Resistor 100R Ohm 5% 0,25W 1/4W
  • Resistor 100R Ohm 5% 0,25W 1/4W

Resistor 100R Ohm 5% 0,25W 1/4W

D0005

Resistors 100R Ohm 5% 0,25W 1/4W features:
- 100R Ohm
-Type: Carbon film
-Tolerance: ±5%
-Power: 0.25W
-Dimensions: 2x7mm

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Resistor 100R Ohm 5% 0,25W 1/4W features:

-100R Ohm
-Type: Carbon film
-Tolerance: ±5%
-Power: 0.25W
-Dimensions: 2x7mm

Data sheet

Resistencia [Ohm]
100
Tolerancia
0.05
Cantidad
100

Customers who bought this product also bought

Silicone Thermal Conductive Paste H 0.5g

Silicone Thermal Conductive Paste 0.5g Heatsink 3D features:
It facilitates the transfer of heat between the electronic components and the radiator.
It's necessary for the correct operation of any type of temperature sensors.
Is characterized by a very good chemical resistance for oxidation, water solutions of acids, alkalis and salts, sulfur dioxide and ammonia. It has a very wide range of working temperatures.
-Density at 20°C: 2.58 G/cm3
-Points: 350°C
-Freezing point: -50°C
-Coefficient of refraction: 1.405,
- Specific temperature at 50°C: 0.243 Cal/g K
-Co-efficient global heat transfer at 0-150°C: 0.88 W/m K
-Constant dielectric at 100 Hz: 4.7 (± 0.1)
-Cross resistance: 5x10 to power 14 Ohm x cm

Q0080

Price €0.49

L293D Motor Drive Shield Expansion Board

It allows controlling many different types of engines: - Up to 4 bidirectional current motors
- Up to 2 stepper motors (unipolar or bipolar) In addition it is provided with two connectors for servos.                   L293D Motor Drive Shield Expansion Board features:
- Minimum operating voltage: 4.5 V
- Maximum operating voltage: 36 V
- Maximum current: ± 1.2 A (650mA)
- Logic voltage: 5V
- Controller L293D
- Measures: 70x55x20 mm L293D controller consists of 4 H bridges with 650 mA current with thermal protection.
Pull-down resistors keep the motors off during startup.

R0001

Price €2.44

8 Channel 5V 10A Relay Module Arduino compatible

5V Relay Module with 8 opto-coupled channels.
This module can be directly controlled by the microcontroller ( Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL).
8 Channel Arduino 5V 10A Relay Module features:

- Channels: 8 (independent protected with Optocouplers)
- Supply Voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Isolation: Yes
- LED indicator: For each channel
- Dimensions: 54x 135mm

RL008

Price €7.84

5x Strip 16 Pin Female Short

5x Strip 16 Pin Female Short features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Through
- Quantity: 5 units of strips of 16 female pins each

K0141

Price €0.21

LEONARDO R3 ATmega32u4 board + Arduino compatible USB cable

It has an Atmega32u4 chip running at 16Mhz with a factory-loaded bootloader.
The Leonardo module has all the connectors that the Arduino Leonardo R3 and is compatible with all Arduino shields. LEONARDO R3 ATmega32u4 board + Arduino compatible USB cable features:
- ATmega32u4 microcontroller,
- Operating voltage 5V,
- Power (recommended) 7-12V,
- Digital pins I / O 20 (of which 7 can be used as PWM outputs),
- Analog input pins 12,
- DC current through I / O Pin 40 mA,
- DC current for pin 3.3V 50 mA,
- Flash memory 32 KB (of which 4 KB are used by the bootloader),
- SRAM 2.5 KB,
- EEPROM 1 KB, - Clock speed 16 MHz,
- Interface: UART, USB, SPI, I2C,
- USB communication - Atmega32u4,

B0004

Regular price €9.01 -€2.00 Price €7.01
€0.07

0,07 tax excl.

1

Volume discounts

Quantity Unit price without tax
10 0,04 €
100 0,02 €
30+ items
Price €0.07

Order until 4pm we will send today
30 days return