-Stock Price €3.39
2.4 inch TFT LCD screen 240x320 SPI LCD TFT Display Module 240x320 2.4 SPI features: - LCD screen TFT 240x320 pixels- 262,000 possible colors (18 bit)- Pixel: RGB vertical band- Driver ILI9341- SPI interface- 8-bit digital interface, 4-bit control lines- Resistive touch screen 4 - cables- Ideal for projects with ARDUINO, Uno R3, MEGA2560 Helpful Links: Wiring of the TFT LCD screen 2.4 SPI - Connect the TFT 2.4 SPI LCD screen with the UNO module Display graphics and texts on the LCD TFT screen 2.4 SPI Program a touch calculator on the LCD screen TFT 2.4 SPI Code P0001 Available Price €11.95
Power supply ZL305 30V / 5A Stabilized laboratory power supply with smoothly adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5A. The power supply is fan cooled which allows the power supply to work in constant mode. Code H0306 Last items in stock Price €64.99
Universal LCD Digital Multimeter UNI-T UT52 - Red Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0205 Available Price €31.99
Digital Multimeter UT890d+ Ammeter Voltmeter NCV True RMS Line wire test Digital Multimeter 890c + Ammeter Voltmeter AC DC Ohm C Buzzer features: - Uni-T M890C + Digital Multimeter LCD AC DC Voltmeter Ammeter- Power supply: 9V battery- Protection: F 250mA / 250V- Display: LCD, range up to 1999 update: 2-3/s- Method: double A / C slope- Indication of exceeding the range: on the screen only by the number "1"- Polarization of traffic for negative visualization "-"- Operating temperature: 0 °C ~ 40 °C (32 °F ~ 104 °F)- Storage temperature: -10 °C ~ 50 °C (10 °F ~ 122 °F)- Flat battery signal: the screen shows "BAT"- Dimensions: 170x87x35 mm- Weight: 215g- Sound traffic: YES (piezo) Specifications: - DCV: 200m-2-20-200-1000V ± 0.5%- ACV: 2-20-200-750V ± 1.0% Code H0332 Available Price €37.50
Hantek Oscilloscope UNI-T UTD2102CL+ 2 channel 100MHz UNI-T UTD2102CL+ Dual Channels Digital Storage Osciloscopio con 100MHz, 500MSa/s, 5000 wfms/s Code K0594 Last items in stock Price €295.00
Hantek Oscilloscope 6022BL USB 2 channel 20MHz Highly efficient and cost-effective oscilloscope with 2 channels. The high quality anodized aluminum case. The bandwidth is 20 MHz and the sampling rate is 48 MSa / s. Hantek Oscilloscope 6022BL USB 2 channel 20MHz features: 16-channel logic analyzer, 20MHz bandwidth. Operating system: Windows 7, Windows NT, Windows XP, Windows Vista. More than 20 kinds of automatic measurement functions. Intensity, inversion, addition, subtraction, multiplication, division, XY. Save the waves that appear on screen in JPG / BMP or excel formats. FFT spectrum analysis function. One computer can connect to many DSOs, the channel can be easily extended. Specifications: Inputs: 2 channels. Bandwidth: 20 MHz. Code K0049 Last items in stock Price €98.90
Hantek CC-65 BNC Clamp (65A) This Hantek CC-65 clamp is a special accessory for oscilloscope by means of BNC connector, which allows to measure the parameters and current waveforms. Its current transducer linearly transforms AC or DC current into AC or DC current voltage. By connecting the current clamp to an oscilloscope, the waveform of the current signal can be observed. Code H0240 Available Price €91.90
Logic Analyzer 8-Channel 24MHz USB SALEAE is an 8-channel logic analyzer without memory, a maximum sampling speed of 24MHz (depends on the PC and the use of the USB bus).It allows you to record and display digital data read on the computer.Logic Analyzer 8-Channel 24MHz features:- 8 channels- 24MHz sampling frequency- 1000M samples- USB power- USB 2.0 HiSpeed- 5V supply voltage- LED - power indicator- LED - logic indicator 0-1 on channel 1- USB connectionYou can change the sampling frequency by hand: 24MHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500kHz, 250kHz, 200KHz, 100KHz, 50KHz, 25KHz.Works with TTL levels: low level from -0.5V to 0.8V and high level from 2V to 5.25V. Code K0080 Available Price €8.49
Universal LCD Digital Multimeter UNI-T UT52 - Red Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0206 Backorder Price €34.90
RJ-45, RJ11, RJ12 network cable tester The tester is designed to test RJ45 network cabling: UTP, FTP, STP and telephone cables: RJ11 and RJ12. 8 LEDs for testing each individual conductor of an RJ twisted pair (cable is connected correctly when parallel LEDs 1-1 to 8-8 light up simultaneously). Code H0317 Price €5.49
Non-contact temperature measuring thermometer Uni-T UT300H The UNI-T UT300H temperature meter, which uses the latest technology, enables temperature measurements in the range of 32°C-42.9°C. The high accuracy of the device enables fast and accurate monitoring of body temperature as well as other environmental elements, e.g. objects, food, liquids, etc. Code H0313 Available Price €34.50
Power supply ZL305 30V / 5A Stabilized laboratory power supply with smoothly adjustable voltage in the range of 0 to 30 volts and current in the range of 0 to 5A. The power supply is fan cooled which allows the power supply to work in constant mode. Code H0306 Last items in stock Price €64.99
Universal LCD Digital Multimeter UNI-T UT52 - Red Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0205 Available Price €31.99
Digital Multimeter UT890d+ Ammeter Voltmeter NCV True RMS Line wire test Digital Multimeter 890c + Ammeter Voltmeter AC DC Ohm C Buzzer features: - Uni-T M890C + Digital Multimeter LCD AC DC Voltmeter Ammeter- Power supply: 9V battery- Protection: F 250mA / 250V- Display: LCD, range up to 1999 update: 2-3/s- Method: double A / C slope- Indication of exceeding the range: on the screen only by the number "1"- Polarization of traffic for negative visualization "-"- Operating temperature: 0 °C ~ 40 °C (32 °F ~ 104 °F)- Storage temperature: -10 °C ~ 50 °C (10 °F ~ 122 °F)- Flat battery signal: the screen shows "BAT"- Dimensions: 170x87x35 mm- Weight: 215g- Sound traffic: YES (piezo) Specifications: - DCV: 200m-2-20-200-1000V ± 0.5%- ACV: 2-20-200-750V ± 1.0% Code H0332 Available Price €37.50
Hantek Oscilloscope UNI-T UTD2102CL+ 2 channel 100MHz UNI-T UTD2102CL+ Dual Channels Digital Storage Osciloscopio con 100MHz, 500MSa/s, 5000 wfms/s Code K0594 Last items in stock Price €295.00
Hantek Oscilloscope 6022BL USB 2 channel 20MHz Highly efficient and cost-effective oscilloscope with 2 channels. The high quality anodized aluminum case. The bandwidth is 20 MHz and the sampling rate is 48 MSa / s. Hantek Oscilloscope 6022BL USB 2 channel 20MHz features: 16-channel logic analyzer, 20MHz bandwidth. Operating system: Windows 7, Windows NT, Windows XP, Windows Vista. More than 20 kinds of automatic measurement functions. Intensity, inversion, addition, subtraction, multiplication, division, XY. Save the waves that appear on screen in JPG / BMP or excel formats. FFT spectrum analysis function. One computer can connect to many DSOs, the channel can be easily extended. Specifications: Inputs: 2 channels. Bandwidth: 20 MHz. Code K0049 Last items in stock Price €98.90
Hantek CC-65 BNC Clamp (65A) This Hantek CC-65 clamp is a special accessory for oscilloscope by means of BNC connector, which allows to measure the parameters and current waveforms. Its current transducer linearly transforms AC or DC current into AC or DC current voltage. By connecting the current clamp to an oscilloscope, the waveform of the current signal can be observed. Code H0240 Available Price €91.90
Logic Analyzer 8-Channel 24MHz USB SALEAE is an 8-channel logic analyzer without memory, a maximum sampling speed of 24MHz (depends on the PC and the use of the USB bus).It allows you to record and display digital data read on the computer.Logic Analyzer 8-Channel 24MHz features:- 8 channels- 24MHz sampling frequency- 1000M samples- USB power- USB 2.0 HiSpeed- 5V supply voltage- LED - power indicator- LED - logic indicator 0-1 on channel 1- USB connectionYou can change the sampling frequency by hand: 24MHz, 16MHz, 12MHz, 8MHz, 4MHz, 2MHz, 1MHz, 500kHz, 250kHz, 200KHz, 100KHz, 50KHz, 25KHz.Works with TTL levels: low level from -0.5V to 0.8V and high level from 2V to 5.25V. Code K0080 Available Price €8.49
Universal LCD Digital Multimeter UNI-T UT52 - Red Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0206 Backorder Price €34.90
RJ-45, RJ11, RJ12 network cable tester The tester is designed to test RJ45 network cabling: UTP, FTP, STP and telephone cables: RJ11 and RJ12. 8 LEDs for testing each individual conductor of an RJ twisted pair (cable is connected correctly when parallel LEDs 1-1 to 8-8 light up simultaneously). Code H0317 Price €5.49
Non-contact temperature measuring thermometer Uni-T UT300H The UNI-T UT300H temperature meter, which uses the latest technology, enables temperature measurements in the range of 32°C-42.9°C. The high accuracy of the device enables fast and accurate monitoring of body temperature as well as other environmental elements, e.g. objects, food, liquids, etc. Code H0313 Available Price €34.50