Relay Module DC 5V 10A 2 Channel Low/High Trigger
  • Relay Module DC 5V 10A 2 Channel Low/High Trigger

Relay Module DC 5V 10A 2 Channel Low/High Trigger

RL002

Relay Module DC 5V 10A 2 Channel Low/High Trigger features:
- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator: For each channel
- Dimensions: 40x 50mm
- It has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

OEM
5905323233911
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Relay Module DC 5V 10A 2 Channel Low/High Trigger features:


- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator: For each channel
- Dimensions: 40x 50mm
- It has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

Data sheet

Voltages
5V
Número de canales
2

Customers who bought this product also bought

JST PHR-2 Connector Male 2 PIN 2mm

It is not possible to reverse the polarity by mistake.
JST PHR-2 Connector Male 2 PIN 2mm features:
Manufacturer JST Connector series: PH Connector: female connector Connector class: male Connector type: conduit-board Contactor raster: 2mm Number of pins: 2 Electrical mounting: THT Voltage Working: 100V Working current: 2A Working temperature: -25 ... 85 ° C Spatial orientation: vertical technical data sheet PH series

K0211

Price €0.24

DRV8825 + Radiator Stepstick Stepper Driver Motor Pololu 3D Printer

It has an automatic voltage regulator, which for practical purposes results in quieter operation and less vibrations.
Characteristic:
- Minimum operating voltage: 8 V
- Maximum operating voltage: 45 V
- Maximum current: ± 2.5 A (24V, adequately ventilated or refrigerated)
- Logic voltage: 3 V / 5.5V
- Microstep resolution: full, 1/2, 1/4, 1/8 , 1/16, 1/32
- Factory soldered temples
- 4-layer PCB, 2 oz. Copper for improved heat dissipation
- Short-circuit and overtemperature protection - Use potentiometer to adjust the current
- Measurements: 20x16x12 mm

I0012

Price €2.88

Raspberry Pi Pico GPIO Expansion Board

The Raspberry Pi Pico GPIO Expansion Board is an advanced product with a 3.3V output voltage that allows you to easily work on the GPIO pins of your Pico, via two ways (male and female header). Ideal for using both male and female jumpers/bridge cables.

RA125

Price €7.40

Power Supply Transformer 220V AC/DC 1A 9V

Power Supply Transformer 220V AC/DC 1A 9V features:
- Input voltage: 100 ~ 240V 50Hz
- Output voltage: DC 9V
- Output current: 1A
- DC connector: 5.5 mm x 2.1 mm
- Cable length: Approx. 90 cm
- Indicator of operation: LED diode

A0067

Price €3.30

Mosfet 24V 5A IRF520 PWM controller

Mosfet 24V 5A IRF520 PWM controller features:
- The IRF520 controller module can control the PWM signal from the Arduino module and adjust the DC voltage of So that we can control the speed of the DC motor, the brightness of the bulb, the LEDs, the heater.
- The built-in IRF520 N-MOSFET transistor
- Operating voltage: 3.3V -5V ( compatible with ARDUINO Raspberry PI)
- Charging voltage: 0-24V
- Charging current: up to 5A (more than 1A, the system must be equipped with a heat sink point)
- 60W max power (more than 10W must be equipped with a heat sink)
- Terminalblock connectors
- LED indicating the presence of power
- Dimensions: 33x24mm

A0022

Regular price €2.06 -€0.50 Price €1.56

MG996R Metal Gears Digital Servo High Power Equivalent 12Kg 6V

High power digital servo, better precision than the MG995. MG996R Metal Gears Digital Servo High Power Equivalent 12Kg 6V features:
- Operating voltage: 4.8 V to 7.2 V
- Consumption: 100mA
- Torque max.: 12kg / cm (6V)
- Operating speed: 0.22sec / 60degree (4.8V), 0.19sec/60degree (6V)
- Max. Radio: 180ºC
- Temperature range: 0-55 degrees
- Weight: 55 g
- Cable length: 29cm
- Dimensions: 54 x38x 20 mm
- Servo connector: JR (JR and Futaba adaptable)

R0016

Regular price €7.40 -€1.00 Price €6.40

Peltier Ceramic Cell TEC1 12706 12V 60W

Peltier Ceramic Cell TEC1 12706 12V 60W features:
- Max Power: 60w
- Voltage: 12v
- Max Voltage: 15,2v
- Max Current: 6A
- Temperature Variation: - Peltier effect cell model TEC1-12706, 12v, max 60w and 6A, with a temperature difference between their faces of up to 67ºC

M0055

Price €3.26

TTL Level Converter 5V - 3.3V IO LJ245A

TTL level conversion module 5V 3.3V IO Single Interchange Compatible I2C SPI.
Use of high-speed dual-level IT supply level translator chip design. TTL Level Converter 5V - 3.3V IO LJ245A features:
- Main chip: Octal bus transceiver and change from 3.3-V to 5-V with outputs of 3 states LJ245A of Texas Instrument
- VCCA power supply voltage: 4.5 - 5.5 VDC
- VCCB power supply voltage: 2.7 - 3.6 VDC
- Low level input voltage V (IL): 0.8 V
- High-level input voltage V (IH): 2 V
- Low level output current I (OL): 12 - 24 mA
- High level output current I (OH): -24 - -12 mA
- 8 channels allow the conversion of the IO communication level
- Channel levels A and B are controlled by VCCA and VCCB

C0017

Price €3.26

Related articles on blog

€2.60

2,60 tax excl.

1
22 items
Price €2.60

Order until 4pm we will send today
30 days return