Banana Plug Connector 4mm Male Black Banana Plug Connector 4mm Male Black features: - Arduino PCB Robot PCB Test Code K0025 Available Price €0.39
SparkFun WiFi Shield - ESP8266 The SparkFun WiFi ESP8266 Shield is a shield for Arduino R3 R3 board enabling internet connection. ESP8266 as you all know is a solid fundament for any IoT project an in this version it can be simply and easily put on your board. It is a great middle ground between the sole module and the development board such NodeMcu or WeMos. So if you need a relatively cheap and super reliable way to internet for your Arduino project - this is the shield for you! ESP8266 shield WiFi comes with an AT-command firmware, hence can be controlled by any UART. It works great with any Arduino R· layout. The shield doesn´t have the headers on. Code SP006 Last items in stock Price €21.99
Thermal Conductive Pad TO220 18x13x0.3mm 1.5W/mK Thermal Conductive Pad TO220 18x13x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 18x13x0,3mm Code Q0077 Available Price €0.50
LED indicator light 18mm 230V Red plastic with cable 20cm Red LED indicator light with 20cm cable for machinery lights Code K0280 Last items in stock Price €0.85
SW-520D Vibration Metal Tilt Sensor Detects changes in the sensor angle and returns to the digital value. 5x SW-520D Vibration Metal Tilt Sensor features: - Contact resistance: Code S0020 Available Price €0.45
Thermal Conductive Pad TO247 23x18x0.3mm 1.5W/mK Thermal Conductive Pad TO247 23x18x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass.- Dimensions: 23x18x0,3mm Code Q0076 Available Price €0.50
2x Electronic Clips Crocodile 2x50mm Black + Red pack 2pcs 2x Electronic Clips Crocodile 2x50mm Black + Red features: - Length: 50mm- Quantity: 2 units Code K0026 Available Price €0.99
TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK TO Thermal Conductive Pad 26x26x0.3mm 1.5W/mK features: - The thermal conductive pads with a thermal conductivity of 1.5 W / mK, are a good thermal conductor and at the same time a good electrical insulator- A double-sided adhesive product, reinforced with fiberglass- Dimensions: 26x26x0,3mm Code Q0074 Available Price €0.50
Potentiometer B1K Linear Potentiometer B1K Linear features: -1k OHM kΩ - linear potentiometer 1k Arduino -Tolerance: +/- 20% - Power: 0.125W Code K0065 Available Price €0.99
Microcontroller ATMEGA328P-PU DIP-28 Microcontroller ATMEGA328P-PU DIP-28 features:- Series: AVR® ATmega- Core Processor: AVR- Package / Case: 28-DIP (0.300 ", 7.62mm)- Core Size: 8-Bit- Speed: 20MHz- Connectivity: I²C, SPI, UART / USART- Peripherals Brown-out: Detect / Reset, POR, PWM, WDT- Number of I/O: 23- Program Memory Size: 32KB (16K x 16)- Program Memory Type: FLASH- EEPROM Size: 1K x 8- RAM Size: 2K x 8- Voltage - Supply (Vcc / Vdd): 1.8 V ~ 5.5 V- Data Converters: A / D 6x10b- Oscillator Type: Internal- Operating Temperature: -40 ° C ~ 85 ° CFManufacturer: SGS-THOMSON / ST- RoHS: Yes- Quantity: 1 unit Code T0008 Available Price €5.95
W5100 Mini Network Module Ethernet Shield Arduino compatible W5100 Mini Network Module Ethernet Shield Arduino features: - Shield Ethernet for Arduino and compatible boards based on the Wiznet W5100 chip - Provides a simple mode to connect your module to the local network and the internet - Compatible with the official Arduino Ethernet library - With this shield you can build a web server - It can be used as a server or as a client - Controller: Wiznet W5100 - Supports TCP and UDP protocols - Supports up to 4 simultaneous connections - Compatible with all versions of Arduino: UNO, mega 1280/2560 - Dimensions: 50 x 25x 25mm Code W0074 Available Price €10.90
Gravity: Analog pH Sensor/Meter Kit V2 DFRobot Gravity: The V2 analogue pH meter is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. The DFRobot ph sensor is commonly used in various applications such as aquaponics, aquaculture and environmental water testing. The pH is a value that measures acidity or alkalinity. Code DF003 Last items in stock Price €57.80
LED Diode Assortment Kit 50x Red Green Yellow Blue White LED Diode Assortment Kit 50x Red Green Yellow Blue White features: - Lens color: Red, green, yellow, blue - diffuse, light white- Size: 5 mm- Operating current: 20mA- Voltage (red) 1.8V-2.3V- Voltage (green) 3.2V-3.4V- Voltage (yellow) 1.8V-2.3V- Voltage (blue) 3.0V-3.2V- Voltage (white) 3.2V - 3.4V- Anode (A): Positive (long leg): 17mm- Cathode (K): Negative (shorter leg): 15 mm- Operating temperature: -25ºC / 80ºC- Welding temperature: + 260ºC- Quantity: - 50 units - 10x red - 10x green - 10x yellow - 10x blue - 10x white Code P0007 Available Price €1.99
GamePad for micro:bit (V4.0) GamePad for micro:bit V4.0 adopts a high-precision three-axis analog quantity joystick. The combination of joystick and gamepad allows you to control the direction and speed of Maqueen at the same time. In addition, there are 7 programmable buttons, which means you can explore more interesting functions and more flexible controls. In the latest V4.0 product, we have placed the external battery box on the PCB, which is more convenient to use. Code DF009 Available Price €24.95
SONOFF RM433 Remote Controller The Sonoff IFan03 is an intelligent controller for ceiling fans with light that allows us to control it intelligently, either by the eWeLink application, by means of 433MHz RF control or by voice assistants such as Alexa or Google Home. Create your own scenes, turn on the light and/or the fan and adjust its speed, programming it to the hours you want. Code WS037 Available Price €6.99
3x Heat Sink Aluminium Adhesive A4988 DRV8825 3x Heat Sink Aluminium Adhesive A4988 DRV8825 features: - Package includes: 3x Heatsink with adhesive - Ideal for DRV8825, A4988 etc - Dimensions: 9 x 9 x 5mm Code I0046 Available Price €0.35
Potentiometer B10K linear Characteristic: -10k OHM kΩ - linear potentiometer 10k Arduino -Tolerance: +/- 20% - Power: 0.125W Code K0067 Available Price €0.99
433MHz RF Wireless Receiver + Transmitter Transmitter and receiver kit for radio control and data transmission, compatible with Arduino. 433MHz RF Wireless Receiver + Transmitter features: Specifications of the emitter module: - Power supply: 3V ~ 12V - Working intensity: max = 40mA (at 12V), min = 9mA (at 3V) - AM ASK / OOK modulation - SAW filter - Working frequency: 315MHz-433.92MHz - Transmission power: 25mW (315MHz at 12V) - Range: 20 to 200 meters (different voltages can give different results) - Transfer speed: 4 kB / S - Dimensions: 19x 19x 7mm Receiver module specifications: - Power supply: 5.0VDC + 0.5V - Work intensity: 5.5mA (at 5.0VDC) - Work frequency: 315MHz-433.92MHz - Receiver sensitivity: -100dBm Code W0010 Available Price €1.09
Micro:bit Tinker Kit for micro:bit - Octopus sensors Micro:bit Tinker Kit - Create a variety of octopus sensors thanks to the Tinker kit and the many project tutorials to help you create dozens of amazing digital maker projects. Note: the micro:bit board is not included, you can buy it separately. All modules have convenient connectors to use them and no soldering is required. Code EL0106 Last items in stock Regular price €91.90 -€15.00 Price €76.90
Potentiometer B5K Linear 5K OHM kΩ Characteristic: - Tolerance: +/- 20% - Power: 0.125W Code K0066 Available Price €0.99
LCD TFT Display Screen 2.4 240x320 UNO Mega2560 SD LCD TFT Display Screen 2.4 240x320 UNO Mega2560 SD features:- LCD screen TFT 240x320 pixels- Power 2.8-3.3V- 262,000 possible colors (18 bit)- 8/16 bit parallel bus digital interface- LCD Controller: ILI9325- Touch screen controller: XPT2046- Touchscreen, resistive touch screen- Manual use or with any type of pointer- SD card reader- Connector: 2 x 20 pins 2.54mm- Dimensions PCB 75x55 mm- Dimensions LCD 59x42 mm- Ideal for projects with ARDUINO Uno Mega, AVR, STM Code P0005 Last items in stock Price €9.99
Micro:bit Starter Kit The Microbit Starter kit has provided 24 types of electronic components to help you get started. Micro:bit Starter kit can help your children enter a wonderful electronic world. Note: the micro:bit board is not included, you can buy it separately. Code EL0107 Available Price €35.90
2x Banana Connector Diameter 4mm Red and Black pack 2pcs 2x Banana Connector Diameter 4mm Red and Black features: - Length: 40 mm- Diameter plug: 4mm- Quantity: 2 units Code K0030 Available Price €0.79
RGB LED Strip WS2812B Black 1m 30 LED/M IP65 RGB LED Strip WS2812B Black 1m 30 LED/M IP65 features: - RGB LED WS2812B - WS2812B are LEDs that have integrated logic, making it possible to vary the color of each LED in a way individual - WS2812B includes a built-in inside each LED, which allows each pixel to be accessed individually - For this reason, these types of LEDs are called individually indexable. - They are based on the 5050 LEDs - 30 individually indexable LED diodes - 24-bit color control (8-bit PWM per channel) - 16.8 million colors per LED - Communication One-wire - Power: 5 V - Width: 11 mm - Thickness: 2.6 mm - Length: 1 meter - Consumption: 1.8A (all white) - Waterproof - With 3M adhesive Code P0101 Available Price €9.75
Smart Science IoT Kit : micro:bit climate sensor kit for IoT learning ELECFREAKS Smart Science IoT Kit is developed on the basis of loT:Bit, a new breakout board compatible with ultrasonic sensor, dust sensor, light sensor and water level sensor, including RTC Timing and WIFI module. It can build the scene such as air quality monitoring, environmental noise detection, environmental quality monitoring station, automatic watering detection, self-defence monitoring station and more. Code EL0109 Last items in stock Price €73.90
NEZHA 36 in 1 inventor kit for micro:bit NEZHA inventor kit for micro:bit develop your imagination and creativity with the Nehza 36-in-1 kit for micro:bit. Code EL0111 Last items in stock Regular price €180.49 -€30.50 Price €149.99
Female DC Power Connector Jack 2.1x5.5mm Jack connectors 2.1mm inside and 5.5mm outside to power devices such as LED strips, CCTV (Cameras), Arduino. Female DC Power Connector Jack 2.1x5.5mm features: - Ideal for connecting without welding- It has two screws in the tip for positive and negative cable screwdriver Code K0050 Available Price €0.49
Sensor Module FZ0888 IR Infrared Speed Meter Sensor Module FZ0888 IR Infrared Speed Meter features: - The FZ0888 encoder module is a device that can help you in the creation of your robotics and automation project, Whether you want to know the speed of a motor or its exact position - The module has a digital output (DO) which can be connected to your preferred microcontroller. The operating mode: - When the sensor is blocked, the DO output is high - The AO signal is not enabled in this module - Power supply: 3.3-5V - Power consumption current 20 mA max - PCB dimensions: 32 x 14 mm Code S0038 Available Price €1.89
Interactive Coding Accessory Pack The six+ cool projects in this kit will give children new insights into artificial intelligence while they are entertained. Note: the micro:bit board is not included, you can buy it separately. Code EL0113 Last items in stock Price €37.90
2x Cable Female - Female 4 Pins 4 Colors For connecting Arduino modules or boards. Ideal for your electronic projects, arduino, but can also be used with other microcontrollers. 2x Cable Female - Female 4 Pins 4 Colors features: - No soldering required - Circuits can be easily modified or revised - Quantity: 2 cables of 4 pins, female - female connector - Colors: red, black, blue, green - Pin pitch: 2.54mm - Cable lengths: 70cm For one rapid construction of a prototype of an electronic circuit. Code K0090 Available Price €0.99
Female to Female Cable 3 Pins 3 Colors Ideal for your electronic projects, Arduino, but can also be used with other microcontrollers. Code K0091 Available Price €0.95
micro:bit Smart Health Kit With the micro:bit Smart Health Kit you will build items such as UV light detections, sitting posture reminder, alcohol detector, smart bin and more, from which we can learn how to program and how to maintain healthy living habits in a scientific way. Code EL0116 Last items in stock Price €59.90
1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino 1 Channel Relay Module DC 5V 10A Low/High Trigger for Arduino features:- Channel: 1 (protected with Optocoupler)- Supply voltage: 5V- Output Current: 10A- Relay activation current: 15mA ~ 20mA- Insulation: Yes- Trigger signal type jumper (low / high)- LED indicator- Dimensions: 30x 54mm- Has a jumper that allows to choose type of trigger signal (low / high)- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL) Code RL001 Last items in stock Price €2.39
ELECFREAKS BitBoard Kit Turn everything into a "keyboard" thanks to the Bitboard. Code EL0117 Available Regular price €35.90 -€6.00 Price €29.90
Sensor TCRT5000 Infrared IR Tracker Line Obstacle Phototransistor Sensor TCRT5000 Infrared IR Tracker Line Obstacle Phototransistor features: - Operating range: 0.2mm to 15mm - Receiver: Phototransistor - Emitter: Infrared Led - Wavelength: 950 nm Code S0026 Available Price €0.50
Bluetooth Wireless Module 4.0 CC2541 Android IOS HM-10 BLE Arduino Android IOS Master Slave Bluetooth Modul for Arduino iOS Android. The HM10 supports Bluetooth 4.0 (low energy) and therefore has a relatively low power consumption. Code W0008 Available Price €17.89
Resistor 47R Ohm 5% 0,25W 1/4W Resistor 47R Ohm 5% 0,25W 1/4W features:- 47R Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0004 Available Price €0.08
Resistor 100R Ohm 5% 0,25W 1/4W Resistors 100R Ohm 5% 0,25W 1/4W features:- 100R Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0005 Available Price €0.08
CO₂ Humidity and Temperature Sensor - SCD40 (Qwiic) This SparkFun CO2, humidity and temperature sensor incorporates Sensirion's new generation of SCD40 photoacoustic CO2 sensors for highly accurate environmental readings. The sensor is capable of detecting concentrations from 0 to 40000 ppm with high precision above 400-2000 ppm ±(50 ppm+5%). The SCD40 has an integrated CMos® temperature and humidity sensor for greater precision. Code SP097 Last items in stock Price €74.95
ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi NodeMcu module based on ESP8266 controller and programming in Lua language NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC ESP8266-12E is an improved version of ESP8266-12 It works as a standard WiFi 802.11 b / g / n 2.4 GHz USB Communication - CP2102 Chip Characteristic: ESP 12E ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi features: - Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V) - Supported protocols: 802.11 b / g / n - Network support: 2.4 GHz - Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point - Integrated TCP / IP stack - PLL, regulators and integrated power management units - Output power: 0 , 15 (W); + 19.5dBm in 802.11b mode Code W0014 Available Price €4.95
Resistor 470R Ohm 5% 0,25W 1/4W Resistors 470R Ohm 5% 0,25W 1/4W features:- 470R Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0010 Available Price €0.08
Adaptador DIP para USBASP Programador AVR Atmega8 Atmega128 Standard ISP download port, for on-line programming. Built-in crystal oscillator circuit (8MHz), crystal are replaceable. Has reset push button, power reset push button. Code B0073 Available Price €3.92
Resistor 4,7K Ohm 5% 0,25W 1/4W Resistor 4,7K Ohm 5% 0,25W 1/4W features:- 4.7K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0017 Available Price €0.08
Resistor 2,2K Ohm 5% 0,25W 1/4W Resistor 2,2K Ohm 5% 0,25W 1/4W features:-2.2K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0015 Available Price €0.08
Module TCRT5000 Infrared Sensor IR Tracker Line Obstacle The optical module sensor (reflective) with comparator LM393, which detects obstacles with high precision. The ideal obstacle detection detector for the installation of smart robots. TCRT5000 - reflective optical sensor that has a compact construction where the light emitter and receiver are placed in the same direction to detect the presence of a object using infrared reflection on the object. The working wavelength is 950nm. The transmitter is infrared LED and the phototransistor receiver. By using LM393 comparator the module has a binary output (D0) that is at level 1 (object is detected). The sensor allows the detection of an object at a distance of up to 12 mm. Code S0025 Available Price €1.85
Resistor 5,6K Ohm 5% 0,25W 1/4W Resistor 5,6K Ohm 5% 0,25W 1/4W features:-5.6K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0019 Available Price €0.08
Red Laser Module 650nm 5mW Head Point Adjustable Focal Length Red Laser Module 650nm 5mW Head Point Adjustable Focal Length features: - Type: red laser diode- Laser type: point- Adjustable Focus- Wavelength: 650nm- Output power: 5mW- Operating voltage: 4.5-5V- Operating intensity: <40mA- Operating temperature: -30ºC to 60ºC- Dimensions of the emitter: Φ12x35mm- Cable length: 130mm Code M0042 Available Regular price €3.49 -€0.50 Price €2.99
Red Laser Cross Module 650nm 5mW Head Point Adjustable Focal Length Red Laser Cross Module 650nm 5mW Head Point Adjustable Focal Length features: - Type: red laser diode- Type of laser: cross- Adjustable Focus- Wavelength: 650nm- Output power: 5mW- Operating voltage: 4.5-5V- Operating intensity: <40mA- Operating temperature: -30ºC to 60ºC- Dimensions of the emitter: Φ12x35mm- Cable length: 130mm Code M0041 Available Price €3.95
5x Push Switch Button B3F Omron Red Key 12mm 5x Push Switch Button B3F Omron Red Key 12mm features:- 5x Push Buttons B3F Omron Key- Maximum current: 50 mA- Tension DC: 24V- Operating force: 1.27N- Switch terminals: weldable- Contact: SPST-NO- Contact resistance: 100M Ohm- Type of action: Superficial- Measures: 12x12x7.3mm Code K0073 Available Price €0.20
Original Atmel DIP-8 ATtiny85-20PU Tiny85-20PU Microcontroller IC Original Atmel DIP-8 ATtiny85-20PU Tiny85-20PU Microcontroller IC features:- Series: low power AVR®- Core Processor: AVR- Package / Case: 8-DIP- Core Size: 8-Bit- Speed: 20MHz- Connectivity: SPI- Number of I / O: 6- Program MemorySize: 8KB- Program MemoryType: FLASH- EEPROM Size: 512B- Voltage - Supply (Vcc / Vdd): 2.7V ~ 5.5 V- Data Converters: 10bit A / D, 4 chanels- Oscillator Type: External- Operating Temperature: -40 ° C ~ 85 ° C- RoHS: Yes- Quantity: 1 unit Code T0009 Available Price €3.95
TUYA IoT Interface for controlling Arduino over WiFi TUYA IoT interface module - you will be able to control your projects IoT Internet of Things interface of your Arduino. Tuya interface that allows you to control outputs of the Arduino module via WiFi network using apps for Android and iOS mobile devices. The device communicates with Arduino via UART interface, powered by 5V. Code WT017 Last items in stock Price €18.90
DS18B20 Submersible Probe Sensor Temperature Encapsulated with water resistant stainless steel with sensor dimensions 5,5 * 50mm, cable length 100 cm.DS18B20 Submersible Probe Sensor Temperature features:- Based on the DS18B20 chip- Supply voltage: 3 ~ 5.5V- Consumption <5mA- Measuring Range: -55 °C to 125 °C- Accuracy: +/- 0,5ºC- Outputs: - GND black - Red Vcc - Yellow digital output- Inocidable steel- Cable length: 1m Code S0019 Available Price €2.39
5x Push Switch Button B3F Omron Blue Key 12mm 5x Push Switch Button B3F Omron Blue Key 12mm features:- 5x Push Buttons B3F Omron Key- Maximum current: 50 mA- Tension DC: 24V- Operating force: 1.27N- Switch terminals: weldable- Contact: SPST-NO- Contact resistance: 100M Ohm- Type of action: Superficial- Measures: 12x12x7.3mm Code K0074 Available Price €0.21
2x IDC 10 female connector for flat cable AWG 1.27 2x IDC 10 female connector for flat cable AWG 1.27 features: - Number of pins: 10 - Pin Pitch: 2.54mm - Flat Cable Pin Pitch: 1.27mm - Quantity: 2 units Code K0001 Available Price €0.59
Silicone Case for HuskyLens When using the HuskyLens, you may encounter accidental drops, bumps, etc. Now we have carefully designed this silicone case to protect your board. Note: This product does not include the HuskyLens board. Code DF014 Available Price €6.99
SparkFun IoT RedBoard - ESP32 Development Board SparkFun IoT RedBoard development board compatible with Arduino. It incorporates an ESP32 chip with a 32-bit dual-core Xtensa LX6 microprocessor with a clock frequency of up to 240 MHz. It enables WiFi and Bluetooth wireless communication, making it versatile for Smart Home and IoT projects. Code SP048 Available Price €45.49
Gravity: Analog pH Sensor/Meter Kit DFRobot Gravity (SEN0161): The analogue pH meter is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. The DFRobot ph sensor is commonly used in various applications such as aquaponics, aquaculture and environmental water testing. The pH is a value that measures acidity or alkalinity. Code DF024 Last items in stock Price €45.90
40x Female-Female Cable 10cm 40x Female-Female Cable 10cm features: - Length: 10cm - Quantity: 40 cables - Dupont female connectors on both ends - Compatible with 2.54mm male connectors - High quality and good working conditions - Easy to install and use Code K1005 Available Price €1.99
Lot of 100unds White Nylon Clamps Lot of 100unds White Nylon Clamps features: - Plastic flange, polyamide 100x2.5mm plastic flanges - quantity: 100units Code K0259 Available Price €1.79
Sensor Module Moisture Earth Water Soil The module has two outputs: analog A0 and digital D0 Digital output D0 - signal 0 appears or 1 depending on the threshold setting The threshold is set with the potentiometer The sensor can be used for example: Automatic watering for potted plants With this module you will be able to measure the humidity of the soil, so that you will be able to control the humidity level of the soil of your plants Characteristic: Operation: 3.3V -5V - Sensitivity adjustable by potentiometer - Dual output mode: analog and digital - Red LED - power indicator - Green LED - indicator digital switching output - PCB measurements: 3 x 1.5 cm - Probe measurements: 6 x 3 cm Code S0021 Available Price €1.95