2x LM1117T 3.3V 0.8A Voltage Regulator LDO DC TO-220
  • 2x LM1117T 3.3V 0.8A Voltage Regulator LDO DC TO-220
  • 2x LM1117T 3.3V 0.8A Voltage Regulator LDO DC TO-220

2x LM1117T 3.3V 0.8A Voltage Regulator LDO DC TO-220

T0012

2x LM1117T 3.3V 0.8A Voltage Regulator LDO DC TO-220 features:
- Type Output: fixed
- Voltage Output: 3.3V
- Manufacturer: Texas Ins
- Output Current: 800mA
- Max input voltage: 20V
- Operating temperature: 0ºC to + 125ºC
- Encapsulated: TO-220
- Polarity: Positive
- Quantity: 2 units

Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

2x LM1117T 3.3V 0.8A Voltage Regulator LDO DC TO-220 features:


- Type Output: fixed
- Voltage Output: 3.3V
- Manufacturer: Texas Ins
- Output Current: 800mA
- Max input voltage: 20V
- Operating temperature: 0ºC to + 125ºC
- Encapsulated: TO-220
- Polarity: Positive
- Quantity: 2 units

Data sheet

Voltaje de entrada
1,5 A
Voltaje de salida
Fijo
Empaquetado
TO-220

Customers who bought this product also bought

TP4056 Module Lithium Battery Charger with Protection Micro USB

TP4056 Module Lithium Battery Charger with Protection features:
- TP4056 Li-Ion Micro USB Charger
- Upgraded version of previous TP4056
- Micro USB connection to charge directly from the PC
- Ideal for 18650 batteries
- Based on the TC4056A regulator
- Input Voltage: 4.5V - 5.5V DC
- Full charge voltage: 4.2V +/- 1.5%
- Max Output Current: 1A
- Overvoltage protection 4.2V
- Over discharge protection 2.4V
- LED indicator: charging blue, charging red
- Operating temperature: -10ºC to + 85ºC
- IN + and IN- connection for electronic circuits
- Overcurrent protection: 3A
- Measurements 26 x 19 x 5 mm
- Possibility of current change through Rprog

A0026

Price €1.40

Hall Effect Sensor Module KY-003 with SH3144E TO-92

This module adapted for the arduino is a unipolar Ic Hall effect magnetic sensor. The Hall effect is when a current passes through a bar of semiconductor (or conductive) material, and if an induction magnetic field B is applied perpendicular to the direction of current flow, a voltage, called Hall voltage, proportional to the magnetic field, and the current appears on the faces sides of the bar. This tension is proportional to the displacement speed of the charge carriers, which is considerably higher in semiconductor materials than in metal conductors. Hall Effect Sensor Module KY-003 with SH3144E TO-92 features:
- 3-pin connector: 1- GND
2- VCC
3- Voltage is recovered depending on the magnetic effect
- Supply voltage: 5VDC
- Output current: 40mA

M0131

Price €1.40

2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino

2 Channel Relay Module DC 12V 10A Low/High Trigger for Arduino features:
- Channels: 2 (independent protected with Optocouplers)
- Supply voltage: 12V
- Output Current: 10A
- Relay activation current: 15mA ~ 20mA
- Insulation: Yes
- Trigger signal type jumper (low / high)
- LED indicator: For each channel
- Dimensions: 40x 50mm
- Has a jumper that allows to choose type of trigger signal (low / high)
- This module can be controlled directly by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL)

RL004

Regular price €2.60 -€0.50 Price €2.10

Plastic Water Solenoid Valve - 12V - 1 / 2 ″ Nominal

12VDC plastic solenoid valve. Normally closed. Liquid can flow in one direction and a minimum pressure of 0.02Mpa (3 PSI) is required. This liquid valve would be a great addition to your robotic gardening project. There are two 1/2 ″ outlets. Normally, the valve is closed. When 12VDC is applied to the two terminals, the valve can be opened and pushed.

M0210

Regular price €6.57 -€1.00 Price €5.57

ESP-12F ESP8266 12F WiFi Board Module

- WIFI module based on the ESP8266 controller
- ESP8266-12F is an improved version of ESP8266-12E
- It works as a standard WiFi 802.11 b / g / n 2.4 GHz. It is equipped with 22 outputs (pitch 2 mm) of which 11 are GPIO, ADC 1 and SPI. A LED and a PCB antenna have been incorporated
ESP-12F ESP8266 12F WiFi Board Module features:
- Supply voltage: 3.3V (LOGICAL LEVELS: 3.3V)
- Supported protocols: 802.11 b / g / n
- Network support: 2.4 GHz
- Band: 2400 (MHz)
- Wi-Fi Direct (P2p), Soft Access Point
- Integrated TCP / IP Stack.
- PLL, regulators and integrated energy management units
- Output power: 0.15 (W); + 19.5dBm in 802.11b mode
- Consumption in low energy mode: <10 uA
- Integrated 32-bit processor

W0064

Price €2.55
€0.95

0,95 tax excl.

1
30+ items
Price €0.95

The minimum purchase order quantity for the product is 2.

Order until 4pm we will send today
30 days return