Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 1.2mm
  • Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 1.2mm

Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 1.2mm

Q0003

Tin ideal for application in consumer electronics circuits.
Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 1.2mm features:
- 100gr. 1.2mm diameter welding wire
- 60% tin and 40% lead
- Fusing temperature 183 „ƒ / 190 „ƒ
- Alloy Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit
- High quality - manufactured in EU

Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 1.2mm description


Tin ideal for application in consumer electronics circuits.

Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 1.2mm features:


- 100gr. 1.2mm diameter welding wire
- 60% tin and 40% lead
- Fusing temperature 183 „ƒ / 190 „ƒ
- Alloy Sn60 Pb40
- Flux 2.5%
- Quantity: 1 unit
- High quality - manufactured in EU

Data sheet

Diametro [mm]
1,2

Customers who bought this product also bought

A4 Thermal Transfer Film for DIY PCB circuits

Thermal transfer paper enables PCB manufacturing.
After designing the printed circuit in one of many programs, you must print the project on paper on a slippery page (in the reflected image) with a laser printer. The pattern (printed side) is transferred to the laminated plate from the copper side using the hot iron (the toner adheres to the copper under the influence of temperature).
It remains only to peel off the paper under water and start to engrave the laminate. It can be attacked with the Printed Circuit Recorder solution A4 Thermal Transfer Film for DIY PCB circuits features:

- material: A4 thermal transfer foil - quantity: 1 sheet

H0173

Price €0.37

Tower Pro Micro Servo 9g SG90 360 degree

Tower Pro Micro Servo 9g SG90 360 degree features:
- Operating voltage: 3.0-7.2V
- Speed (4.8V without load): 0.12sec / 60 degrees
- Strength: 1.2kg / 42.3oz (4.8V); 1.6 kg / 56.4oz (6.0V)
- Working temperature: -30 to +60 degrees C
- Cable length: approx. 23cm
- Includes photo accessories and screws
- Dimensions: 22x11.5x27mm

R0075

Price €2.44

Passive Buzzer 5V

The piezoelectric buzzer has a simple structure in which a ceramic piezoelectric disk is affixed to a vibrating plate. An alternative voltage applied to this element will cause a contraction or diametrical expansion of the element. This feature is used to fold a vibrating plate, which generates sounds. 2x Passive Buzzer 5V features:

- Input voltage: 3V to 12V
- Diameter: 12mm
- Height: 7.5mm
- Pin spacing: 6.5mm
- Impedance: 16 Ohm
- Working frequency: 2 to 5 KHz
- Quantity: 1 unit

M0011

Price €0.32

UNO Board CH340 micro USB clone

- It has an Atmega328P chip running at 16Mhz with factory-loaded bootloader
- The Uno R3 module has all the Arduino Uno R3 connectors and is compatible with all Arduino shields
Characteristic:
- Includes USB Cable
- ATmega328P 16MHz chip with external quartz crystal
- Microprocessor: ATMega328P
- Operating voltage: 5V
- Input voltage (recommended): 7-12V
- Input voltage (limits): 6-20V
- Clock speed: 16 MHz
- Digital I / O pins: 14 (6 with PWM)
- Analog input pins: 6
- DC current for Pin I / O: 20 mA
- Flash32 KB of which 0.5 KB are used by the bootloader - AtMega328P
- SRAM 2 KB - AtMega328P
- EEPROM 1 KB - AtMega328P
- Communication: micro USB female Type B

B0053

Price €7.93

Heat Shrinkable Tube 5 Colors 3 Meters Package

Heat Shrinkable Tube 5 Colors 3 Meters Package features:
- Heat shrink tubing is used to connect electrical cables, isolate resistor and capacitor points, mark and protect cables Electrical, protect metal bars or tubes against corrosion and protect antennas.
- These heat shrink tubes are very flexible and of high quality. Made in EU
- Different sizes of 20 cm each are delivered:
* 1,6mm: black, brown, red, yellow, orange
* 2,4mm: black, brown , red, yellow, blue
* 3,2mm: black, brown, red, yellow, blue
- Quantity: 15 units
- Material: polyolefin
- Shrinkage ratio: 2: 1 (maximum reduce to 1/2 of its supplied diameter)
- Minimum shrinkage temperature: 115 ° C maximum 200 ° C

K0047

Price €1.61

SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base

SMD No Clean RF800 Liquid Soldering Flux 50ml Colophony Alcohol Base features:
Flux liquid alcohol-based for electronic welding.
Type of flux: rosin without halides, non-corrosive, No Clean, Lead Free, Non-conductive
Form: liquid
Capacity: 50ml
Content of solid bodies: 0 ... 5%
Viscosity (at 25 ° C): 794Mg / cm3 The flux cleans and prepares the surfaces and components to be welded, it facilitates the adherence and fluidity of the tin thanks to the rest of the components.
It cleans easily with alcohol.
It can be used with any tin. Security: - Do not inhale the vapors of the bottle or those that come off when welding.
- Keep the boat tightly closed and far away from the children.
- Use in ventilated spaces.

Q0013

Price €3.13
€7.40

7,40 tax excl.

Out of stock
Do you want to receive an alert when product is back in stock?
 
We will send you an email once the product becomes available. Your email address will not be shared with anyone else.
Price €7.40

Order until 4pm we will send today
30 days return