Components and sensors

2x Electronic Clips Crocodile 2x50mm Black + Red features:
- Length: 50mm
- Quantity: 2 units

2x Banana Connector Diameter 4mm Red and Black features:
- Length: 40 mm
- Diameter plug: 4mm
- Quantity: 2 units

Jack connectors 2.1mm inside and 5.5mm outside to power devices such as LED strips, CCTV (Cameras), Arduino. Female DC Power Connector Jack 2.1x5.5mm features:
- Ideal for connecting without welding
- It has two screws in the tip for positive and negative cable screwdriver

2x IDC 10 female connector for flat cable AWG 1.27 features:
- Number of pins: 10
- Pin Pitch: 2.54mm
- Flat Cable Pin Pitch: 1.27mm
- Quantity: 2 units

Alligator clip connectors Red and  Black.

Ideal to power your Arduino board through the power input.
Adapter Battery 9V 6F22 Jack Connector DC features:
- Cable 7cm long
- Battery connector 9V, 6F22
- Male connector DC 5.5 / 2.5

3.5mm Mini Jack Chassis Panel Mount Earphones Stereo Front Connector features:
- Quantity: 1 unit
- 3.5mm jacks for mounting on flat surfaces
- 3-pole connectors suitable for use with headphones and other stereo audio equipment
- Termination method: welding
- Color: gold / black

Plastic Housing DB9 DB15 Cover Connector RS232 D-SUB features:
- Plastic housing for DB9 DB15 connector

Banana Connector Plug 4mm Male Red features:
- Test Plug Arduino Robot PCB

Crocodile Clip 30A 2x75mm Black + Red features:
- Length: 75mm
- Handle length: 38mm
- Isolated
- Quantity: 2 units

10x Ring Terminals Isolation features:
- M3.5 Cable connector 0.5-1.5 mm2
- Max current 19A
- Isolated
- Quantity: 10 units

Terminals Fork Isolation features:
- M3.5 Cable connector 0.5-1.5 mm2
- Max current 19A
- Isolated
- Quantity: 10 units

Female Strip 40 Short Pins features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Pasante
- Quantity: 1 unit of strips of 40 female pins each

5x Female Strip 20 Short Pins features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Pasante
- Quantity: 5 units of strips of 20 female pins each

5x Strip 16 Pin Female Short features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Through
- Quantity: 5 units of strips of 16 female pins each

10x Strip 8 Pin Female Short features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Through
- Quantity: 10 units of strips of 8 female pins each

10x Strip 6 Pin Female Short features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Through
- Quantity: 10 units of strips of 6 female pins each

15x Strip 5 Pin Female Short features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Through
- Quantity: 15 units of strips of 5 female pins each

15x Strip 4 Short Female Pins features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Pasante
- Quantity: 15 units of strips of 4 female pins each

3-Pin Female PCB Header Short Strip features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Through

Dupont Connector 2.54mm Female features:
- Connector for soldering or crimping
- Lot 100 units
- Ideal for your projects electronic, arduino, but can also be used with other microcontrollers

Dupont Connector 2.54mm Male features:
- Connector for soldering or crimping
- Lot 100 units
- Ideal for your projects electronic, arduino, but can also be used with other microcontrollers

Jack connectors 2.1mm inside and 5.5mm outside to power devices such as LED strips, CCTV (Cameras), Arduino. Connector Jack 2.1x5.5mm Power Supply DC Male features:
- Ideal for connecting without welding
- It has two screws in the tip for positive and negative cable screwdriver

Inlet Module Plug Fuse Switch 220V C14 3D Printer features:
- Voltage and current of 10A, 250V AC
- Plug type - 3 pins IEC320 C14
- Color of the red switch
- Diameter holes 40 mm
- Distance between holes 39mm
- Size 47 x 27 mm
- Total size of 58 x 50 x 34 mm

Male 40 Pin Header 1x40 features: Type: Male, Insertion position: Vertical, Separation between pins: 2.54mm

15x Strip 2 Short Female Pins features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Pasante
- Quantity: 15 units of strips of 2 female pins each

Jack Stereo 3.5mm Female Connector Chassis 5P features:
- Type: Stereo
- Welding connections
- 3.5 mm connector for PCB mounting

5x Strip Simple Row Male 40 Pins Header Various Colors features:
- Type: Male
- Insertion position: Vertical
- Separation between pins: 2.54mm
- Quantity: 5 strips of 40 pins Male each

20 Mini Jumpers 2.54mm Short Circuit Board PCB features:
- Mini standard 2.54mm jumpers for making short circuit bridges on printed circuit boards, hard disks, PCBs, etc.

3x DC PCB Socket Connector 5.5 x 2.1 features:
- Type: DC female jack
- Diameter of the pin: 2,1mm
- Diameter of the connector: 5.5mm
- Quantity: 3 units

Male Double Row 80 Pin Header 2x40 features:
- Type: Male
- Insertion position: Vertical
- Separation between pins: 2.54mm
- Quantity: 1 unit 2x40 pins

2x Female 40-Pin Long Strip features:
- Pin spacing: 2.54mm
- Pin length: 10.5mm
- Insert position: vertical - Insertion: through
- Quantity: 2 units of female strips of 40 pins each

10x Female Strip 10 Long Pins features:
- Pin spacing: 2.54 mm
- Pin length: 10.5 mm
- Insertion position: Vertical
- Insertion: Through
- Quantity: 10 units of female strips of 10 pins each

10x 8-Pin Long Female Strip features:
- Pin spacing: 2.54mm
- Pin length: 10.5mm - Insertion position: Vertical
- Insertion: Through
- Quantity: 10 units of 8-pin female strips each

10x Long 6-Pin Female Strip features:
- Pin spacing: 2.54 mm
- Pin length: 10.5 mm
- Insertion position: Vertical
- Insertion: Through
- Quantity: 10 units of female strips of 6 pins each

15x Long 4-Pin Female Strip features:
- Pin spacing: 2.54 mm
- Pin length: 10.5 mm
- Insertion position: Vertical
- Insertion: Through
- Quantity: 15 units of female strips of 4 pins each

Characteristic: -No. of pins: 10
-Pin Pitch: 2.54mm
-Length: 300mm
-quantity: 1 unit

Connector with 80pins in double rows 2x40, ready to break and with 90 ° angle for vertical use.

Connector BLS02 Female/Female 2 Pins RoHS Single Row features:
- Step between pins: 2.54 mm
- Manufacturer: Maritex
- Number of connections: 2 in a single row
- Type: female / female
- RoHS standard

Connector BLS03 Female/Female 3 Pins RoHS Single Row features:
- Step between pins: 2.54 mm
- Manufacturer: Maritex
- Number of connections: 3 in a single row
- Type: Female / Female
- RoHS standard

Connector BLS04 Female / Female 4 Pins RoHS Single Row features:
- Step between pins: 2.54 mm
- Manufacturer: Maritex
- Number of connections: 4 in a single row
- Type: Female / Female
- RoHS standard

Connectors 10x BLS05 Female/Female 5 Pins RoHS Single Row features:
- Step between pins: 2.54 mm
- Manufacturer: Maritex
- Number of connections: 5 in a single row
- Type: female / female
- RoHS standard

Connectors 10x BLS06 Female / Female 6 Pins RoHS Single Row features:
- Step between pins: 2.54 mm
- Number of connections: 6 in a single row
- Type: female / female
- RoHS standard
- Quantity: 10 units

15x FEMALE STRAIGHT 2 LONG PINS features:
- Pin spacing: 2.54mm,
- Pin length: 10.5mm,
- Insert position: vertical,
- Insertion: pass-through,
- Quantity: 15 units of female strips of 2 pins each.

10x Strip 10 Short Female Pins features:
- Pin spacing: 2.54mm
- Insert position: Vertical
- Insert: Through
- Quantity: 10 units of strips of 10 female pins each

Printed Circuit Board Terminal 2 poles 5mm pitch features:
Number of contacts: 2
Step: 5mm
Number of rows: 1
Mounting Type: PCB
Gender: Male
Allowable Section: 1.5mm2 (22-14 AWG)
Termination Method: Screw
Type: Screw Terminal Block Nominal current: 16A
Nominal voltage: 250V
Color: gray
Material: Nylon 66
Depth: 10mm
Width: 7.5mm
Length: 10mm

Connectors BLS01 Female/Female 1 Pin RoHS Single Row pack 20pcs features:
- Number of connections: 1 in a single row
- Type: female / female
- RoHS standard

USB Connector, Shielded, Micro USB Type B, USB 2.0, Receiver, 5 Way, Surface Mount features:
- Application: for mounting on PCB boards,
- Signal contacts 1.0A,
- Contacts power 1.8A,
- Maximum supported voltage: 30 VAC (RMS)
- Component type: USB 2.0 Micro-B receptacle
- Color: gray,
- Female connector,
- Nailed to mating part: yes,
- Locking to mating part: no,
- Connector material: Copper and metal alloy,
- Material of Pins: Gold Alloy,
- Orientation: Right Angle,
- PCB Retention: None,
- Pitch - Mating Interface: 0.65mm,
- Pitch - termination interface: 0.65mm,
- Port: 1,
- Surface Mount Compatible (SMC): yes,

USB 2.0 female connector type B right angle with input / output interface High-speed, shielded to ensure greater EMI / RFI protection and pluggable in hot environments.
USB 2.0 Type B female connector features:
- Application: for mounting on PCB boards, RF communications
- Black thermoplastic housing
- Tin-plated housing,
- Contact material: alloy cover
- Female connector, - USB 2.0 Type B,
- Mounting Type: THT,
- Connector Mounting: Through Hole,
- Orientation: Right Angle,
umber of Positions: 4 ways,
- Port 1,
- Working temperature: -40 ° C - + 85 ° C,
- Contactor coverage: gold,
- Resistance of contact ‰ ¤ 30 mΩ
ominal current ‰ ¤ 1 A
ominal voltage 30 V AC

Power supply fixing to chassis with 2.4 mm central PIN.
Characteristic:
- Contact resistance 50 mOhm
- Insulation resistance 100 MOhm at 500 V DC
- Welding heat resistance 260ºC ± 5ºC ± 3 seconds
- Duration 5,000 cycles (25 x minute)
- Insulation dielectric strength 260 V ~ / 1 minute
- Material PBT 15% PV - UL94-V0
- Flammability UL94 V-0
- Fixed contact material, tin plated brass
- Flexible contact material, tin plated brass
- Central pin material, tin plated brass - Center contact diameter 2'4 mm - Quantity: 1.

Insulated connectors set 175 pcs. 18 types
Set of insulated connectors 175 units 18 types features:
Dimensions of the plastic box:
- Width: 280 mm
- Depth: 185 mm
- Height: 42 mm
Technical data of the connectors:
- Material: tinned steel
- Insulation: PVC

9-way mounting solder sub-D female connector.
9-pin female sub-D connector for soldering features:

- Nominal voltage: 500 VAC
- Nominal current: 5 A
- Number of ways: 9
- The connectors are Supplied with stamped and formed contacts
- Straight female connector
- Tin-plated and notched housings offering good grounding and continuity
- Tin-plated solder barrel terminations
- Good EMI / RFI protection
- Insulating material: fiberglass polyester

9 way mounting solder sub-D male connector.
9-pin male sub-D connector for soldering in copper alloy features:

- Nominal voltage: 500 VAC
- Nominal current: 5 A
- Number of ways: 9
- The connectors are supplied with stamped and formed contacts
- Straight male connector
- Tin-plated and notched housings offering good grounding and continuity
- Tin-plated solder barrel terminations
- Good EMI / RFI protection
- Insulating material: fiberglass polyester

Sub-D female connector 26 pins THT for soldering with a 90 ° spatial orientation with threads as far as the male connector with screws connects.
Sub-D connector 26-pin female THT with 90° angle thread features:
- Female connector
- Number of pins: 26 - Connector type: D-Sub HD
- Interlocking system: screws
- Spatial orientation: 90 ° angular
- Electrical mounting: THT
- Thread: UNC4-40
- Contactor material: brass
- Contactor coverage: gold
- Insulation material: polyamide

25 way mounting solder sub-D male connector.
25-pin male sub-D connector for soldering in copper alloy features:

- Nominal voltage: 500 VAC
- Nominal current: 5 A
- Number of ways: 25
- The connectors are supplied with stamped and formed contacts
- Straight male connector
- Tin-plated and notched housings offering good grounding and continuity
- Tin-plated solder barrel terminations
- Good EMI / RFI protection
- Insulating material: fiberglass polyester

Standard 9.4mm THT blue 15-pin Sub-D male connector for soldering in 90 ° spatial orientation with threads on the the male connector with screws is connected.
Blue 15-pin standard THT male connector 9.4mm with 90° angle thread features:
- Color: blue
- Connector male
- Number of pins: 15
- Connector type: D-Sub HD
- Connection version: 9.4 mm
- Interlocking system: screws - Spatial orientation: 90 ° angled
- Electrical mounting: THT
- Thread: UNC4-40
- Contactor material: brass
- Contactor coverage: gold - Insulation material: polyamide - Working temperature: -55 ° C - + 105 ° C

The USB (Universal Serial Bus), is an industrial standard bus that defines the cables, connectors and protocols used in a bus to connect , communicate and supply power between computers, peripherals and electronic devices.
This female type B USB connector adapter soldered on a PCB board is ideal for use in your projects.
It has connection points where you can easily solder some pins to connect it directly to a breadboard, or solder a cable over those same connection points.
USB Type B Female 2.0 Connector Adapter with PCB features:
- Connector type: USB Type B Female,
- Internal color: White,
- Nominal voltage: 30v DC,
- Maximum current: 1A DC,
- Insulation resistance: 1000Mohm,
- Operating temperature: -25ºC to + 85ºC,

The 2.5mm female jack connector is a connector to provide power to computers, LED TVs, routers, etc ...
This 2.5mm female jack connector adapter soldered on a PCB board, is ideal for use in our projects.
It has connection points where we can easily solder some pins to connect it directly to a breadboard, or solder a cable over those same connection points.
Adapter 2.5mm female power jack with PCB features:
- Connector type: 2.5mm female jack ,
- Color: black,
- Nominal voltage: 12v DC,
- Maximum current: 0.5A DC,
- Insulation resistance: ‰ ¥ 100MΩ,
- Operating temperature: -25ºC to + 85ºC,
- Number of output pins: 3
- Pitch between output pins: 2.54mm.

3.5mm Audio Jack Breakout Headphone Video Audio MP3 Jack Module. This female jack connector adapter 3.5mm audio soldered on a PCB board, it is ideal to use in our projects. TRRS connectors are the audio-style connectors seen on some phones, MP3 players and development boards. TRRS stands for "Tip, Ring, Ring, Sleeve", reflecting the fact that unlike a standard stereo connector, this one actually has three conductors and a ground. 

It is not possible to reverse the polarity by mistake.
JST PHR-2 Connector Male 2 PIN 2mm features:
Manufacturer JST Connector series: PH Connector: female connector Connector class: male Connector type: conduit-board Contactor raster: 2mm Number of pins: 2 Electrical mounting: THT Voltage Working: 100V Working current: 2A Working temperature: -25 ... 85 ° C Spatial orientation: vertical technical data sheet PH series