Flux Solder Paste in Tin Can 40g Flux Solder Paste in Tin Can 40g features: - Welding paste according to DIN EN 29454-1 1.1.2.C- Flux paste based on medium activity rosin- Easy to solder: copper, silver plated, zinc and nickel Flux residues after welding do not cause corrosion of non-ferrous metals and may remain in the joints.Operating temperature of up to 350 C. Code Q0040 Available Price €2.29
Matrix Membrane Keyboard 4x4 Modulo High-quality membrane keyboard, with 16-key matrix, ultra-thin, less than 1mm thick, with adhesive system on the reverse side. Ideal for your Arduino projects, but can also be used with other microcontrollers. Matrix Membrane Keyboard 4x4 Modulo features: - Rating circuit, Max: DC 35V 100 mA - Cable length: 85 mm - Dupont 8 pin connector - Specific insulation: 100 M Ohm, 100V - Useful life: + 1 million uses - Contact parting: Code M0025 Available Price €1.79
10x Electrolytic Capacitor 470uF 16V 105ºC 10x Electrolytic Capacitor 470uF 16V 105ºC PIC Arduino features:-Type: Electrolytic Capacitor-Assembly: intern-Value: 470uF-Maximum tension: 16V-Maximum temperature 105º C-Dimensions: 8x12mm-Quantity: 10 units Code D0047 Available Price €0.13
MAX9812L Amplified Microphone for Measuring Sound The MAX9812 is a sound amplifier specially designed to treat the signal coming from microphones.We can use it together with Arduino to measure sound from a processor like Arduino.When we saw the modules with microphone we commented that, in general, the signal generated is too low to be registered correctly.If we want to be able to measure sounds, we will have to amplify the signal. The MAX9812L has single / dual inputs, fixed gain of 20dB, bandwidth of 400 kHz, low noise and low signal distortion 0.015% THD.There are two models, its supply voltage is 2.7V to 3.6V.We can use the sensors with MAX9812 for applications that require measuring the intensity or frequency of the sound. Code M0151 ✗ Out-of-Stock Price €6.90
5x 9v Battery Adapter Connector 6F22 with Cable Ideal to power your Arduino board through the power input. 5x 9v Battery Adapter Connector 6F22 with Cable features: - Cable 15cm long - Battery connector 9V, 6F22 Code PP013 Available Price €0.55
Mini Submersible Water Pump DC 3V 120L/H Characteristic: - Operating voltage: 3-6V - Max flow: 80-120 l / h - Maximum pumping height: 40-110cm - Continuous working time of 500 hours - Cable length: 20cm - Inside outlet diameter: 5 mm - Outside outlet diameter: 7.5 mm - Dimensions: 45mm x 23mm x 30mm Code M0040 Available Regular price €2.49 -€0.51 Price €1.98
Infrared LED Flame Sensor 5mm module Led module infrared sensor for ArduinoDetector of the source of fire or flame, can detect a flame or wavelength 760 nm-1100 nmParticularly sensitive to the flame spectrum.This optical flame sensor is a device that detects the existence of combustion by the light emitted by it. Infrared LED Flame Sensor 5mm module features:- 4 Pins Output: - A0: analog output - D0: digital output - GND: ground connection - VCC: 5V module power- Range of light, Distance of 80 cm.- Angle detection of about 60 degrees,- This light can be detected by an optical sensor,- Can be captured by digital inputs and analog inputs of Arduino. Code S0133 Available Price €1.39
Soldering Iron Cleaner with Brass Ball Holder Soldering Iron Cleaner with Brass Ball Holder features: - Brass wire cleaner for solder tips with support- It allows to remove the welding residues from the tips- Cleans better and does not cause temperature drops as with sponges- You do not need extra water to clean the tip- Easy and effective cleaning at the tip- Dimensions: diameter 50mm- Support dimensions: 60x68mm Code H0100 Last items in stock Price €4.79
Desoldering Wire 2mm High grade in the absorption of tin for professionals.Copper mesh roll for desoldering electronic components.Desoldering Wire 2mm features:- Material: Copper- Length: 1.5m- Width: 2mm Code H0006 Available Price €1.79
Welding Wire 1kg Tin 60/40 Sn/Pb Lead 2.5% Flux 0.5mm Tin ideal for application in consumer electronics circuits. Welding Wire 1kg Tin 60/40 Sn/Pb Lead 2.5% Flux 0.5mm. 60% tin and 40% lead. Melting temperature 183 o C / 190 o C. Flux 2.5%Manufactured in EU. Code Q0142 Backorder Price €65.90
Tin Coil Sn60Pb40 Flux Wire 0.3mm 3g The ideal tin for application in consumer electronics circuits, especially mobile phones and tablets. 3g of 0.3mm diameter tin wire. Consists of 60% tin, 40% lead. Code Q0121 Available Price €1.49
Desoldering Wire 1.5mm High grade in the absorption of tin for professionals.Copper mesh roll for desoldering electronic components.Desoldering Wire 1.5mm features:- Material: Copper- Length: 1.5m- Width: 1.5mm- Desoldering Braid Solder Remover Wick 1.5mm / 1.5m- Pure copper braid construction- Quick removal welding- Excellent thermal for a faster and safer desoldering Code H0005 ✗ Out-of-Stock Price €1.79
Tin Roll 99.3/0.7 Sn/Cu 3% Flux 10g 1mm Tin ideal for application in consumer electronics circuitsTin Roll 99.3/0.7 Sn/Cu 3% Flux 10g 1mm features:- 10 gr. welding wire of 1 mm diameter. 99,3% tin, 0,5-0,9% copper and 0,07% lead- Melting temperature 227 C- Alloy Sn99Cu1- Flux 3% Roma IPC-J-STD-004B, SW32 DIN8511 - RohS2 compliant - Quantity: 1 unit- High quality - manufactured in EU Code Q0102 Backorder Price €1.30
Tin Roll 60/40 Sn/Pb 2.5% Flux 10g 1mm Tin ideal for application in consumer electronics circuitsTin Roll 60/40 Sn/Pb 2.5% Flux 10g 1mm features:- 10 gr. welding wire of 1 mm diameter. 60% tin, 40% lead- Melting temperature 187/190 C- Alloy Sn60Pb40- Flux 2.5% SW26 1.1.2B ISO9454 - It is leaded alloy for manual and automatic processes where meeting the requirements of the RoHS2 Directive is not required. - Quantity: 1 unit- High quality - manufactured in EU Code Q0004 Available Price €1.49
Welding Wire Tin Sn60Pb40 Lead 1.2% Flux 0.6mm 50g Welding Wire 50g Tin 60/40 Sn/Pb Lead 1.2% Flux 0.6mm features: - 50gr. 0.3mm diameter welding wire. 60% tin and 40% lead - Fusing temperature 183 „ƒ / 190 „ƒ - Alloy Sn60 Pb40 - Flux 1.2% - Quantity: 1 unit Code Q0125 ✗ Out-of-Stock Price €3.49
Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 0.56mm 100g Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 0.56mm features: - 100gr. 0.56mm diameter welding wire. 60% tin and 40% lead- Fusing temperature 183 „ƒ / 190 „ƒ- Alloy Sn60 Pb40- Flux 2.5%- Quantity: 1 unit Code Q0103 Available Price €8.95
Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 1.5mm 100g Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 1.5mm features: - 100gr. 1.5mm diameter welding wire. 60% tin and 40% lead- Fusing temperature 183 „ƒ / 190 „ƒ- Alloy Sn60 Pb40- Flux 2.5%- Quantity: 1 unit Code Q0105 ✗ Out-of-Stock Price €8.95
Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 0.7mm 100g Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 0.7mm features: - 100gr. 0.7mm diameter welding wire. 60% tin and 40% lead- Fusing temperature 183 „ƒ / 190 „ƒ- Alloy Sn60 Pb40- Flux 2.5%- Quantity: 1 unit Code Q0104 ✗ Out-of-Stock Price €8.95
Tin in vial Sn60Pb40 Flux 2.2% Tin Wire 0.8mm 17g The ideal tin for application in consumer electronics circuits. 17g of 0.8mm diameter tin wire. Consists of 60% tin, 40% lead. In a handy pen dispenser format. Code Q0120 Available Price €1.75
Tin dispenser for solder reel Solder dispenser for convenient and faster soldering. Easily supplies you with solder in a fixed structure. Code H0187 Available Price €4.99
Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 1.5mm 100g Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 1.5mm features: - 100gr. 1.5mm diameter welding wire. 60% tin and 40% lead- Fusing temperature 183 „ƒ / 190 „ƒ- Alloy Sn60 Pb40- Flux 2.5%- Quantity: 1 unit Code Q0105 ✗ Out-of-Stock Price €8.95
Desoldering Wire 2mm High grade in the absorption of tin for professionals.Copper mesh roll for desoldering electronic components.Desoldering Wire 2mm features:- Material: Copper- Length: 1.5m- Width: 2mm Code H0006 Available Price €1.79
Desoldering Wire 1.5mm High grade in the absorption of tin for professionals.Copper mesh roll for desoldering electronic components.Desoldering Wire 1.5mm features:- Material: Copper- Length: 1.5m- Width: 1.5mm- Desoldering Braid Solder Remover Wick 1.5mm / 1.5m- Pure copper braid construction- Quick removal welding- Excellent thermal for a faster and safer desoldering Code H0005 ✗ Out-of-Stock Price €1.79
Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 0.5mm 250g Tin ideal for application in consumer electronics circuits. Welding Wire 250g Tin 60/40 Sn/Pb Lead 2.5% Flux 0.5mm. Code Q0111 ✗ Out-of-Stock Price €19.95
Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 1.2mm Tin ideal for application in consumer electronics circuits.Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 1.2mm features:- 100gr. 1.2mm diameter welding wire- 60% tin and 40% lead- Fusing temperature 183 „ƒ / 190 „ƒ- Alloy Sn60 Pb40- Flux 2.5%- Quantity: 1 unit- High quality - manufactured in EU Code Q0003 ✗ Out-of-Stock Price €8.95
Welding Wire Tin Sn60Pb40 Lead 1.2% Flux 0.6mm 50g Welding Wire 50g Tin 60/40 Sn/Pb Lead 1.2% Flux 0.6mm features: - 50gr. 0.3mm diameter welding wire. 60% tin and 40% lead - Fusing temperature 183 „ƒ / 190 „ƒ - Alloy Sn60 Pb40 - Flux 1.2% - Quantity: 1 unit Code Q0125 ✗ Out-of-Stock Price €3.49
Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 16g 1mm Tin ideal for application in consumer electronics circuitsTin Roll 60/40 Sn/Pb 2.5% Flux 10g 1mm features:- 16 gr. welding wire of 1 mm diameter. 60% tin, 40% lead- Melting temperature 187/190 C- Alloy Sn60Pb40- Flux 2.5% SW26 1.1.2B ISO9454 - It is leaded alloy for manual and automatic processes where meeting the requirements of the RoHS2 Directive is not required. - Quantity: 1 unit- High quality - manufactured in EU Code Q0114 ✗ Out-of-Stock Price €1.79
Solder Wire Tin Sn60Pb40 Lead 2.5% Flux 0.56mm 100g Welding Wire 100g Tin 60/40 Sn/Pb Lead 2.5% Flux 0.56mm features: - 100gr. 0.56mm diameter welding wire. 60% tin and 40% lead- Fusing temperature 183 „ƒ / 190 „ƒ- Alloy Sn60 Pb40- Flux 2.5%- Quantity: 1 unit Code Q0103 Available Price €8.95