Desoldering Wire 0.5mm
  • Desoldering Wire 0.5mm

Desoldering Wire 0.5mm

H0004

High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.
Desoldering Wire 0.5mm features:
- Material: Copper
- Length: 1.5m
- Width: 0.5mm

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Desoldering Wire 0.5mm description


High grade in the absorption of tin for professionals.
Copper mesh roll for desoldering electronic components.

Desoldering Wire 0.5mm features:


- Material: Copper
- Length: 1.5m
- Width: 0.5mm

Data sheet

Diametro [mm]
0,5

Customers who bought this product also bought

Matrix Membrane Keyboard 4x4 Modulo

High-quality membrane keyboard, with 16-key matrix, ultra-thin, less than 1mm thick, with adhesive system on the reverse side.
Ideal for your Arduino projects, but can also be used with other microcontrollers.
Matrix Membrane Keyboard 4x4 Modulo features:

- Rating circuit, Max: DC 35V 100 mA
- Cable length: 85 mm
- Dupont 8 pin connector
- Specific insulation: 100 M Ohm, 100V
- Useful life: + 1 million uses
- Contact parting:

M0025

Price €1.48

Rocker Switch KCD11 250V/3A On/Off SPST

Rocker Switch 3A 250V On/Off SPST features:
- AC 250V 3A 2 Pin ON/OFF I/O SPST Snap in mini oscillating switch
- Rocker switch; Type: On/Off (SPST)
- Control on and off SPST and 2 terminals
- Voltage and Current: AC250V, 3A
- Overall size: ~ 1.5 x 1 x 1.7 cm/0.6"x 0.4" x 0.7 "(L*W*H)
- Mounting hole size: 1.35 x 0.8 cm/0.53"x 0.315" (L*W)
- Black

K0092

Price €0.78

TP4056 Lithium Battery Charger Module 5V Micro USB

TP4056 5V Micro USB Lithium Battery Charger Module features:
- Based on TP4056ES regulator
- Lipo micro USB Li-Ion charger
- Input Voltage: 4.5V - 5.5 VDC
- Full charge voltage: 4.2V +/- 1.5%
- Max Output Current: 1A
- Indicator LED: charging red, charging green
- Operating temperature: -10ºC to + 85ºC
- IN + and IN- connection for electronic circuits
- Battery protection against over-discharge voltage: 2.5V - Protection against over current battery: 3A
- Measurements: 25x19x5 mm
- Ideal for 18650 batteries

A0100

Price €0.82

DS18B20 Probe 2m Submersible Temperature Sensor

Encapsulated with water resistant stainless steel with sensor dimensions 5.5*50mm, cable length 200 cm. DS18B20 Probe 2m Submersible Temperature Sensor features:
- Based on the DS18B20 chip
- Supply voltage: 3 ~ 5.5V
- Consumption <5mA
- Measuring Range: -55 °C to 125 °C
- Accuracy: +/- 0,5ºC
- Outputs: - GND black
      - Vcc red
      - Yellow digital output
- Inocidable steel
- Cable length: 2m  

S0015

Price €3.13

Cutting Pliers 130mm

Cutting Pliers 130mm features:
- This model is not isolated, please use it without current
- Use to cut soft materials, electronic components, cables, plastic card
- Can also be used for welding work

H0051

Price €3.55

Fan 12V 2x Cables 3D Reprap Printer

Fan 12V 2x Cables 3D Reprap Printer features:
- For Prusa RepRap 3D Printer
- Voltage: 12V
- Consumption: 90mA - Speed: 7000rpm ± 10%
- Noise level: 25dB ± 10%
- Screw diameter: 3.5mm
- Service Life Time: 35000 hours
- Operating temperature: -10 ° C to 65 ° C
- Cable length: 28cm
- Dimensions: 30mm x 30mm x 10mm

I0045

Price €1.31

Vertical Liquid Level Sensor Switch

Level sensor for liquids with float.
The liquid level sensor acts as a switch. The state is changed by means of a magnet located on the float. It can be used to detect liquid levels that are too high or too low.
Ideal for all those applications where it is necessary to control the level of non-corrosive liquids such as water tanks, aquariums.
Characteristic:
- Maximum Load: 50W
- Maximum Switching Voltage: 250V
- Maximum Switching Current: 0.5A
- Maximum charging current: 1A
- Operating temperature: -10ºC to + 60ºC
- Size: 58mm x 18mm

S0043

Price €2.44
€1.48

1,48 tax excl.

1
30+ items
Price €1.48

Order until 4pm we will send today
30 days return