LED Diode Assortment Kit 40x Red Green Yellow Blue LED Diode Assortment Kit 40x Red Green Yellow Blue features: - Lens color: Red, green, yellow, blue -difused- Size: 5 mm- Operating current: 20mA- Voltage (red) 1.8V-2.3V- Voltage (green) 3.2V-3.4V- Voltage (yellow) 1.8V-2.3V- Voltage (blue) 3.2V-3.4V- Anode (A): Positive (long leg): 28mm- Cathode (K): Negative (shorter leg): 25 mm- Operating temperature: -25ºC/80ºC- Welding temperature: + 260ºC- Quantity: 40 units - 10x red - 10x green - 10x yellow - 10x blue Code P0012 Available Price €0.05
SD Card Module Reader The SD card reader module is a simple solution for transferring data to and from a standard SD card.The pinout is directly compatible with Arduino, but it can also be used with other microcontrollers.SD Card Module Reader features:- Supply voltage: 3.3V or 5V - Interface: SPI 3.3V- Dimensions: 30mm x 50mm x 12mm Code M0023 Available Price €0.82
W1209 12V DC Thermostat Digital Temperature Controller Switch W1209 12V DC Thermostat Digital Temperature Controller Switch features: - Model: W1209 - Supply voltage: DC 12V - Temperature control mode: ON / OFF - Temperature range: -50 -110 ° C - Resolution: 0.1 ° C range -9.9 ~ 99.9 ° C, above is 1 ° C - Measurement accuracy: 0.1 ° C - Refresh rate: 0.5 s - Temperature protection 0-110 ° C - Static current: ‰ ¤ 35mA, working current ‰ ¤ 65mA - Power of output: 10A relay - Sensor probe: NTC waterproof sensor (10K 0.5%) - Environmental requirements: -10 ~ 60 ° C Humidity 20% -85% - Dimensions: 48 x 40 mm Code M0102 Available Price €3.13
NEC IR Remote Control Infrared emitter HX1838 Arduino Raspberry Remote Control HX1838 Infrared Emitter NEC IR Remote Control Infrared emitter HX1838 features: - 21 keys - Measurements 85x 40x 5mm - Includes battery Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards: Send / Receive information via IR - Wiring of the IR Remote control + Infrared IR Receiver VS1838 with UNO module - Lighting a red 3mm LED by Infrared Realization of a manageable Infrared robot - Wiring the IR Distance remote control + Infrared IR Receiver VS1838 with the UNO module - Fix the IR Distance remote control + VS1838 Infrared IR Receiver in a Mini 2WD DIY Car Robot Kit Code W0020 Available Price €0.81
LM35DZ Temperature Sensor TO-92 LM35 Temperature Sensor LM35DZ TO92 features:- The output is linear and each degree Celsius equals 10 mV- Power supply from 4 to 30 Vdc- Connection through analog input- Temperature range from 0ºC to 100ºC- Linearity +10 mV / ºC- Quantity: 1 unit Code S0016 Available Price €2.06
Potentiometer B50K linear Potentiometer B50K linear features: -50k OHM kΩ - linear potentiometer 50k Arduino -Tolerance: +/- 20% - Power: 0.125W Code K0069 Available Price €0.82
Micro Motor 3V 5V 6V DC with cable conector male For Arduino, Smart Car, Robotics.Small electric motor magnet for direct current (DC). Micro Motor 3V 5V 6V DC with cable conector male features: - Operating voltage: 1.5V to 6V - Cable 16cm with male connector - DC current: 350mA - Torque max.: 15g / cm- Max speed: 12000rpm- Weight: 16.5 g Code R0080 Available Regular price €1.61 -€0.26 Price €1.35
Servos Tester Servos Tester features: - 3-Channel Tester - For Electronica Arduino Code R0029 Available Regular price €2.31 -€1.00 Price €1.31
Universal LCD Digital Multimeter UNI-T UT52 - Red Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0205 Backorder Regular price €26.44 -€2.00 Price €24.44
Digital Multimeter Uni-T UT39A+ Modern compact digital multimeter with large LCD display provides and enhanced user experience. Voltage / current / resistance / capacitance analysis as well as diode, transistor and continuity testing. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0320 ✗ Out-of-Stock Price €19.75
Hantek Oscilloscope 6022BL USB 2 channel 20MHz Highly efficient and cost-effective oscilloscope with 2 channels. The high quality anodized aluminum case. The bandwidth is 20 MHz and the sampling rate is 48 MSa / s. Hantek Oscilloscope 6022BL USB 2 channel 20MHz features: 16-channel logic analyzer, 20MHz bandwidth. Operating system: Windows 7, Windows NT, Windows XP, Windows Vista. More than 20 kinds of automatic measurement functions. Intensity, inversion, addition, subtraction, multiplication, division, XY. Save the waves that appear on screen in JPG / BMP or excel formats. FFT spectrum analysis function. One computer can connect to many DSOs, the channel can be easily extended. Specifications: Inputs: 2 channels. Bandwidth: 20 MHz. Code K0049 ✗ Out-of-Stock Price €81.74
Hantek Oscilloscope UNI-T UTD2102CL+ 2 channel 100MHz UNI-T UTD2102CL+ Dual Channels Digital Storage Osciloscopio con 100MHz, 500MSa/s, 5000 wfms/s Code K0594 ✗ Out-of-Stock Regular price €243.80 -€16.00 Price €227.80
Digital Multimeter DT321B Voltmeter DT321B Digital Multimeter, Portable Multimeter, AC / DC Voltage Meter, Blue Backlight, Battery tester, Transistors tester, Acoustic Continuity Tester. Code H0195 Available Regular price €9.08 -€1.00 Price €8.08
Digital Mini Handheld Sound Level Meter Uni-T UT353 UT353 mini digital sound level meters can convert ambient sound into electric signals, process data and display results on LCD. They can constantly monitor ambient sound. The main features are white backlight, clear LCD screen, adjustable sampling rate, fast/slow, 1/2 inch condenser microphone. Light weight, ergonomic design, user-friendly interface. Code H0192 ✗ Out-of-Stock Regular price €17.60 -€0.30 Price €17.30
Hantek CC-65 BNC Clamp (65A) This Hantek CC-65 clamp is a special accessory for oscilloscope by means of BNC connector, which allows to measure the parameters and current waveforms. Its current transducer linearly transforms AC or DC current into AC or DC current voltage. By connecting the current clamp to an oscilloscope, the waveform of the current signal can be observed. Code H0240 Last items in stock Regular price €75.95 -€2.00 Price €73.95
non-contact basic voltage detector - Fazer 767 Test pen for non-contact voltage detection. It can detect AC current up to 500V and DC current up to 60V. This detector complies with IEC61010 standards: pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0315 Last items in stock Price €2.88
Desktop multimeter - laboratory meter UNI-T UT801 Digital benchtop multimeter for laboratories, to measure AC/DC current and voltage, resistance, capacitance, temperature, frequency, check continuity of circuits and diodes Code H0310 Last items in stock Regular price €90.00 -€15.00 Price €75.00
Hantek 365A - Virtual Multimeter for PC and iPad, Datalogger and Recorder Virtual multimeter for PC, it replaces a conventional multimeter and also performs functions of autonomous datalogger and recorder. Characteristic: - Continuous measurement and recording of values of voltages, currents, resistances, capacity, etc., in real time and with creation of graphs and curves, - Electrical insulation, - Compatible with Windows 2000, Windows 7, Windows XP, Win8 / 10 - Plug & play connection via USB, - Simple and intuitive software. Measurements and tolerances: Code K0174 Backorder Price €81.74
Universal LCD Digital Multimeter UNI-T UT52 - Red Modern digital multimeter with large LCD display that provides a better user experience. Voltage / current / resistance analysis, as well as diode, transistor and continuity tests. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0205 Backorder Regular price €26.44 -€2.00 Price €24.44
Digital Multimeter Uni-T UT39A+ Modern compact digital multimeter with large LCD display provides and enhanced user experience. Voltage / current / resistance / capacitance analysis as well as diode, transistor and continuity testing. This multimeter complies with IEC61010 standards: in pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0320 ✗ Out-of-Stock Price €19.75
Hantek Oscilloscope 6022BL USB 2 channel 20MHz Highly efficient and cost-effective oscilloscope with 2 channels. The high quality anodized aluminum case. The bandwidth is 20 MHz and the sampling rate is 48 MSa / s. Hantek Oscilloscope 6022BL USB 2 channel 20MHz features: 16-channel logic analyzer, 20MHz bandwidth. Operating system: Windows 7, Windows NT, Windows XP, Windows Vista. More than 20 kinds of automatic measurement functions. Intensity, inversion, addition, subtraction, multiplication, division, XY. Save the waves that appear on screen in JPG / BMP or excel formats. FFT spectrum analysis function. One computer can connect to many DSOs, the channel can be easily extended. Specifications: Inputs: 2 channels. Bandwidth: 20 MHz. Code K0049 ✗ Out-of-Stock Price €81.74
Hantek Oscilloscope UNI-T UTD2102CL+ 2 channel 100MHz UNI-T UTD2102CL+ Dual Channels Digital Storage Osciloscopio con 100MHz, 500MSa/s, 5000 wfms/s Code K0594 ✗ Out-of-Stock Regular price €243.80 -€16.00 Price €227.80
Digital Multimeter DT321B Voltmeter DT321B Digital Multimeter, Portable Multimeter, AC / DC Voltage Meter, Blue Backlight, Battery tester, Transistors tester, Acoustic Continuity Tester. Code H0195 Available Regular price €9.08 -€1.00 Price €8.08
Digital Mini Handheld Sound Level Meter Uni-T UT353 UT353 mini digital sound level meters can convert ambient sound into electric signals, process data and display results on LCD. They can constantly monitor ambient sound. The main features are white backlight, clear LCD screen, adjustable sampling rate, fast/slow, 1/2 inch condenser microphone. Light weight, ergonomic design, user-friendly interface. Code H0192 ✗ Out-of-Stock Regular price €17.60 -€0.30 Price €17.30
Hantek CC-65 BNC Clamp (65A) This Hantek CC-65 clamp is a special accessory for oscilloscope by means of BNC connector, which allows to measure the parameters and current waveforms. Its current transducer linearly transforms AC or DC current into AC or DC current voltage. By connecting the current clamp to an oscilloscope, the waveform of the current signal can be observed. Code H0240 Last items in stock Regular price €75.95 -€2.00 Price €73.95
non-contact basic voltage detector - Fazer 767 Test pen for non-contact voltage detection. It can detect AC current up to 500V and DC current up to 60V. This detector complies with IEC61010 standards: pollution degree 2, overvoltage category (CAT I 1000V, CAT II 600V) and double insulation. Code H0315 Last items in stock Price €2.88
Desktop multimeter - laboratory meter UNI-T UT801 Digital benchtop multimeter for laboratories, to measure AC/DC current and voltage, resistance, capacitance, temperature, frequency, check continuity of circuits and diodes Code H0310 Last items in stock Regular price €90.00 -€15.00 Price €75.00
Hantek 365A - Virtual Multimeter for PC and iPad, Datalogger and Recorder Virtual multimeter for PC, it replaces a conventional multimeter and also performs functions of autonomous datalogger and recorder. Characteristic: - Continuous measurement and recording of values of voltages, currents, resistances, capacity, etc., in real time and with creation of graphs and curves, - Electrical insulation, - Compatible with Windows 2000, Windows 7, Windows XP, Win8 / 10 - Plug & play connection via USB, - Simple and intuitive software. Measurements and tolerances: Code K0174 Backorder Price €81.74