ADXL345 3-Axis Accelerometer SPI and I2C Ideal for projects with ARDUINO.You can use it with PIC, AVR, STM32.It serves to measure the static acceleration, for example gravity, in applications where you need to measure the inclination.Also to measure dynamic acceleration, movement. ADXL345 3-Axis Accelerometer SPI and I2C features: - Type: 3-axis accelerometer- Chip: ADXL345- Supply voltage: 3-5V- Consumption: 40uA active and 0.1uA on hold- Communication: SPI and I2C- Measurements: Static and dynamic acceleration- Accelerometer scales ± 2g, ± 4g, ± 8g and ± 16g- Resolution: 13 bits- Dimensions: 20x16mm- Operating temperature: -40 °C to +80 °C- Detection: Free fall, click-double click Code M0018 Available Price €2.55
Sensor SCT-013-050, Non-Invasive 50A AC Current Meter The sensor measures the current flowing in the cable without cutting it. The measurement is made on a single insulated wire, the output is an analog voltage from 0 to 1 V. Sensor SCT-013-050, Non-Invasive 50A AC Current Meter Code M0220 Available Price €5.74
Mini Submersible Water Pump DC 12V 200L/h 3W for ARDUINO Mini Submersible Water Pump DC 5.5-12V 200L / H 3W Mini Submersible Water Pump DC 12V 200L/h 3W ARDUINO features: * Operating voltage: 5.5-12V * Max flow: max. 200 l / h * Maximum pumping height: 40cm- max. 150cm * Cable length: 140cm * Jack DC 5.5x2.1mm connector (ext / int) * Outlet diameter: 8 mm * Dimensions: 36mm x 25mm Code M0111 Available Price €8.22
Resistor 10M Ohm 5% 0,25W 1/4W Resistor 10M Ohm 5% 0,25W 1/4W features:-10M Ohm-Type: Carbon film-Tolerance: ±5%-Power: 0.25W-Dimensions: 2x7mm Code D0034 Available Price €0.07
Battery Holder 6x AA with DC Connector 9V LR06 Ideal to power your Arduino board.Battery Holder 6x AA with DC Connector 9V LR06 features:- Cable 12cm long,- Measures 90x 55x 15mm,- Max 50mm pile length,- Compatible batteries (LR06, R06, MN1500, AM3, UM3, HP7). Code PP008 Available Price €1.53
Capsule Electret Condenser Microphones 9.5mm MIC Capsule Electret Condenser Microphones 9.5 MIC features: - Measures: 9.7 x 6.7mm- Impedance: 1.5kΩ- Working current: 0.5mA- Working voltage: 4.5V (1.5-10V)- Bandwidth: 50 ... 16000Hz- Signal to noise ratio: ‰¥58dB- Sensitivity: -42 ± 3dB- Sensitivity tolerance: ± 3dB- Distance between terminals: 2.54mm Code M0020 Available Price €0.65
10x white LED 5mm short Characteristic:- Lens color: white,- Diameter of the bulb: 5 mm,- Operating current: 20mA,- Voltage: 2.0V-2.2V,- Wavelength: 588-590 nm,- Anode (A): Positive (long leg): 19mm,- Cathode (K): Negative (shorter leg): 17 mm,- Operating temperature: -25ºC / 80ºC,- Welding temperature: + 260ºC,- Quantity: 10 units. Code P0141 Available Price €0.17
NFC RFID Keychain Tag 13.56 MHz NFC RFID Keychain Tag 13.56 MHz features: - 32 bit unique code - Protocol: ISO14443 - Compatible with NFC Mifare 1k - Memory: 1kB EEPROM - Operating frequency: 13.56MHZ - Communication speed: 106Kboud - Reading distance: 2.5-10CM - Reading time: 1-2MS - Working temperature: -20ºC to 85ºC - Number of uses 100,000 times - Data retention: 10 years - Material: ABS - Dimensions 40.5 x 32 x 4.2 mm Code M0030 Available Price €0.82
i8 Bluetooth QWERTY mini keyboard battery powered touchpad for PC, TV QWERTY mini keyboard with multimedia control keys and PC games control keys, mini touchpad for mouse control. Perfect for PC, laptop, Raspberry Pi, MacOS, Xbox 360, Xbox One, PS3, PS4, Android smartphones, TV Box, HTPC, IPTV, etc. Code RA120 Available Price €8.09
Pair of infrared LEDs 3mm Receiver Transmitter Led IR 3mm is a pair of infrared LED's consisting of a photodiode (Emitter) that emits an infrared light when polarised through its working voltage ranges and a phototransistor (Receiver) that allows to capture the infrared light emitted by the photodiode. Code S155 Last items in stock Price €0.57
IR Remote Control + IR Infrared Receiver VS1838 IR Remote Control + IR Infrared Receiver VS1838 features: - The test distance is about 5-8 meters, but practical application depends on environmental factors (such as diaphragm, glass , obstructions or other material blockage) - The CHQ1838 / HX1838 receiver receives the 38kHz signal - Vcc supply: 3.3V-5V - IN digital output to connect to the port Arduino I / O - Remote measurements 85x 40x 5mm - Includes battery Useful links for Arduino / Raspberry programming and projects with Arduino boards / Raspberry: Send / Receive information via IR - Wiring of the IR Remote control + Infrared IR Receiver VS1838 with the UNO module - Light a 3mm red LED by Infrared Code W0021 Available Price €2.06
Wireless Remote Control + 4 Channel Receiver Wireless Remote Control + 4 Channel Receiver features: Remote Control: - Operating voltage: DC12V (battery included)- Operating current: 10mA @> Code W0001 Available Price €4.09
DC 12V 4 Chanel RF Wireless Remote Control Switch System The four-way wireless smart receiving controller features four relays, which can control on / off as a switch for various special control applications. The product has the characteristics of stable performance, small size and high reception sensitivity. It is mainly used in electric doors, windows, lifting equipment, security and control systems etc. The controller supports a variety of different wireless remote controllers, such as 2262/2260/1527/2240. Code W0101 Available Price €10.54
Mini USB TF Card MP3 Player Decoder with IR Remote Control Player The decode card with 5V amplifier is applied with the speaker directly. It has a support feeding memory. Mini USB TF Card MP3 Player Decoder with IR Remote Control Player features: - Power supply: 5 VDC- FAT16 support, FAT32 file system- Compatible with MP1 Layer3, MP2 Layer3, MP3 Layer3 version of the song- Can read the U disk, MP3 songs from the TF card- "TF" Jack: Connecting the MP3 song with SD or MMC card can play automatically- "USB": U disk Jack, connect MP3 songs with U disk can play automatically- "Play / Pause": on the USB / SD short press to play / Pause- Support for Bluetooth, you need to buy a USB Bluetooth device to support the use- Two-channel audio output, suitable for car and amplifier in the installation Code W0086 Available Price €4.95
SONOFF RM433 Remote Controller Base Stylish and modern Sonoff RM433 remote control base used to control your Sonoff devices in the most convenient way. (Comes without remote control) Easily dome your home with Sonoff Code WS038 Available Regular price €2.06 -€0.59 Price €1.47
Android Smart TV Box X96 Mini - Android 9.0, 2GB + 16GB With this Mini TV BOX you will have a complete multimedia centre on your TV thanks to its Android 9.0 and its powerful CPU. It supports H.265 hardware video decoding, external SD card and USB hard drive drivers. Code RA121 ✗ Out-of-Stock Price €26.40
SONOFF RM433 Remote Controller The Sonoff IFan03 is an intelligent controller for ceiling fans with light that allows us to control it intelligently, either by the eWeLink application, by means of 433MHz RF control or by voice assistants such as Alexa or Google Home. Create your own scenes, turn on the light and/or the fan and adjust its speed, programming it to the hours you want. Code WS037 Available Price €5.78
Android Smart TV Box X96 Mini - Android 9.0, 1GB + 8GB With this Mini TV BOX you will have a complete multimedia centre on your TV thanks to its Android 9.0 and its powerful CPU. It supports H.265 hardware video decoding, external SD card and USB hard drive drivers. Code RA122 ✗ Out-of-Stock Price €24.79
i8 Bluetooth QWERTY mini keyboard battery powered touchpad for PC, TV QWERTY mini keyboard with multimedia control keys and PC games control keys, mini touchpad for mouse control. Perfect for PC, laptop, Raspberry Pi, MacOS, Xbox 360, Xbox One, PS3, PS4, Android smartphones, TV Box, HTPC, IPTV, etc. Code RA120 Available Price €8.09
Pair of infrared LEDs 3mm Receiver Transmitter Led IR 3mm is a pair of infrared LED's consisting of a photodiode (Emitter) that emits an infrared light when polarised through its working voltage ranges and a phototransistor (Receiver) that allows to capture the infrared light emitted by the photodiode. Code S155 Last items in stock Price €0.57
IR Remote Control + IR Infrared Receiver VS1838 IR Remote Control + IR Infrared Receiver VS1838 features: - The test distance is about 5-8 meters, but practical application depends on environmental factors (such as diaphragm, glass , obstructions or other material blockage) - The CHQ1838 / HX1838 receiver receives the 38kHz signal - Vcc supply: 3.3V-5V - IN digital output to connect to the port Arduino I / O - Remote measurements 85x 40x 5mm - Includes battery Useful links for Arduino / Raspberry programming and projects with Arduino boards / Raspberry: Send / Receive information via IR - Wiring of the IR Remote control + Infrared IR Receiver VS1838 with the UNO module - Light a 3mm red LED by Infrared Code W0021 Available Price €2.06
Wireless Remote Control + 4 Channel Receiver Wireless Remote Control + 4 Channel Receiver features: Remote Control: - Operating voltage: DC12V (battery included)- Operating current: 10mA @> Code W0001 Available Price €4.09
DC 12V 4 Chanel RF Wireless Remote Control Switch System The four-way wireless smart receiving controller features four relays, which can control on / off as a switch for various special control applications. The product has the characteristics of stable performance, small size and high reception sensitivity. It is mainly used in electric doors, windows, lifting equipment, security and control systems etc. The controller supports a variety of different wireless remote controllers, such as 2262/2260/1527/2240. Code W0101 Available Price €10.54
Mini USB TF Card MP3 Player Decoder with IR Remote Control Player The decode card with 5V amplifier is applied with the speaker directly. It has a support feeding memory. Mini USB TF Card MP3 Player Decoder with IR Remote Control Player features: - Power supply: 5 VDC- FAT16 support, FAT32 file system- Compatible with MP1 Layer3, MP2 Layer3, MP3 Layer3 version of the song- Can read the U disk, MP3 songs from the TF card- "TF" Jack: Connecting the MP3 song with SD or MMC card can play automatically- "USB": U disk Jack, connect MP3 songs with U disk can play automatically- "Play / Pause": on the USB / SD short press to play / Pause- Support for Bluetooth, you need to buy a USB Bluetooth device to support the use- Two-channel audio output, suitable for car and amplifier in the installation Code W0086 Available Price €4.95
SONOFF RM433 Remote Controller Base Stylish and modern Sonoff RM433 remote control base used to control your Sonoff devices in the most convenient way. (Comes without remote control) Easily dome your home with Sonoff Code WS038 Available Regular price €2.06 -€0.59 Price €1.47
Android Smart TV Box X96 Mini - Android 9.0, 2GB + 16GB With this Mini TV BOX you will have a complete multimedia centre on your TV thanks to its Android 9.0 and its powerful CPU. It supports H.265 hardware video decoding, external SD card and USB hard drive drivers. Code RA121 ✗ Out-of-Stock Price €26.40
SONOFF RM433 Remote Controller The Sonoff IFan03 is an intelligent controller for ceiling fans with light that allows us to control it intelligently, either by the eWeLink application, by means of 433MHz RF control or by voice assistants such as Alexa or Google Home. Create your own scenes, turn on the light and/or the fan and adjust its speed, programming it to the hours you want. Code WS037 Available Price €5.78
Android Smart TV Box X96 Mini - Android 9.0, 1GB + 8GB With this Mini TV BOX you will have a complete multimedia centre on your TV thanks to its Android 9.0 and its powerful CPU. It supports H.265 hardware video decoding, external SD card and USB hard drive drivers. Code RA122 ✗ Out-of-Stock Price €24.79