Components and sensors

LED Diode Assortment Kit 50x Red Green Yellow Blue White features:
  
- Lens color: Red, green, yellow, blue - diffuse, light white
- Size: 5 mm
- Operating current: 20mA
- Voltage (red) 1.8V-2.3V
- Voltage (green) 3.2V-3.4V
- Voltage (yellow) 1.8V-2.3V
- Voltage (blue) 3.0V-3.2V
- Voltage (white) 3.2V - 3.4V
- Anode (A): Positive (long leg): 17mm
- Cathode (K): Negative (shorter leg): 15 mm
- Operating temperature: -25ºC / 80ºC
- Welding temperature: + 260ºC
- Quantity: - 50 units
                  - 10x red
                  - 10x green
                  - 10x yellow
                  - 10x blue
                  - 10x white

Microcontroller ATMEGA328P-PU DIP-28 features:
- Series: AVR® ATmega
- Core Processor: AVR
- Package / Case: 28-DIP (0.300 ", 7.62mm)
- Core Size: 8-Bit
- Speed: 20MHz
- Connectivity: I²C, SPI, UART / USART
- Peripherals Brown-out: Detect / Reset, POR, PWM, WDT
- Number of I/O: 23
- Program Memory Size: 32KB (16K x 16)
- Program Memory Type: FLASH
- EEPROM Size: 1K x 8
- RAM Size: 2K x 8
- Voltage - Supply (Vcc / Vdd): 1.8 V ~ 5.5 V
- Data Converters: A / D 6x10b
- Oscillator Type: Internal
- Operating Temperature: -40 ° C ~ 85 ° CFManufacturer: SGS-THOMSON / ST
- RoHS: Yes
- Quantity: 1 unit

RGB LED Strip WS2812B Black 1m 30 LED/M IP65 features:
- RGB LED WS2812B
- WS2812B are LEDs that have integrated logic, making it possible to vary the color of each LED in a way individual
- WS2812B includes a built-in inside each LED, which allows each pixel to be accessed individually
- For this reason, these types of LEDs are called individually indexable.
- They are based on the 5050 LEDs
- 30 individually indexable LED diodes
- 24-bit color control (8-bit PWM per channel)
- 16.8 million colors per LED
- Communication One-wire
- Power: 5 V
- Width: 11 mm
- Thickness: 2.6 mm
- Length: 1 meter
- Consumption: 1.8A (all white)
- Waterproof
- With 3M adhesive

Original Atmel DIP-8 ATtiny85-20PU Tiny85-20PU Microcontroller IC features:
- Series: low power AVR®
- Core Processor: AVR
- Package / Case: 8-DIP
- Core Size: 8-Bit
- Speed: 20MHz
- Connectivity: SPI
- Number of I / O: 6
- Program MemorySize: 8KB
- Program MemoryType: FLASH
- EEPROM Size: 512B
- Voltage - Supply (Vcc / Vdd): 2.7V ~ 5.5 V
- Data Converters: 10bit A / D, 4 chanels
- Oscillator Type: External
- Operating Temperature: -40 ° C ~ 85 ° C
- RoHS: Yes
- Quantity: 1 unit

Red Laser Module 650nm 5mW Head Point Adjustable Focal Length features:
- Type: red laser diode
- Laser type: point
- Adjustable Focus
- Wavelength: 650nm
- Output power: 5mW
- Operating voltage: 4.5-5V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130mm

With this multiplexer circuit we will be able to get 8 more digital outputs for arduino losing only 3 of them. 

Red Laser Cross Module 650nm 5mW Head Point Adjustable Focal Length features:
- Type: red laser diode
- Type of laser: cross
- Adjustable Focus
- Wavelength: 650nm
- Output power: 5mW
- Operating voltage: 4.5-5V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130mm

Sensor used to measure the temperature of the hotend or hot bed of your 3D printer
Characteristic:
- NTC Thermistor 100 K 3950
- Impedance: 100 K (25º of Temperature)
- Accuracy: 1%
- Sensor Diameter: 1.8 mm
- Cable Length: 1 m
- Cable: AWM UL 3398 150 ° C 300V
- Ready to be installed and used. Fully insulated
- Designed to withstand the high temperatures of extrusion of plastics such as PLA and ABS

- The PCF8574P is an 8-bit remote I / O expander for the I2C bus with 16-pin DIP packet interrupt. - Provides general-purpose remote I / O expansion via a two-wire, two-way I2C bus (Serial Clock (SCL), Serial Data (SDA)).
- Devices consist of eight quasi-directional ports , 100KHz I2C bus interface, three hardware address inputs and interrupt output operating between 2.5V and 6V.
- Quasi-bidirectional port can be independently assigned as one input to monitor interrupt status or keyboards or as an output to activate indicating devices like LEDs. - System Master can read from the input port or write to the output port through a single register.

L293D Quadruple Half-H Drivers STM features:
-Continue 0.6A half-h driver STM Arduino

Product Category: Bipolar Transistor, NPN.
2N2222 NPN 40V 800mA 300MHz transistor features:

- Package / Case: TO-92
- Quantity: 20 units
- Collector-base voltage VCBO: 75V
- Collector-emitter voltage VCEO: 40V
- VEBO emitter-base voltage: 6V
- Continuous collector current: 600mA
- DC MAX collector current: 800mA
- Maximum power dissipation: 1.6W

1N4007 Rectifier Diodes 1A 1000V DO-41 features:
- Standard rectifier diode
- Configuration: Simple
- Reverse voltage: 1000V
- Direct voltage drop: 1V
- Direct direct current: 1A
- Maximum overvoltage current: 30A
- Encapsulated: DO-41
- Operational tension: -65ºC to + 125ºC

TDA2822M Dual DIP8 Stereo Audio Low Voltage Power Amplifier features:
- Package / Case: 8-DIP
- Voltage - Supply (Vs): 1.8V ~ 15V
- Quantity: 1 unit

5x Power LED Aluminum Heat Sink 1W 3W features:
- Outside diameter: 36mm
- Height: 15mm
- Quantity: 5 units

2x IRLZ44N N-Channel Mosfet Transistor TO-220 55V 47A features:
- Package / Case: TO-220
- Quantity: 2 units

3x Power LED Aluminum Heat Sink 3W 5W features:
- Outside diameter: 36mm
- Height: 30mm
- Quantity: 3 units

4N35 DIP Optocoupler 30V 60mA - features:
-NPN Phototransistor Optocoupler

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet.
The advantages of LED COB:
- A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without needing to concentrate so much the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light
Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

2x MOC3020 Optocoupler 400V features:
-Triac Driver Output Optoisolator
-Pack: DIL 6
-Electronic voltage forward: 1.15V
-Trigger LED current: 30mA
-Voltage isolation: 5,300 VAC RMS
-Maximum blocking voltage: 400V
-Temperature of operation: -40°C a + 85°C

Set of 300 diodes packed in a handy box. Lens colour: red, green, yellow, yellow, blue - diffuse, light white.

Mount LED Diode on a good heatsink, a metal plate, add some fan, this is necessary because you have to " remove "the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the centers of placement of the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them.
Characteristic:
- Chip 28x47mil
- Voltage: 3.0-3.2V
- Current: 300mA - Luminous flux: 120-130LM
- Beam angle: 130 degrees

2x LM317T Voltage Regulator DC-DC 1.2V - 37V 1.5A TO-220 features:
- Output type: adjustable
- Voltage Output: 1.2V to 37V
- Manufacturer: ST Microelectronics
- Current Output: 1.5A
- Input voltage Vi- Max Vo: 40V
- Operating temperature: 0ºC to + 125ºC
- Encapsulated: TO-220
- Polarity: Positive
- Quantity: 2 units

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip
- Voltage: 2.2-2.4V
- Current: 300mA
- Luminous flux: 40-50LM
- Ã beam angle: 120 degrees
- Color emission: red

Standard Triac BTA06-600B TO-220 6A 600V STM BTA06 features:
- Maximum G Door Trip Current: 100mA
- Repetitive Peak Reverse Voltage: 600V
- Nominal Suppression Current: 63A
- Maximum Door Trip Voltage: 1.5V

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 32mil Chip
- Voltage: 2.2-2.4V
- Current: 300mA
- Luminous flux: 40-50LM
- Ã Beam angle: 120 degrees
- Color emission: yellow / orange

L7812CV Voltage Regulator 12V 1.5A TO-220 7812 Arduino L7812CV features:
-Type Output: Fixed
-Voltage Output: 12V
-Manufacturer: ST Microelectronics
-Output current: 1.5A
-Max input voltage: 35V
-Input input min.: 5V
-Operational temperature: 0ºC to + 125ºC
-Encapsulated: TO-220
-Polarity: Positive

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - 30mil chip
- Voltage: 3.0-3.2V
- Current: 300mA
- Luminous flux: 70-80LM
- Ã beam angle: 120 degrees
- Color emission: green

2x LM1117T 3.3V 0.8A Voltage Regulator LDO DC TO-220 features:
- Type Output: fixed
- Voltage Output: 3.3V
- Manufacturer: Texas Ins
- Output Current: 800mA
- Max input voltage: 20V
- Operating temperature: 0ºC to + 125ºC
- Encapsulated: TO-220
- Polarity: Positive
- Quantity: 2 units

Mount LED Diode on a good heatsink, a metal plate, add a fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer to place a little bit of thermal silicone in each of the diode's placement centers.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.
Important to keep in mind the diodes generate a lot of light intensity and very concentrated.
Avoid looking directly at them once they are turned on and wear protective glasses when working with them. Characteristic: - Chip 28x47mil
- Voltage: 3.0-3.2V
- Current: 300mA
- Luminous flux: 20-30LM
- Ã beam angle: 120 degrees
- Color emission: blue

Voltage Regulator 2% 5V 1.5A TO-220 L7805ACV features:
- Output Type: Fixed
- Voltage Output: 5V
- Manufacturer: ST Microelectronics
- Current Output: 1.5A
- Max input voltage: 35V
- Input voltage min .: 5V
- Operating temperature: 0ºC to + 125ºC
- Encapsulated: TO-220
- Polarity: Positive
- 2% output voltage tolerance (A version)
- Quantity: 1 unit

WS2812B RGB LED Strip White 1m 30 LED/M IP65 features:
- IP65 RGB Addressable Smart Arduino
- RGB LED WS2812B
S2812B are LEDs that have integrated logic, so it is possible to vary the color of each LED individually
S2812B includes a built-in inside each LED, which allows each pixel to be accessed individually
- For this reason, these types of LEDs are called individually indexable
- They are based on the 5050 LED
- 30 individually indexable LED diodes
- 24-bit color control (8-bit PWM per channel)
- 16.8 million colors by LED
- One-wire communication
- Power: 5 V
idth: 11 mm
- Thickness: 2.6 mm
- Length: 1 meter
- Consumption: 1.8A (all white)
ater resistant

Microcontroller ATMEGA8A-PU ATMEGA8 DIP-28 Atmel features:
- Series: AVR® ATmega
- Core processor: AVR
- Package / box: 28-DIP (0.300 ", 7.62 mm)
- Core size: 8 bits
- Speed: 16MHz
- Connectivity: I²C, SPI, UART / USART
- I / O Number: 23
- Type of memory of the program: FLASH 8kB
- EEPROM size: 512B
- RAM size: 1kB
- Voltage - Supply (Vcc / Vdd): 2.7 V ~ 5.5 V
- Data converters: 10bit A / D
- Type of oscillator: internal
- Operating temperature: -40 ° C ~ 85 ° C
- RoHS: Yes
- Quantity: 1 unit

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - a light output of up to 120 lumens / watt (twice as much as LED SMD)
- the light intensity is greater without the need to concentrate the beam of light
- greater durability
- opening angle of up to 160ºC
- multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the board so that the LEDs last longer.
Place a little thermal silicone in each of the diode placement centers.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone-coated tablet
The advantages of LED COB:
- A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Opening angle of up to 160º

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.

Bridge Rectifier KBL10 - 4A/1000V features:
- Maximum reverse voltage: 1000 V
- Vf - Front tension: 1.0 V
- Max. Overvoltage current: 200 A
- Minimum operating temperature: - 50 C
- Maximum operating temperature: + 150 C
- Go - Reverse current: 10 uA
- Quantity: 1 unit

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A light output of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without concentrating the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little bit of thermal silicone in each of the placement centers. the diodes.
The thermal paste increases the thermal transfer between the diode and the metal plate used as a circuit.

5x Bridge Rectifier DB107 1A / 1000V DIP4 features:
- Maximum reverse voltage: 1000V
- Vf - Front tension: 1.0 V
- Max. Overvoltage current: 50A
- Minimum operating temperature: - 50 *C
- Maximum operating temperature: + 150 *C
- Quantity: 1 unit

COB LEDs are built as a matrix of LEDs, that is, a concentration of LEDs in a silicone coated tablet. The advantages of LED COB: - A luminous performance of up to 120 lumens / watt (twice as much as LED SMD)
- The light intensity is greater without needing to concentrate so much the beam of light
- Greater durability
- Angle of opening up to 160ºC
- Multidirectional light - Mount LED diode on a good heatsink, add some fan, this is necessary because you have to "remove" the heat from the surface of the plate so that the LEDs last longer to place a little thermal silicone in each of the placement centers of the diodes
- The thermal paste increases the thermal transfer between the diode and the metal plate used as circuit

5x Rectifier Bridge RB154 - 1.5A / 400V features:
- Maximum reverse voltage: 400 V
- Current Iav 25ºC - 1.5A
- Vf - Front tension: 1.0 V (1A)
- Max. Overvoltage current: 50 A
- Minimum operating temperature: - 50ºC
- Maximum operating temperature: + 150ºC
- Quantity: 5 units

3x LED Base Plate Heat Sink 1W 3W 5W features:
- Outside diameter: 20mm
- Quantity: 3 units

2x Bridge Rectifier GBU10M - 10A/1000V features:
- Maximum reverse voltage: 1000 V
- Vf - Front tension: 1.0 V
- Current If (av) - 10A (with heat sink)
- Max. Overvoltage current: 250 A
- Minimum operating temperature: - 50 C
- Maximum operating temperature: + 150 C
- Go - Reverse current: 5 uA
- Quantity: 2 units

2x Bridge Ractifier KBU8M - 8A/1000V KBU810 features:
- Maximum reverse voltage: 1000 V
- Vf - Front tension: 1.0 V
- Current If (av) - 8A
- Max. Overvoltage current: 300 A
- Minimum operating temperature: - 50 C
- Maximum operating temperature: + 150 C
- Go - Reverse current: 10 uA
- Quantity: 2 units

2x Bridge Rectifier KBU6M - 6A/1000V KBU610 features:
  - Maximum reverse voltage: 1000V
- Vf - Front tension: 1.0 V
- Current If (av) - 6A
- Max. Overvoltage current: 250 A
- Minimum operating temperature: - 50 C
- Maximum operating temperature: + 150 C
- Go - Reverse current: 10 uA
- Quantity: 2 units

3x Bridge Rectifier KBP210 - 2A/1000V features:
- Maximum reverse voltage: 1000 V
- Vf - Front tension: 1.1 V
- Current If (av) - 2A
- Max. Overvoltage current: 60 A
- Minimum operating temperature: - 50 C
- Maximum operating temperature: + 150 C
- Go - Reverse current: 10 uA
- Quantity: 3 units

Product Category: Bipolar Transistor, NPN.
BC547B NPN 50V 100mA transistor 0.1A TO-92 features:

- Package / Case: TO-92
- Quantity: 25 units
- Collector-base voltage VCBO: 50V
- Collector-emitter voltage VCEO: 45V
- VEBO emitter-base voltage: 6V
- Continuous collector current: 100mA
- DC MAX collector current: 200mA
- Maximum power dissipation: 500mW

L7805CV Voltage Regulator 5V 1.5A TO-220 features:
-Type Output: Fixed
-Voltage Output: 5V
-Manufacturer: ST Microelectronics
-Output current: 1.5A
-Max input voltage: 35V
-Input input min.: 5V
-Operational temperature: 0ºC to + 125ºC
-Encapsulated: TO-220
-Polarity: Positive

LED Diode Assortment Kit 30 pcs 5mm red, green, yellow features:
- Lens color: red, green, yellow - diffuse
- Size: 5mm
- Operating current: 20mA
- Voltage (red) 1,8V-2,3V
- Voltage (green) 3,2V-3,4V
- Voltage (yellow) 1,8V-2,3V
- Anode (A): Positive (long leg): 28mm
- Catode (K): Negative (short leg): 25mm
- Operating temperature: -25ºC/80ºC
- Welding temperature: +260ºC
- Quantity: 30 units
*10x red
*10x green
*10x yellow

Product Category: Bipolar Transistor, PNP
BC557B 50V PNP Transistor 100mA 0.1A TO-92 features:

- Package / Case: TO-92
- Quantity: 25 units
- Collector-base voltage VCBO: 50V
- Collector-emitter voltage VCEO: 45V
- VEBO emitter-base voltage: 6V
- Continuous collector current: 100mA
- DC MAX collector current: 200mA
- Maximum power dissipation: 500mW

LED Diode Assortment Kit 40x Red Green Yellow Blue features:
  
- Lens color: Red, green, yellow, blue -difused
- Size: 5 mm
- Operating current: 20mA
- Voltage (red) 1.8V-2.3V
- Voltage (green) 3.2V-3.4V
- Voltage (yellow) 1.8V-2.3V
- Voltage (blue) 3.2V-3.4V
- Anode (A): Positive (long leg): 28mm
- Cathode (K): Negative (shorter leg): 25 mm
- Operating temperature: -25ºC/80ºC
- Welding temperature: + 260ºC
- Quantity: 40 units
      - 10x red
      - 10x green
      - 10x yellow
      - 10x blue

Manufacturer: Taiwan Semiconductor 5x Voltage Regulator LDO 3.3V DC SOT223 SMD LM1117 TS1117BCW-3.3 features:
- Type Output: fixed
- Voltage Output: 3.3 V
- Output Current: 800mA
- Max input voltage: 12V
- Operating temperature: -20C to + 85ºC
- Encapsulated: SOT223
- Dropout Voltage Vdo: 1.3V (1A)
- Quantity: 5 units

Red Laser Line Module Generator 650nm 5mW features:
- Type: red laser diode
- Type of laser: line
- Adjustable Focus
- Wavelength: 650nm
- Output power: 5mW
- Operating voltage: 4.5-5V
- Operating intensity: <40mA
- Operating temperature: -30ºC to 60ºC
- Dimensions of the emitter: Φ12x35mm
- Cable length: 130 mm

2x CD4056BE 7 Segment BCD Decoder Integrated CD 4056 DIP features:
- Product: LCD CMOS controllers
- Number of segments: segment 4: 7
- Maximum clock frequency: 8 MHz
- Operating supply voltage: 3V to 18V
- Minimum operating temperature: - 55 C
- Maximum operating temperature: + 125 C
- Package / box: PDIP-16 - Mounting style: Through Hole
- Operating temperature range: - 55 C to + 125 C
- Pd - Dissipation power: 500 mW
- Supply current - Max: 300 uA
- Quantity: 2 units