Relay Module 1 Channel 5V 10A
  • Relay Module 1 Channel 5V 10A

Relay Module 1 Channel 5V 10A

RL005

1 Channel 5V Relay Module.
This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL).
Relay Module 1 Channel 5V 10A features:

- Channel: 1
- Supply Voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- LED indicator
- Dimensions: 30x 54mm

OEM
5905323234536
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Relay Module 1 Channel 5V 10A description

1 Channel 5V Relay Module.
This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL).

Relay Module 1 Channel 5V 10A features:



- Channel: 1
- Supply Voltage: 5V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- LED indicator
- Dimensions: 30x 54mm p>

Data sheet

Voltages
5V
Número de canales
1

Customers who bought this product also bought

E18-D80NK Infrared Obstacle Avoidance Sensor Module 3-80cm Smart Car

Ideal for projects with ARDUINO, Smart Car
Detects transparent and translucent obstacles
E18-D80NK Infrared Obstacle Avoidance Sensor Module 3-80cm Smart Car features:
- Current consumption: up to 100 mA
- Supply voltage 5V
- Current consumption <25mA
- Response time of 2 ms
- Measured distance: 3-80cm 15st angle
- Screw to adjust the sensitivity, the back
- Output status led indicator
- Operating temperature: -25°C - + 55°C
- Material: high-strength plastic
- Type of output: normally open, NPN
- Dimensions: 18 mm in diameter, Length 45 mm
- Cable length 55cm
- Departures:
      - Brown: +
      - Blue: -
      - Black: OUT

S0004

Price €5.74

Starter Kit XXL UNO R3 Arduino compatible

Perfect kit to learn programming in the middle of Arduino the basic of electronics It allows to build various projects of various complexity, from the easiest ... to the most complicated.
The elements are placed in the box to keep everything in order.   Characteristic:   It includes the following module references:   - 1x UNO R3 Rev3 ATmega328 ATmega16U2 Development Board Arduino Module - 1x LED Display Screen Controller Blue Backlight 16x2 1602 HD44780
- 1x Prototype Protoboard MB-102 830 points Arduino
- 1x ProtoShield Prototype Expansion Board with Mini Breadboard 170 points for Arduino Proto V5.0
- 1x 74HC595 74595 SN74HC595N 8-Bit Shift Register DIP-16
- 1x LM35 Temperature Sensor LM35DZ TO92
- 2x SW-520D Vibration Tilt Sensor

B0037

Regular price €55.36 -€8.36 Price €47.00

LED Display 2-Digit 7-Segment Red Common Cathode

LED Display 2-Digit 7-Segment Red Common Cathode features:
- Supply voltage of the segments: 3 VDC
- LED color of the segments: red
- Digit length: 14.2mm
- Digit width: 8.1mm
- Pin numbers: 10
- Diameter of pins: 0.51mm
- Step between pins: 2.54mm
- Consumption current per segment: 30mA
- Maximum admissible current per segment: 70mA
- Direct current by segment (pulse operation): 30mA
- Number of digits: 2
- Segment numbers by digit: 7
- Operating temperature: -25°C - + 85°C
- Storage temperature: -30°C - + 85°C
- Screen with common cathode connection
- Screen size: 25x19x8 mm
- This product is a 2-digit screen composed of 7 red LED segments with excellent brightness and features:.

P0120

Price €1.23

ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi

NodeMcu module based on ESP8266 controller and programming in Lua language
NodeMcu is equipped with 10 GPIO, PWM, I2C, 1-wire and ADC
ESP8266-12E is an improved version of ESP8266-12
It works as a standard WiFi 802.11 b / g / n 2.4 GHz
USB Communication - CP2102 Chip
Characteristic:
ESP 12E ESP8266 ESP12E NodeMcu Lua Wireless Development Board CP2102 WiFi features:

- Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz) - Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP stack
- PLL, regulators and integrated power management units
- Output power: 0 , 15 (W); + 19.5dBm in 802.11b mode

W0014

Price €4.09

Micro Bits for 3D Printer Nozzle pack 10pcs

Kit of Micro Steel Drill Bits to eliminate jams in nozzles of 3D printers, CNC
Characteristic:
- Diameter: 0.2 / 0.3 / 0.4 mm
- Shank diameter approx. 3,2mm
- Total length approx. 38mm
- Material: Steel
- Quantity: 10 units
- High quality drill bits for making custom nozzles or cleaning block nozzles
- 3D printer bits - Drilling and cleaning of nozzles - 0.2 0.3 0.4 mm - RepRap

I0060

Price €4.06

Related articles on blog

€1.07

1,07 tax excl.

1
30+ items
Price €1.07

Order until 4pm we will send today
30 days return