Resistor 2,2K Ohm 5% 0,25W 1/4W Resistor 2,2K Ohm 5% 0,25W 1/4W features:-2.2K Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0015 Available Price €0.08
Quartz Crystal Oscillator 16 MHz Quartz Crystal Oscillator 16 MHz features:- Low Profile Crystal Oscillator- Type: Quartz Crystal 16 MHz- Frequency: 16 MHz- Format: Low profile- Assembly: Intern Code E0012 Available Price €0.29
Micro SD Card Reader/Recorder The micro SD card reader module is a simple solution for transferring data to and from a standard micro SD card.The pinout is directly compatible with Arduino, but it can also be used with other microcontrollers.Ideal for projects with ARDUINO, PIC, AVR, STM32.Micro SD Card Reader/Recorder features:- Supply voltage: 4.5V- 5.5V- Adjustable 3.3V built-in regulator for SPI pins- Consumption <200mA- Interface: SPI- Dimensions: 24mmx 42mm x 12mmSupports microSD cards (up to 2G) and micro SDHC (up to 32G) Code M0006 Available Price €2.49
2x Sensor TCRT5000 Infrared IR Tracker Line Obstacle Phototransistor 2x Sensor TCRT5000 Infrared IR Tracker Line Obstacle Phototransistor features: - Operating range: 0.2mm to 15mm - Receiver: Phototransistor - Emitter: Infrared Led - Wavelength: 950 nm - Quantity: 2 units Code S0026 Available Price €0.50
40x Male to male cables 10cm 40x Male to male cables 10cm features: - Length: 10cm - Quantity: 40 cables - Dupont male connectors on both ends - Compatible with 2.54mm female connectors - High quality and good working condition - Easy to install and use Code K0107 Available Price €1.99
LED 10-Segment Bar Graphics Display Red LED 10-Segment Bar Graphics Display Red features: - Bargraph LED display - Number of segments: 10 - Size: 5mm - Dimensions: 25x10mm - Material GaAsP / GaP - Color: red - Wavelength: 635 nm - Vf / forward /2.1 V - I fw / forward / 30 mA - Iv / Ifw = 20mA / 4 mcd - Number of terminals: 20 Code P0100 Available Price €1.13
RFID Module with Card and Pendant It is compatible with almost any microcontroller, Arduino, PIC, AVR.It can be used in Access Control projects and Alarm projects. RFID Module with Card and Pendant features: - Supports Quick CRYPTO1 and MIFARE- Operating current: 13-26mA at 3.3V- Standby current: 10-13mA to 3.3V- Sleep-mode current: <80μA- Maximum current: 30mA- Frequency of operation: 13.56Mhz- Reading distance: 0 to 60mm- Communication protocol: SPI- Maximum SPI speed: 10Mbit / s- Maximum data rate: 10Mbit / s- Operating temperature: -20 to 80ºC- Humidity of operation: 5% -95% Code M0015 Available Price €2.79
DS1302 Real Time Clock RTC Module AVR ARM PIC Ideal for projects with ARDUINO you can use it with PIC, AVR, STM32.Provides seconds, minutes, time and date, calendar up to the year 2100.DS1302 Real Time Clock RTC Module AVR ARM PIC features:- Chip: DS1302- Power supply: 2V-5V- Operating current: <2mA- Dimensions: 44 x23 x 8mm- Battery not included in this sale- Connect the RTC to your ArduinoVCC -> Arduino + 3.3VGND -> Arduino GndCLK -> (SCLK_PIN)DAT -> (IO_PIN)RST -> (CE_PIN) Code M0014 Available Price €1.96
4x AA 6V battery holder with DC connector 4x AA 6V battery holder with DC connector features: - Cable 12cm long - Measurements 62x56x 16mm - Battery length max 50mm - Compatible batteries ( LR06, R06, MN1500, AM3, UM3, HP7) Code PP04 Available Price €1.79
5x 9v Battery Adapter Connector 6F22 with Cable Ideal to power your Arduino board through the power input. 5x 9v Battery Adapter Connector 6F22 with Cable features: - Cable 15cm long - Battery connector 9V, 6F22 Code PP013 Available Price €0.99
Lithium Battery Holder Button 3V CR1220 THT PCB Lithium Battery Holder Button 3V CR1220 THT PCB features: - Material: - Contact: Phosphor Bronze- Electric: - Type: THT - Contact Resistance: 30 Milliohms Max - Insulation Resistance: 1000 Mega Ohms Min - Dielectric Voltage: 500V AC one sec level - Operating Temperature: -25 „ƒ - 85 „ƒ- Suitable for Computer Memory, Power transfer, Communications Power System, PC Application, Armamentarium, Motherboard Code PP33 Available Price €1.19
Battery holder 2x AA Battery holder with switch Includes a switch to output the voltage built into the case itself. It has a cover to protect the batteries. The cover has perforation in case you want to secure it with a screw (not included). Battery holder 2x AA Battery holder with switch features: - Cable 15cm long - Measurements 68x 32x 18mm - Battery length max 50mm - Compatible batteries (LR06, R06, MN1500, AM3, UM3 , HP7) Code PP005 Available Price €1.39
Battery Compartment 9V 6LF22 Power cable Battery Compartment 9V 6LF22 Power cable features: - Cable 17cm long- DC connector 5.5 / 2.5mm- Dimensions 54x 30x 20mm- Batteries 6LR61, 6LF22, X22 or compatible- It has 3 holes for anchoring to plate or chassis Code PP010 Available Price €1.19
Battery holder 4x AAA 6V Characteristic: - Cable 13cm long - Measurements 49x 52x 13mm - Battery length max 44mm - Compatible batteries (LR03, 24A, R03, RX03, MN2400, AM4, UM4) Code PP001 Available Price €1.19
Battery holder 2x CR2032 Switch Characteristic: - Button cell battery - For 20mm diameter battery type CR2032 - ON / OFF switch - Dimension: 50mm (L) x 23mm (W) x 6mm (D) Code PP23 Backorder Price €1.19
4x 18650 3.7V Parallel Lithium Battery 4x 18650 3.7V Parallel Lithium Battery features: - Cable 10cm long - Measures 80x76x 20mm - Stack length max 67mm Code PP017 Available Price €2.89
4x AA battery holder 4-battery holder with 6V switch Includes a switch to output the voltage built into the case itself. It has a cover for protect the batteries. The cover has perforation in case you want to secure it with a screw (not included). Characteristic: - Cable 12cm long - Measures 70x 65x 18mm - Battery length max 50mm - Compatible batteries (LR06, R06, MN1500, AM3, UM3, HP7) Code PP006 Available Price €1.99
Battery holder 1x 18650 PCB mount 18650 battery base for soldering to PCB. Characteristic: - Measurements 78x 20x 21mm - Weight: 10 gr. ( approx.) - Stack length max 67mm Code PP053 Available Price €1.99
4x AA 6V battery holder with DC connector 4x AA 6V battery holder with DC connector features: - Cable 12cm long - Measurements 62x56x 16mm - Battery length max 50mm - Compatible batteries ( LR06, R06, MN1500, AM3, UM3, HP7) Code PP04 Available Price €1.79
5x 9v Battery Adapter Connector 6F22 with Cable Ideal to power your Arduino board through the power input. 5x 9v Battery Adapter Connector 6F22 with Cable features: - Cable 15cm long - Battery connector 9V, 6F22 Code PP013 Available Price €0.99
Lithium Battery Holder Button 3V CR1220 THT PCB Lithium Battery Holder Button 3V CR1220 THT PCB features: - Material: - Contact: Phosphor Bronze- Electric: - Type: THT - Contact Resistance: 30 Milliohms Max - Insulation Resistance: 1000 Mega Ohms Min - Dielectric Voltage: 500V AC one sec level - Operating Temperature: -25 „ƒ - 85 „ƒ- Suitable for Computer Memory, Power transfer, Communications Power System, PC Application, Armamentarium, Motherboard Code PP33 Available Price €1.19
Battery holder 2x AA Battery holder with switch Includes a switch to output the voltage built into the case itself. It has a cover to protect the batteries. The cover has perforation in case you want to secure it with a screw (not included). Battery holder 2x AA Battery holder with switch features: - Cable 15cm long - Measurements 68x 32x 18mm - Battery length max 50mm - Compatible batteries (LR06, R06, MN1500, AM3, UM3 , HP7) Code PP005 Available Price €1.39
Battery Compartment 9V 6LF22 Power cable Battery Compartment 9V 6LF22 Power cable features: - Cable 17cm long- DC connector 5.5 / 2.5mm- Dimensions 54x 30x 20mm- Batteries 6LR61, 6LF22, X22 or compatible- It has 3 holes for anchoring to plate or chassis Code PP010 Available Price €1.19
Battery holder 4x AAA 6V Characteristic: - Cable 13cm long - Measurements 49x 52x 13mm - Battery length max 44mm - Compatible batteries (LR03, 24A, R03, RX03, MN2400, AM4, UM4) Code PP001 Available Price €1.19
Battery holder 2x CR2032 Switch Characteristic: - Button cell battery - For 20mm diameter battery type CR2032 - ON / OFF switch - Dimension: 50mm (L) x 23mm (W) x 6mm (D) Code PP23 Backorder Price €1.19
4x 18650 3.7V Parallel Lithium Battery 4x 18650 3.7V Parallel Lithium Battery features: - Cable 10cm long - Measures 80x76x 20mm - Stack length max 67mm Code PP017 Available Price €2.89
4x AA battery holder 4-battery holder with 6V switch Includes a switch to output the voltage built into the case itself. It has a cover for protect the batteries. The cover has perforation in case you want to secure it with a screw (not included). Characteristic: - Cable 12cm long - Measures 70x 65x 18mm - Battery length max 50mm - Compatible batteries (LR06, R06, MN1500, AM3, UM3, HP7) Code PP006 Available Price €1.99
Battery holder 1x 18650 PCB mount 18650 battery base for soldering to PCB. Characteristic: - Measurements 78x 20x 21mm - Weight: 10 gr. ( approx.) - Stack length max 67mm Code PP053 Available Price €1.99