Components and sensors

Arduino Raspberry Remote Control HX1838 Infrared Emitter

NEC IR Remote Control Infrared emitter HX1838 features:

- 21 keys
- Measurements 85x 40x 5mm
- Includes battery
Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards:
Send / Receive information via IR
- Wiring of the IR Remote control + Infrared IR Receiver VS1838 with UNO module
- Lighting a red 3mm LED by Infrared
Realization of a manageable Infrared robot
- Wiring the IR Distance remote control + Infrared IR Receiver VS1838 with the UNO module
- Fix the IR Distance remote control + VS1838 Infrared IR Receiver in a Mini 2WD DIY Car Robot Kit

LED Diode Assortment Kit 50x Red Green Yellow Blue White features:
  
- Lens color: Red, green, yellow, blue - diffuse, light white
- Size: 5 mm
- Operating current: 20mA
- Voltage (red) 1.8V-2.3V
- Voltage (green) 3.2V-3.4V
- Voltage (yellow) 1.8V-2.3V
- Voltage (blue) 3.0V-3.2V
- Voltage (white) 3.2V - 3.4V
- Anode (A): Positive (long leg): 17mm
- Cathode (K): Negative (shorter leg): 15 mm
- Operating temperature: -25ºC / 80ºC
- Welding temperature: + 260ºC
- Quantity: - 50 units
                  - 10x red
                  - 10x green
                  - 10x yellow
                  - 10x blue
                  - 10x white

IR Remote Control + IR Infrared Receiver VS1838 features:
- The test distance is about 5-8 meters, but practical application depends on environmental factors (such as diaphragm, glass , obstructions or other material blockage) - The CHQ1838 / HX1838 receiver receives the 38kHz signal
- Vcc supply: 3.3V-5V
- IN digital output to connect to the port Arduino I / O
- Remote measurements 85x 40x 5mm
- Includes battery
Useful links for Arduino / Raspberry programming and projects with Arduino boards / Raspberry:
Send / Receive information via IR
- Wiring of the IR Remote control + Infrared IR Receiver VS1838 with the UNO module
- Light a 3mm red LED by Infrared

RGB LED Strip WS2812B Black 1m 30 LED/M IP65 features:
- RGB LED WS2812B
- WS2812B are LEDs that have integrated logic, making it possible to vary the color of each LED in a way individual
- WS2812B includes a built-in inside each LED, which allows each pixel to be accessed individually
- For this reason, these types of LEDs are called individually indexable.
- They are based on the 5050 LEDs
- 30 individually indexable LED diodes
- 24-bit color control (8-bit PWM per channel)
- 16.8 million colors per LED
- Communication One-wire
- Power: 5 V
- Width: 11 mm
- Thickness: 2.6 mm
- Length: 1 meter
- Consumption: 1.8A (all white)
- Waterproof
- With 3M adhesive

Wireless Remote Control + 4 Channel Receiver features:

Remote Control:
- Operating voltage: DC12V (battery included)
- Operating current: 10mA @>

Red Laser Module 650nm 5mW Head Point Adjustable Focal Length features:
- Type: red laser diode
- Laser type: point
- Adjustable Focus
- Wavelength: 650nm
- Output power: 5mW
- Operating voltage: 4.5-5V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130mm

The decode card with 5V amplifier is applied with the speaker directly. It has a support feeding memory. Mini USB TF Card MP3 Player Decoder with IR Remote Control Player features:
- Power supply: 5 VDC
- FAT16 support, FAT32 file system
- Compatible with MP1 Layer3, MP2 Layer3, MP3 Layer3 version of the song
- Can read the U disk, MP3 songs from the TF card
- "TF" Jack: Connecting the MP3 song with SD or MMC card can play automatically
- "USB": U disk Jack, connect MP3 songs with U disk can play automatically
- "Play / Pause": on the USB / SD short press to play / Pause
- Support for Bluetooth, you need to buy a USB Bluetooth device to support the use
- Two-channel audio output, suitable for car and amplifier in the installation

Red Laser Cross Module 650nm 5mW Head Point Adjustable Focal Length features:
- Type: red laser diode
- Type of laser: cross
- Adjustable Focus
- Wavelength: 650nm
- Output power: 5mW
- Operating voltage: 4.5-5V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130mm

The four-way wireless smart receiving controller features four relays, which can control on / off as a switch for various special control applications. The product has the characteristics of stable performance, small size and high reception sensitivity. It is mainly used in electric doors, windows, lifting equipment, security and control systems etc. The controller supports a variety of different wireless remote controllers, such as 2262/2260/1527/2240.

Ideal for projects with ARDUINO, PIC, AVR, Raspberry
The infrared receiver receives the signal of 38kHz for remote control

MT12 2.4G Air Mouse wireless controller Remote control with Fidelity voice input, IR Learning and 6-axis gyroscope for PC, Android TV Box, laptop and projector. Ideal for quick operation by voice or movement. Move the mouse as if it were a Wii Remote.

1N4007 Rectifier Diodes 1A 1000V DO-41 features:
- Standard rectifier diode
- Configuration: Simple
- Reverse voltage: 1000V
- Direct voltage drop: 1V
- Direct direct current: 1A
- Maximum overvoltage current: 30A
- Encapsulated: DO-41
- Operational tension: -65ºC to + 125ºC
- Quantity: 30 units

5x Power LED Aluminum Heat Sink 1W 3W features:
- Outside diameter: 36mm
- Height: 15mm
- Quantity: 5 units

The Sonoff IFan03 is an intelligent controller for ceiling fans with light that allows us to control it intelligently, either by the eWeLink application, by means of 433MHz RF control or by voice assistants such as Alexa or Google Home.

Create your own scenes, turn on the light and/or the fan and adjust its speed, programming it to the hours you want.

3x Power LED Aluminum Heat Sink 3W 5W features:
- Outside diameter: 36mm
- Height: 30mm
- Quantity: 3 units

Stylish and modern Sonoff RM433 remote control base used to control your Sonoff devices in the most convenient way. (Comes without remote control)

Easily dome your home with Sonoff

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet.
The advantages of LED COB:
- A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without needing to concentrate so much the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light
Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

QWERTY mini keyboard with multimedia control keys and PC games control keys, mini touchpad for mouse control. Perfect for PC, laptop, Raspberry Pi, MacOS, Xbox 360, Xbox One, PS3, PS4, Android smartphones, TV Box, HTPC, IPTV, etc.

Set of 300 diodes packed in a handy box. Lens colour: red, green, yellow, yellow, blue - diffuse, light white.

With this Mini TV BOX you will have a complete multimedia centre on your TV thanks to its Android 9.0 and its powerful CPU. It supports H.265 hardware video decoding, external SD card and USB hard drive drivers. 

Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them.
Characteristic:
- Chip 28x47mil
- Voltage: 3.0-3.2V
- Current: 300mA - Luminous flux: 120-130LM
- Beam angle: 130 degrees

With this Mini TV BOX you will have a complete multimedia centre on your TV thanks to its Android 9.0 and its powerful CPU. It supports H.265 hardware video decoding, external SD card and USB hard drive drivers.

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip
- Voltage: 2.2-2.4V
- Current: 300mA
- Luminous flux: 40-50LM
- Ã beam angle: 120 degrees
- Color emission: red

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip
- Voltage: 2.2-2.4V
- Current: 300mA
- Luminous flux: 40-50LM
- Ã Beam angle: 120 degrees
- Color emission: yellow / orange

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 30mil chip
- Voltage: 3.0-3.2V
- Current: 300mA
- Luminous flux: 70-80LM
- Ã beam angle: 120 degrees
- Color emission: green

Led IR 3mm is a pair of infrared LED's consisting of a photodiode (Emitter) that emits an infrared light when polarised through its working voltage ranges and a phototransistor (Receiver) that allows to capture the infrared light emitted by the photodiode.

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil
- Voltage: 3.0-3.2V
- Current: 300mA
- Luminous flux: 20-30LM
- Ã beam angle: 120 degrees
- Color emission: blue

WS2812B RGB LED Strip White 1m 30 LED/M IP65 features:
- IP65 RGB Addressable Smart Arduino
- RGB LED WS2812B
S2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually
S2812B includes a built-in inside each LED, which allows each pixel to be accessed individually
- For this reason, these types of LEDs are called individually indexable
- They are based on the 5050 LED
- 30 individually indexable LED diodes
- 24-bit color control (8-bit PWM per channel)
- 16.8 million colors by LED
- One-wire communication
- Power: 5 V
idth: 11 mm
- Thickness: 2.6 mm
- Length: 1 meter
- Consumption: 1.8A (all white)
ater resistant

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)
- the light intensity is greater without the need to concentrate the beam of light
- greater durability
- opening angle of up to 160ºC
- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer.
Place a little thermal silicone in each of the diode placement centers.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone-coated tablet
The advantages of LED COB:
- A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Opening angle of up to 160º

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without needing to concentrate so much the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light - Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little thermal silicone in each of the placement centers of the diodes
- The thermal paste increases the thermal transfer between the diode and the metal plate used as circuit

3x LED Base Plate Heat Sink 1W 3W 5W features:
- Outside diameter: 20mm
- Quantity: 3 units

LED Diode Assortment Kit 30 pcs 5mm red, green, yellow features:
- Lens color: red, green, yellow - diffuse
- Size: 5mm
- Operating current: 20mA
- Voltage (red) 1,8V-2,3V
- Voltage (green) 3,2V-3,4V
- Voltage (yellow) 1,8V-2,3V
- Anode (A): Positive (long leg): 28mm
- Catode (K): Negative (short leg): 25mm
- Operating temperature: -25ºC/80ºC
- Welding temperature: +260ºC
- Quantity: 30 units
*10x red
*10x green
*10x yellow

LED Diode Assortment Kit 40x Red Green Yellow Blue features:
  
- Lens color: Red, green, yellow, blue -difused
- Size: 5 mm
- Operating current: 20mA
- Voltage (red) 1.8V-2.3V
- Voltage (green) 3.2V-3.4V
- Voltage (yellow) 1.8V-2.3V
- Voltage (blue) 3.2V-3.4V
- Anode (A): Positive (long leg): 28mm
- Cathode (K): Negative (shorter leg): 25 mm
- Operating temperature: -25ºC/80ºC
- Welding temperature: + 260ºC
- Quantity: 40 units
      - 10x red
      - 10x green
      - 10x yellow
      - 10x blue

Red Laser Line Module Generator 650nm 5mW features:
- Type: red laser diode
- Type of laser: line
- Adjustable Focus
- Wavelength: 650nm
- Output power: 5mW
- Operating voltage: 4.5-5V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130 mm

20x Zener Diode BZX55C5V6 5.6V 500mW DO-35 0.5W 5V6 features:
-Zerner voltage: 5.6V
-Tolerance: 5%
-Power dissipated: 500mW
-Enter Zener: 25 Ohm
-Configuration: Simple
-Encapsulated: DO-35
-Temperature of work: -65C to 175C
-Quantity: 20 units

Low Signal High Speed ​​Switching.
These diodes are widely used to multiplex signals, such as buttons or digital inputs Characteristic:
- Reverse voltage: 100V,
- Forward voltage drop: 1V to 10mA,
- Forward direct current: 200mA,
- Maximum overvoltage current: 4A,
- Dissipated power: 500mW,
- Recovery time: 4ns,
- Configuration: Simple,
- Package: DO-35,
- Quantity: 30 units .

10x Rectifier Diode 1N5408 3A 1000V features:
- Reverse voltage: 1000V
- Direct voltage drop: 1.2V
- Direct direct current: 3A
- Configuration: Simple
- Encapsulated: DO-201AD
- Quantity: 5 units

LED 5mm RGB 4 Pins cathode commun with clear water lens.

LED 5mm RGB 4 Pin anode commun with clear water lens.

Red Laser Cross Line Point Module Generator 650nm 50mW features:
- Type: red laser diode
- Laser type: line, cross, point
- Adjustable Focus
- Wavelength: 650nm
- Output power: 50mW
- Operating voltage: 4.5-5V
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x45mm
- Cable length: 130mm

The aluminium heatsink for 3W to 5W LEDs. It is 10cm long, 2.5cm wide, 1.0cm high.