2.4 inch TFT LCD screen 240x320 SPI LCD TFT Display Module 240x320 2.4 SPI features: - LCD screen TFT 240x320 pixels- 262,000 possible colors (18 bit)- Pixel: RGB vertical band- Driver ILI9341- SPI interface- 8-bit digital interface, 4-bit control lines- Resistive touch screen 4 - cables- Ideal for projects with ARDUINO, Uno R3, MEGA2560 Helpful Links: Wiring of the TFT LCD screen 2.4 SPI - Connect the TFT 2.4 SPI LCD screen with the UNO module Display graphics and texts on the LCD TFT screen 2.4 SPI Program a touch calculator on the LCD screen TFT 2.4 SPI Code P0001 Available Regular price €11.95 -€2.40 Price €9.55
DS18B20 Waterproof Digital Temperature Sensor Probe 3m Encapsulated with water resistant stainless steel with sensor dimensions 6 * 50mm, cable length 300 cm. DS18B20 Waterproof Digital Temperature Sensor Probe 3m features:- Based on the DS18B20 chip- Supply voltage: 3 ~ 5.5V- Consumption <5mA- Measuring Range: -55 ° C to 125 ° C- Accuracy: +/- 0,5ºC- Outputs: - GND black - Vcc red - Yellow digital output- Inocidable steel- Cable length: 3m Code S0008 ✗ Out-of-Stock Price €4.85
Cables for Multimeter 2 Cables for 1M Multimeter Meter features: - Voltage 1000V, 10A CAT III- Total length 110cm- Red and black colors Code K0012 Available Price €3.95
Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino compatible Antenna 2.4 GHz WIFI 3 dBi Adapter IPEX SMA IPX U.fl ESP8266 Arduino features: - Can be connected with the ESP8266 module with ipex- Standard: 2.4GHz- Frequency range: 2400 ~ 2500MHz- Interface: SMA- Gain: 3dBi- Length of the antenna: 10cm- V.S.W.R.: <1.5- Polarization: Vertical- No Circularity (dB): +/- 0.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40'C ~ + 70'C Code W0070 Available Price €4.50
10x Female-Female Cables 20cm Jumpers Dupont 2,54 10x Female-Female Cables 20cm Jumpers Dupont 2,54 features: -Length: 20cm-Quantity: 10 cables-Connectors have female header contacts at either end -Compatible with male connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0005 Available Price €1.69
LCD Display Screen Blue Backlight 20x4 2004 It works exactly the same and with the same libraries as an LCD1602.It consists of a display of 20 characters and 4 rows.Ideal for projects with Arduino.You can use it with PIC, AVR, STM32. LCD Display Screen Blue Backlight 20x4 2004 features:- LCD screen, 20 characters and 4 lines- 5V power- Backlit blue background, white letters Code P0002 Available Price €8.95
Relay Module 1 Channel 5V 10A 1 Channel 5V Relay Module. This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL). Relay Module 1 Channel 5V 10A features: - Channel: 1 - Supply Voltage: 5V - Output Current: 10A - Relay activation current: 15mA ~ 20mA - LED indicator - Dimensions: 30x 54mm Code RL005 Available Price €1.29
Samsung USB Wall Charger USB-C 15W PD AFC black Fast AC charger (EP-T1510NBEGEU). Features a USB Type-C port that allows charging up to 15W. Allows fast charging of devices, including Power Delivery and AFC standards. It is made of fireproof PC material. It has been equipped with many protections, such as overheating, overvoltage, high voltage or overcharging. Code KH016 Available Price €15.99
10x Male-Male Cables 20cm Jumpers Dupont 2,54 10x Male-Male Cables 20cm Jumpers Dupont 2,54 features: -Length: 20cm-Quantity: 10 cables-Connectors have male header contacts at either end-Compatible with female connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0007 Available Price €1.69
10x Female-Male Cables 20cm Jumpers Dupont 10x Female-Male Cables 20cm Jumpers Dupont features: -Length: 20cm-Quantity: 10 cables-Connectors have male and female header contacts at either end-Compatible with male and female connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0009 Available Price €1.69
LED diode 1W White SMD 130LM Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 120-130LM - Beam angle: 130 degrees Code P0043 ✗ Out-of-Stock Price €0.98
LED 1W Red SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip - Voltage: 2.2-2.4V - Current: 300mA - Luminous flux: 40-50LM - Ã beam angle: 120 degrees - Color emission: red Code P0044 Available Price €0.98
USB to Micro USB On/Off Switch for Arduino Charger Cable It has an ON / OFF switch that will cut off power when you don't need it. USB to Micro USB On/Off Switch Arduino Charger Cable features: - Black color - Length: 150cm - Maximum current 1A Code K0054 Available Price €2.85
LED 1W Orange SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip - Voltage: 2.2-2.4V - Current: 300mA - Luminous flux: 40-50LM - Ã Beam angle: 120 degrees - Color emission: yellow / orange Code P0045 Available Price €0.98
LED 1W Green SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 30mil chip - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 70-80LM - Ã beam angle: 120 degrees - Color emission: green Code P0046 Available Price €0.98
LED 1W Blue SMD Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers. The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Important to keep in mind the diodes generate a lot of light intensity and very concentrated. Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil - Voltage: 3.0-3.2V - Current: 300mA - Luminous flux: 20-30LM - Ã beam angle: 120 degrees - Color emission: blue Code P0047 Available Price €0.98
SONOFF SNZB-02 - ZigBee Temperature And Humidity Sensor SONOFF SNZB-02 is an elegant mini wireless intelligent temperature and humidity sensor via ZigBee, through its Bridge(required). Program and create scenes based on the detected values. Maintain a stable temperature in your home. Code WS039 ✗ Out-of-Stock Price €9.90
Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm Can be connected with the ESP8266 module with IPEXCompatible with Hirose U.FL and IPEX MHF1 Adapter SMA Female GPS GSM IPEX 2.4 Ghz RF ESP8266 1.13mm 50 Ohm features: - Frequency range: 0 ~ 6000MHz- Interface: SMA female connector- IPEX female connector- Cable length: 15cm- Coaxial cable: 1,13mm- V.S.W.R.: <1.5- Impedance (ohm): 50- Maximum input power (W): 50W- Operating temperature: -40ºC ~ + 70ºC Code W0071 Available Price €2.19
Relay Module DC 5V 10A 2 Channel Low/High Trigger Relay Module DC 5V 10A 2 Channel Low/High Trigger features:- Channels: 2 (independent protected with Optocouplers)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator: For each channel- Dimensions: 40x 50mm- It has a jumper that allows to choose type of trigger signal (low / high)- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Code RL002 Available Price €3.15
5x Pushbutton B3F Green Key Omron Electronica for Arduino Prototype Switch 12 5x Pushbutton B3F Green Key Omron Electronica Arduino Prototype Switch 12 features:- 5x Pushbuttons B3F Omron- 5x Keys- Maximum current: 50mA- Tension DC: 24V- Operating force: 1.27N- Switch terminals - Weldable- Contact: SPST-NO- Contact resistance: 100M Ohm- Type of action: Superficial- Measures: 12x12x7.3mm Code K0075 Available Price €0.20
Nokia Graphic LCD 84x48 5110 3310 SPI White The display is compatible with the PCD8544 controller. Ideal for projects with ARDUINO. You can use it with PIC, AVR, STM32 . Characteristic: - LCD screen, 48x84 pixels - Vcc supply 2.7-3.3V - Voltage LED backlight 2.7-3.2V - Compatible PCD8544 controller - SPI interface - PCB dimensions (mm): 45x45 - Includes solder pins - The screen may have small stripes Code P0003 Available Price €2.95
M18 Inductive Proximity Sensor M18 Inductive Proximity Sensor features: - Inductive proximity sensor detection switch LJ18A3-8-Z / BX - NPN DC6-36V - A Often used for 3D printer bed leveling - Cylindrical cable type DC 3 cable type (black, brown, blue) - Inductive sensor type - NPN NO (Normal Open ) - Detecting distance 8mm - DC supply voltage 6-36V - Current output 300mA - Response frequency 0.5KHz - Detects iron / aluminum - Operating temperature -25 ° C to + 70 ° C (Non-freezing condition) - Head diameter 18 mm - Size 6.9 x 2cm - Cable length 90cm Code S0042 Available Price €3.49
2N2222 NPN 40V 800mA transistor pack 10pcs Product Category: Bipolar Transistor, NPN. 2N2222 NPN 40V 800mA 300MHz transistor features: - Package / Case: TO-92 - Quantity: 20 units - Collector-base voltage VCBO: 75V - Collector-emitter voltage VCEO: 40V - VEBO emitter-base voltage: 6V - Continuous collector current: 600mA - DC MAX collector current: 800mA - Maximum power dissipation: 1.6W Code T0006 Available Price €0.09
XM-15B Bluetooth Serial Port Module Master Slave Arduino compatible HC-05/06 XM-15B Bluetooth Serial Port Module Master Slave Compatible Arduino HC-05/06 features: * Power 3.0V -6V* 3.3V / 5V logic levels* Bluetooth version V2.1 + EDR* Frequency: 2.4GHz ISM band* Reach approx. 30m* Security: Authentication and encryption* Supports AT commands for configuration through a serial port* Working temperature: -20 ºC to +75 ºC* Working current - 50 mA* PCB dimension: 35 x 19m -Using the conventional Bluetooth CSR chip, the protocol standard Bluetooth V2.1 + EDR, passes the Bluetooth BQB certification-Fast start, only 0.3 seconds to complete the initialization of the complete module (including the Bluetooth protocol stack)- Built-in hardware protector, never hangs Code W0022 Available Price €7.49
MQ-3 Alcohol Sensor Module Ethanol Breathalyzer Ethanol alcohol sensor module.MQ gas sensor uses a small indoor heater with an electrochemical sensor.When the alcohol molecules in the air comply with the electrode the ethanol "changes" into acetic acid and then more current is produced.MQ-3 Alcohol Sensor Module Ethanol Breathalyzer features:- Main chip: alcohol sensor MQ-3 and comparator LM393- Working voltage: 5V- Current: 150mA- Digital output: TTL 0/1- Analog output: analog voltage sensing value- Detection concentration:- 0.05mg/L - 10mg/L- Quick response features:- Adjustable sensitivity with the potentiometer- Size: 32mm x 20mmx 18mm Code S0009 Available Price €2.95
DHT22/AM2302 Temperature Humidity Sensor The DHT22 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement. This sensor, unlike DHT11, is capable of measuring negative temperature values and measures tenths of a degree. DHT22/AM2302 Temperature Humidity Sensor features: - Voltage Operating: 3 to 5.5 VDC - Humidity measurement range: 0-100% ± 2% accuracy - Temperature measurement range: -40ºC to 80ºC ± 0.5º accuracy - Maximum sampling rate: 2 seconds Code S0018 Available Price €3.95
SparkFun micro:climate kit for micro:bit - v3.0 The SparkFun micro:Climate kit is a complete weather station kit that builds on the weather:bit carrier board with weather and soil moisture sensors, all powered by the micro:bit. board. Code SP073 Backorder Price €179.00
Push button 6x6x4mm Push button 6x6x4mm features: -Touch Push Tact Switch mini electronic Arduino push button -Measures: 6x6x4.3mm Code K0079 Available Price €0.21
LCD Display Screen Blue 1602 + Adapter Board Module IIC/I2C - It consists of a display of 16 characters and 2 rows- The display is compatible with the HD44780 controller- Ideal for projects with ARDUINO- You can use it with PIC, AVR, STM32 PCF8574 -> the default address 0x20PCF8574A -> the default address 0x3F- It can be changed to any between 0x20 and 0x27 depending on whether you have soldiers or not pins A0 A1 A2 Screen LCD Display Screen Blue 1602 + Adapter Board Module IIC/I2C features: - LCD screen, 16 characters and 2 lines- 5V power- HD44780 compatible controller- Backlit blue background, white letters- Include an adjustable contrast pin- Dimensions (mm): 80 x 36 x 12 Adapter LCD Display Screen Blue 1602 + Adapter Board Module IIC/I2C features: Code KT002 Available Regular price €4.04 --€0.80 Price €4.84
20x4 2004 LCD display PCF8574T I2C Backlit Blue - It consists of a 20-character, 4-row display - The display is compatible with the controller HD44780 and integrates the module so you can use it through the I2C protocol without any problem - Only two pins are needed for communication, SDA and SCL - Ideal for projects with ARDUINO and Raspberry Pi platforms - You can use it with PIC, AVR, STM32 PCF8574 - & gt; the default address 0x20 PCF8574A - & gt; the default address 0x3F - It can be changed to any between 0x20 and 0x27 depending on whether or not you have soldered pins A0 A1 A2 20x4 2004 LCD display PCF8574T I2C Backlit Blue features: - LCD screen, 20 characters and 4 lines - 5V power supply - HD44780 compatible controller Code P0013 Available Regular price €8.49 -€1.50 Price €6.99
LCD Display Screen Green 20x4 2004 - It consists of a screen of 20 characters and 4 rows- Ideal for projects with ARDUINO- You can use it with PIC, AVR, STM32 LCD Display Screen Green 20x4 2004 features: - LCD screen, 20 characters and 4 lines- 5V power- Retro green background illuminated, black letters Code P0017 Available Price €8.49
TFT LCD Expansion Board Adapter 34pins V3.0 3.2" 4.3" 5.0" Shield Mega 2560 TFT LCD 34pins Expansion Board Adapter 3.2" 4.3" 5.0 Shield Mega 2560 features:- Facilitates connections between the LCD TFT Touch 3V 2.4 ", 2.8", 3.2 "etc. with SD card reader and the Arduino Mega 2560 board- Put the screen on the Shield and you can connect it directly to the Arduino Mega2560.- TFT LCD MFT TFT LCD PCB adapter for Arduino Mega2560 STM32- The TFT01 LCD operates at 3.3V and can not be used directly on the standard Arduino motherboard at the top.- The TFT LCD PCB adapter for Mega is compatible with the Arduino pins, the user can directly connect the TFT LCD PCB - Adapter on the shield and stand on the Arduino board. It can be used with a Mega2560 and LCD screen. Code P0006 Available Price €7.90
TDA2822M Dual DIP8 Stereo Audio Low Voltage Power Amplifier TDA2822M Dual DIP8 Stereo Audio Low Voltage Power Amplifier features:- Package / Case: 8-DIP- Voltage - Supply (Vs): 1.8V ~ 15V- Quantity: 1 unit Code T0018 Available Price €1.49
WS2812B RGB LED Strip White 1m 30 LED/M IP65 WS2812B RGB LED Strip White 1m 30 LED/M IP65 features: - IP65 RGB Addressable Smart Arduino - RGB LED WS2812B S2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually S2812B includes a built-in inside each LED, which allows each pixel to be accessed individually - For this reason, these types of LEDs are called individually indexable - They are based on the 5050 LED - 30 individually indexable LED diodes - 24-bit color control (8-bit PWM per channel) - 16.8 million colors by LED - One-wire communication - Power: 5 V idth: 11 mm - Thickness: 2.6 mm - Length: 1 meter - Consumption: 1.8A (all white) ater resistant Code P0103 Available Price €9.75
IRLZ44N N-Channel Mosfet Transistor TO-220 55V 47A 2x IRLZ44N N-Channel Mosfet Transistor TO-220 55V 47A features:- Package / Case: TO-220- Quantity: 2 units Code T0011 Available Price €1.99
Fan 12V 2 wire Reprap 3D printer Characteristic: - Voltage: 12V - Consumption: 120mA - Speed: 4800rpm -5600rpm - Noise level: 25dB ± 10% - Screw diameter: 4.5mm - Life time: 40000 hours - Operating temperature: -10 ° C to 65 ° C - Length Cable: 28cm - Dimensions: 40mm x 40mm x 20mm - For cooling MK8 hotels Code I0025 Available Regular price €2.54 -€0.55 Price €1.99
Fan 12V 2x 3D Printer Cables Fan 12V 2x 3D Printer Cables features: - Voltage: 12V - Consumption: 65mA - Speed: 3800rpm -5600rpm - Noise level: 25dB ± 10% - Screw diameter: 4.5mm - Service Life Time: 35000 hours - Operating temperature: -10 ° C to 65 ° C - Cable length: 11cm - Dimensions: 40mm x 40mm x 10mm Code I0026 Available Price €1.59
4N35 DIP Optocoupler 30V 60mA - 2pcs 4N35 DIP Optocoupler 30V 60mA - features: -NPN Phototransistor Optocoupler Code T0019 Available Price €0.49
Mini Fan 12V 2x 3D Printer Cables Mini Fan 12V 2x 3D Printer Cables features: - Voltage: 12V - Consumption: 80mA - Speed: 2600rpm +/- 10% - Temperature operating: -10 ° C to 65 ° C - Cable length: 12cm - Dimensions: 25mmx 25mm x 10mm Code I0027 Available Price €1.59
USB to DC Charger Cable 2.1/5.5mm USB to DC Charger Cable 2.1/5.5mm features: - Charger Cable for Arduino Android- Color: Black- Length: 120cm Code K0055 Available Price €1.49
2x MOC3020 Optocoupler 400V 2x MOC3020 Optocoupler 400V features:-Triac Driver Output Optoisolator-Pack: DIL 6-Electronic voltage forward: 1.15V-Trigger LED current: 30mA-Voltage isolation: 5,300 VAC RMS-Maximum blocking voltage: 400V-Temperature of operation: -40°C a + 85°C Code T0013 Available Price €0.79
ESP8266 WiFi Motor Drive L293D Expansion Shield Board ESP12E NodeMcu Allows control: - Up to 2 bidirectional current motors- Or 1 stepper motor Shield is compatible with NodeMcu ESP8266 CP2102 WIFI Development Board ESP8266 WiFi Motor Drive L293D Expansion Shield Board ESP12E NodeMcu features: - Minimum operating voltage: 4.5 V- Maximum operating voltage: 36 V- Maximum current: ± 1.2 A- Logic voltage: - 2.3V <= HIV <= VIN (high) - 0.3V <= VIL <= 1.5V (low)- Controller L293D- Measures: 58x42 mm ESP12 port control kit: - D1, D3 - motorA- D2, D4 - motorB Code W0015 Available Price €3.49
Qwiic cable kit The SparkFun Qwiic Cable Kit includes 10 cables of different lengths and styles that will connect your Qwiic boards to each other, to a development platform or to a breadboard. Each Qwiic cable is colour coded red, black, blue and yellow with 1mm JST termination. Code SP098 Available Price €11.95
Keyboard Shield 16x2 LCD screen for Arduino It is made up of a 16-character, 2-row, 6-button display. The display is compatible with the HD44780 controller and is connected in 4-bit mode so it can be used directly through the Arduino LiquidCrystal library. Ideal to navigate through the different parts of the configuration or map. Keyboard Shield 16x2 LCD screen for Arduino features: > - 2x16 LCD with blue backlight and white characters - Potentiometer to modify the LCD contrast - 5-push-button keyboard + RESET - Use of the minimum possible channels - Full compatibility with Arduino UNO and Mega - The display is compatible with the HD44780 controller - Response time: 30 ms - Size: 80 x 60 x 22 mm Code P0020 Available Price €4.49
Digital Compass Magnetometer GY-271 5883 Compass is based on a QMC5883L system, which allows you to specify the direction of the earth's magnetic field. Digital Compass Magnetometer GY-271 features: 3.3V - 6V power supply voltage Current consumption of 100μA (standby 2uA) I2C interface Transmission speed 400kHz Sensitivity 230-1370 LSB / Gs Resolution 0.73-4.35mGs Frequency of 75Hz Measurement of the magnetic field in three axes of ± 8 Gauss with a resolution of 5 gauss miles Interruption DRDY pin Dimensions of 14 mm x 14 mm Code M0061 Available Price €3.32
CP2102 USB 2.0 A RS232 Converter UART TTL Serial Ideal for connecting TTL RS232 devices to your PC through the USB port. CP2102 USB 2.0 A RS232 Converter UART TTL Serial features: - Controller CP2102- 5 pins: 3.3v, 5.0v, TxR, RxD, GND- Standard USB type to male and 5 pin TTL connector- 3 Status LEDs: Power, RX and TX- USB 2.0 specification with 12Mbps maximum speed Code C0001 Available Price €3.70
ESP8266 5V WiFi Relay Module AP Remote Control + STA You can easily control any device over the Internet through your phone, computer, etc. The module can handle 5 users at the same time, it can work in two modes: STA (client) and AP (access point). In AP mode, the module is connected via WIFI directly to your phone or computer (in open field can be up to 300 meters). In STA mode, the relay module is connected to the access point (router) that supplies the network. Wi-Fi in the room where the relays are located. In this case, the range mainly depends on the power of the access point antennas (routers). You should not turn off after the configuration is completed, as some of the parameters of the WIFI module cannot be saved when power is cut off. Code W0067 Available Price €9.49
LED Diode COB 3W White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)- the light intensity is greater without the need to concentrate the beam of light- greater durability- opening angle of up to 160ºC- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0027 ✗ Out-of-Stock Price €1.32
LED Power Diode COB 5W White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer.Place a little thermal silicone in each of the diode placement centers. Code P0028 Available Price €2.11
White Diode 9W LED COB SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone-coated tabletThe advantages of LED COB:- A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Opening angle of up to 160º Code P0029 Available Price €2.93
LED Power Diode COB 12W White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes. Code P0030 ✗ Out-of-Stock Price €3.38
LED Power Diode COB 15W White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0031 Last items in stock Price €3.71
LED Diode COB 20W 6000K White SMD COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without concentrating the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit. Code P0032 Available Price €4.49
Mini RS232 to TTL Adapter Max3232 Converter Mini RS232 to TTL Adapter Max3232 Converter features: - Converter for RS232 to TTL levels - MAX3232CSE chip - Voltage: 3V a 5V - Speed: no more than 120kbps - Dimensions: 16x9mm Code C0008 Available Price €1.49
USB 2.0 A Serial Port Cable Adapter DB9 RS232 Series An RS232 serial port to your PC through the USB port USB 2.0 A Serial Port Cable Adapter DB9 RS232 Series features: - CH341 driver- Supported OS: WinME, Win2003, Win XP, Vista, Win 7, Linux, MAC OS9.0/OSX- High quality, shielded cable- Power and data in the same cable, does not require more adapters- Compatible USB interface 1.1 and 2.0- Support up to 1 mega data transfer- Length 73cm The adapter allows you to connect a computer with: - Electric meters- Decoders, programmers- Cash registers- Satellite TV- Control panels- Mobile phones- Diagnostic interfaces for cars- The administration of Cisco routers Code C0010 Available Price €3.29
Multimeter Cable Polymeter Jack Alligator Clip Banana Plug Multimeter Cable Polymeter Jack Alligator Clip Banana Plug features: - Length: 90cm - Colors: red and black - 4mm diameter plug - Quantity: 2 Cables Code K0053 Available Price €2.99
High Power LED Chip Diode 10W Blue SMD COB COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)- The light intensity is greater without needing to concentrate so much the beam of light- Greater durability- Angle of opening up to 160ºC- Multidirectional light - Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little thermal silicone in each of the placement centers of the diodes- The thermal paste increases the thermal transfer between the diode and the metal plate used as circuit Code P0033 Available Price €2.83
Potentiometer B20K linear Potentiometer B20K linear features: -20k OHM kΩ - linear potentiometer 20k Arduino -Tolerance: +/- 20% - Power: 0.125W Code K0068 Available Price €0.98
Potentiometer B50K linear Potentiometer B50K linear features: -50k OHM kΩ - linear potentiometer 50k Arduino -Tolerance: +/- 20% - Power: 0.125W Code K0069 Available Price €0.99
Potentiometer B100K linear Characteristic: -100k OHM kΩ - Linear potentiometer 100k Arduino -Tolerance: +/- 20% - Power: 0.125W Code K0070 Available Price €0.99