Banana Plug Connector 4mm Male Black Banana Plug Connector 4mm Male Black features: - Arduino PCB Robot PCB Test Code K0025 Available Price €0.39
PMS5003 High Accuracy Particle Concentration Sensor The sensors can be integrated into a variety of instruments associated with a concentration of airborne particles to improve equipment, provide timely concentration, and have Exact data. Present the laser that scatters products on airborne particles, at the same time at a specific angle collect scattered light, changing the intensity curve that scatters over time. The microprocessor uses the algorithm based on the MIE theory to deduce the grain size contained in the air and the concentration of the particles per unit and quantity. Characteristic: - Power supply: 4.5-5.5 VDC - Measurement range: 0.3-1.0ï¼ ›1.0-2.5ï¼› 2.5-10 µm (micrometer) - Accuracy of count: 50%@> Code S0046 Available Price €27.90
2x Electronic Clips Crocodile 2x50mm Black + Red pack 2pcs 2x Electronic Clips Crocodile 2x50mm Black + Red features: - Length: 50mm- Quantity: 2 units Code K0026 Available Price €0.99
MH-Z19C Infrared Sensor module 5000ppm CO2 monitor HVAC PWM output UART CO2 sensor model MH-Z19C. High precision working voltage 5.0±0.1V DC. The measuring range is between 0 and 5000 ppm. It has a low power consumption. UART and PWM output. Code S0044 Backorder Price €29.49
2x Banana Connector Diameter 4mm Red and Black pack 2pcs 2x Banana Connector Diameter 4mm Red and Black features: - Length: 40 mm- Diameter plug: 4mm- Quantity: 2 units Code K0030 Available Price €0.79
Nova PM Sensor SDS011 - Air quality sensor - High precision laser PM2.5 Dust test module Air quality sensor with high precision whose SDS011 uses laser dispersion to detect particle concentration between 0.3 and 10 um in the air. With digital output by USB (UART) and built-in fan. It is a powerful sensor, fast (response less than 10s), accurate and reliable. Code S0142 Last items in stock Price €32.90
2x Cable Female - Female 4 Pins 4 Colors For connecting Arduino modules or boards. Ideal for your electronic projects, arduino, but can also be used with other microcontrollers. 2x Cable Female - Female 4 Pins 4 Colors features: - No soldering required - Circuits can be easily modified or revised - Quantity: 2 cables of 4 pins, female - female connector - Colors: red, black, blue, green - Pin pitch: 2.54mm - Cable lengths: 70cm For one rapid construction of a prototype of an electronic circuit. Code K0090 Available Price €0.99
SparkFun Pulse Oximeter and Heart Rate Sensor - MAX30101 & MAX32664 (Qwiic) This tiny little board features two chips from Maxim Integrated: MAX32664 and MAX30101. The 30101 Oximetry module is the sensor on board responding for both oximetry and heart rate sesnsing. The MAX32664 is equipped with a Cortex M4 handling algorithimc calculations, digital filtering and automatic gain control. The board comes with I2C and SparkFun has provided to it Qwiic connectors for ease of use. Code SP030 Last items in stock Price €52.99
Female to Female Cable 3 Pins 3 Colors Ideal for your electronic projects, Arduino, but can also be used with other microcontrollers. Code K0091 Available Price €0.95
MH-Z1311A low-power consumption NDIR CO2 sensor Low power CO2 sensor MH-Z1311A, the current consumption is only 150-200uA, waterproof and anti-corrosion, high sensitivity, additionally characterised by excellent linear output. It is very popular used for battery monitors and IAQ devices. Code S0158 Available Price €29.49
All-in-one air quality sensor ZPHS01B: CO2, PM2.5, CH2O, O3... ZPHS01B is an all-in-one air quality module, which integrates laser dust sensor, infrared CO2 sensor, electrochemical formaldehyde, ozone and carbon monoxide sensors, VOC sensor, NO2 sensor, temperature and humidity sensor. Code S0151 ✗ Out-of-Stock Regular price €145.90 -€6.00 Price €139.90
40x Female-Female Cable 10cm 40x Female-Female Cable 10cm features: - Length: 10cm - Quantity: 40 cables - Dupont female connectors on both ends - Compatible with 2.54mm male connectors - High quality and good working conditions - Easy to install and use Code K1005 Available Price €1.99
Gravity: Analogue heart rate monitor sensor (ECG) for Arduino The DFRobot heart rate monitor sensor (SEN0213) is used to measure the electrical activity of the heart. Code DF015 Last items in stock Price €28.95
Lot of 100unds White Nylon Clamps Lot of 100unds White Nylon Clamps features: - Plastic flange, polyamide 100x2.5mm plastic flanges - quantity: 100units Code K0259 Available Price €1.79
EMG Muscle Signal Sensor Signal Electromyography EMG Muscle Signal Sensor Signal Electromyography features: EMG Muscle signal sensor module kit with 6 disposable electrodes The EMG sensor serves as a bridge to detect small electrical pulses product of muscle activity and transform them into a signal recognizable by Arduino. NOTE: DO NOT USE THIS SENSOR FOR MEDICAL PURPOSES. Code Examples: https: //github.com/AdvancerTechnologies/MuscleSensorV3 Code M0116 Last items in stock Price €36.90
Alligator clip connectors Red + Black pack 2unds Alligator clip connectors Red and Black. Code K0255 Available Price €0.59
40x Male to male cables 10cm 40x Male to male cables 10cm features: - Length: 10cm - Quantity: 40 cables - Dupont male connectors on both ends - Compatible with 2.54mm female connectors - High quality and good working condition - Easy to install and use Code K0107 Backorder Price €1.99
Sensor: photoelectric E3Z-T61A 2M OMRON Photoelectric sensor standard, reliable assurance of 1 million units per year. · Industry's top class built-in amplifier · Guaranteed low-temperature operation that can be used in freezing warehouse · Improvement of coincidence between optical and mechanical axis. · Protection of sensor even if wiring mistake occurs output reverse protection function is carried (we add diode for reverse connection protection to output line). Code S0139 Available Price €85.00
Capacitive Fingerprint Scanner - UART (AD-013) - OBSOLETE This fingeprint scanner from ADH-Tech combines a highly precise fingerprint sensor module with an onboard MCU and UART interface enabling trivially very connection to any project. The scanner independently reads and analyses the fingerprint thanks to an MCU algorithm that can send a converted digital signal to a peripheral serial interface for a data read. The onboard MCU algorithm enables operations such as for example a fingerprint enroll. Code SP036
40x Female Male 10cm 40x Female Male 10cm features: - Length: 10cm - Quantity: 40 cables - Compatible with 2.54mm male connectors - High quality and good working conditions - Easy to install and use Code K0106 Available Price €1.99
2x Cable Alligator Clip Black and Red Multimeter 2x Cable Alligator Clip Black and Red Multimeter features: - Length: 90cm- Colors: red and black- Quantity: 2 Cables Code K0016 Available Price €2.99
CJMCU-811 CCS811 Carbon monoxide VOC CO Digital air quality gas sensor The Carbon Monoxide sensor is a low-power digital gas sensor which has a CCS811 sensor and an 8-bit microcontroller, contains an analog-digital converter so that it can detect indoor air quality which can detect monoxide carbon (CO) and a wide range of volatile organic compounds (VOCs). It is a sensor designed to monitor air quality inside personal devices such as mobile devices and smart watches, with low power consumption that can be used with battery Code S0140 Available Price €17.95
Cable 1x1.5 Flexible Single-pole 1.5mm black 1m Characteristic: -Low voltage electric cables -Normal: EN 50525-2-31 -Number of conductors: 1x1.50mm2 -Service voltage: 450 / 750V -Service temperature: at 70ºC -Resistance at 20ºC: 13.3 Ohm / Km -Weight (Kg / Km): 21 -External diameter: 3.4mm -Length 1m Code K0041 Available Price €1.08
Cable 1x1.5 Flexible Single-pole 1.5mm green-yellow 1m Characteristic: -Low voltage electric cables -Normal: EN 50525-2-31 -Number of conductors: 1x1.50mm2 -Service voltage: 450 / 750V -Service temperature: at 70ºC -Resistance at 20ºC: 13.3 Ohm / Km -Weight (Kg / Km): 21 -External diameter: 3.4mm -Length 1m Code K0043 Available Price €1.08
NDIR CO2 Sensor MH-Z14A Carbon dioxide detection MH-Z14A NDIR infrared gas module is a small size and common type sensor using the non-dispersive infrared (NDIR) principle to detect the existence of CO2 in air, with good selectivity, non-oxygen dependent and long lifetime. Code S0149 Available Regular price €29.95 -€6.00 Price €23.95
BME280 Digital Temperature Humidity Barometric Pressure Module This module includes the component BME280 that is translated into a digital signal.The equipment uses the two I2C and SPI interfaces. The BME280 does not allow the module to be used as an altimeter as opposed to its successor BMP280.Its 5-pin straight connector allows easy connection to other electronic boards. BME280 Digital Temperature Humidity Barometric Pressure Module features: - Interfaces:- I2C (up to 3.4 MHz)- SPI (up to 10 MHz)- Supply voltage: 1.8-5VDC- Module operating range:- Temperature: -40ºC to + 85ºC- Humidity: 0-100%- Pressure: 300-1100 hPa- Resolution of the measures:- Temperature: 0.01ºC- Humidity: 0.008%- Pressure: 0. 18Pa- Accuracy of the measures:- Temperature: +/> Code M0135 ✗ Out-of-Stock Regular price €14.95 -€5.00 Price €9.95
DS18B20 Digital Temperature Sensor Probe 10m Encapsulated with water resistant stainless steel with sensor dimensions 5,5 * 50mm, cable length 10m. DS18B20 Digital Temperature Sensor Probe 10m features:- Based on the DS18B20 chip- Supply voltage: 3 ~ 5.5V- Consumption <5mA- Measuring Range: -55 °C to 125 °C- Accuracy: +/- 0,5ºC- Outputs: - GND black - Vcc red - Yellow digital output- Inocidable steel- Cable length: 10m Code S0127 Available Price €14.99
Cable 1x0.35 Flexible Single-pole 0.35mm blue 3m Characteristic: -Low voltage electric cables -Normal: EN 50525-2-31 -Number of conductors: 1x0.35mm2 -Service voltage: 300 / 500V -Service temperature: at 70ºC -Resistance at 20ºC: 55.0 Ohm / Km -Weight (Kg / Km): 7 -Outer diameter: 2.4mm -Length 1m Code K0035 Backorder Price €0.45
MQ-3 Alcohol Sensor Module Ethanol Breathalyzer Ethanol alcohol sensor module.MQ gas sensor uses a small indoor heater with an electrochemical sensor.When the alcohol molecules in the air comply with the electrode the ethanol "changes" into acetic acid and then more current is produced.MQ-3 Alcohol Sensor Module Ethanol Breathalyzer features:- Main chip: alcohol sensor MQ-3 and comparator LM393- Working voltage: 5V- Current: 150mA- Digital output: TTL 0/1- Analog output: analog voltage sensing value- Detection concentration:- 0.05mg/L - 10mg/L- Quick response features:- Adjustable sensitivity with the potentiometer- Size: 32mm x 20mmx 18mm Code S0009 Available Price €2.95
Cable 1x0.35 Flexible single-pole 0.35mm red 3m Characteristic: -Low-voltage electric cables -Standard: EN 50525-2-31 -Number of conductors: 1x0.35mm2 -Service voltage: 300 / 500V -Service temperature: at 70ºC -Resistance at 20ºC: 55.0 Ohm / Km -Weight (Kg / Km): 7 -Outer diameter: 2.4mm Code K0033 Backorder Price €0.45
GY-91 10DOF 4 Sensors in 1 Module with MPU-9250 and BMP280 This small 10-DOF sensor module GY-91 is more compact than the GY-80 module.The module uses a unique MPU-9250 chip combination with built-in 3-axis gyroscope, 3-axis accelerometer, digital compass and BMP280 enhanced barometric pressure sensor.The MPU-9250, delivered in a 3x3x1mm QFN package, is the smallest 9-axis MotionTracking device in the world and incorporates the latest InvenSense design innovations, allowing dramatically reduced chip size and power consumption, while improving the performance and the cost. Enhancements include low-power accelerometer mode support with only 6.4μA of and provides improved 16-bit compass data resolution (0.15 μT per LSB). Code M0079 Available Price €15.95
GP2Y0A21YK0F Strong Infrared IR Distance Meter Characteristic: - Supply voltage: 4.5V- 5.5V - Consumption: 30 mA typical - Analog output - Range: 10cm to 80cm - Dimensions: 29x12mm - Cable length: 20cm GP2Y0A21YK0F Sharp Analog IR distance sensor 10CM-80CM Arduino Code S0024 Available Price €9.95
Gravity: Analog Turbidity Sensor For Arduino The Arduino turbidity sensor SEN0189 detects water quality by measuring turbidity levels. It can detect suspended particles in water by measuring the light transmittance and the scattering coefficient, which changes with the amount of total suspended solids (TTS) in the water. Code DF001 Last items in stock Price €14.49
Cable 1x0.35 Flexible single-pole 0.35mm black 1m Cable 1x0.35 Flexible single-pole 0.35mm² black features: -Conductor: Flexible Copper -Insulation: PVC -Low voltage electrical cables -Standard: EN 50525-2-31 -Number of conductors: 1x0.35mm² -Service voltage: 300 / 500V -Service temperature: at 70ºC -Resistance at 20ºC: 55.0 Ohm / Km -Weight (Kg / Km): 7 -Outer Diameter: 2.4mm Code K0031 Backorder Price €0.45
Flat Cable 1m AWG28 1.27 10 Pins Colors The cables are in 10 different colors Flat Cable 1m AWG28 1.27 10 Pins Colors features: - Length: 100cm - Model AWG28 - Product name: Flat cable - Number of conductors: 10 - Conductive material: Copper - Insulation voltage: 300V - Inner diameter 0.32mm - Pin Pitch: 1.27mm - Temperature: 105 ° C Code K0003 Available Regular price €3.49 -€0.51 Price €2.98
Gravity: SHT1x Temperature & Humidity Sensor Gravity: SHT1x Temperature & Humidity Sensor (DFR0066) Accurate, durable, highly compatible and easy to use, it has all the attributes that a superior temperature and humidity sensor requires. Code DF018 Last items in stock Price €25.90
Flat Cable 1m AWG28 1.27 Gray 10 Pins Flat Cable 1m AWG28 1.27 Gray 10 Pins features: - Length: 100cm - Model AWG28 - Product name: Flat cable - Number of conductors: 10 - Conductive material: Copper - Insulation voltage: 300V - Inner diameter 0.32mm - Pin Pitch: 1.27mm - Temperature: 105 ° C Code K0002 Available Price €2.50
SONOFF MS01- Smart Soil Moisture Sensor MS01 works with SONOFF TH10/16 to accurately measure soil moisture and send data to your mobile phone. MS01 can regularly water and check soil moisture anytime and anywhere to make your flowers grow healthier. This is an accessory used in SONOFF TH10 / TH16. Code WS044 ✗ Out-of-Stock Price €14.90
Inductive proximity sensor PL-05N 5mm with NPN output Inductive Proximity Sensor PL-05N NPN Limit Switch is used for controlling machinery as part of a control system, as a safety interlock, or to count objects passing a point. Inductive proximity sensor PL-05N 5mm with NPN output features: - Manufacturer: Fotek,- Square Type,- Sensing distance: 5mm,- Operating voltage: 10 - 30 VDC,- Response frequency: 800Hz,- Output method: NPN, 150mA load,- Hysteresis: <10% of sensing distance,- Protection degree: IP67,- Working temperature/Hum: -20ºC - +80ºC, 35% - 90% RH,- Body dimension: 30.5x17.9x10.2mm (LxWxH),- Mounting Method: Flush,- Sensing Direction: Horizontal,- Materia Housing: High-impact plastic,- Screw hole: 3.2mm, Pitch: 10.5mm, Code S0130 ✗ Out-of-Stock Price €11.90
Gravity: I2C BME280 Environmental Sensor The BME280 is an environmental sensor (SEN0236) integrating a temperature sensor, a humidity sensor and a barometer. Powered from 3.3 V to 5 V with I2C and SPI interface. Measuring range: temperature: -40 °C to 85 °C, humidity: 0 %RH to 100 %RH, pressure: 300 hPa to 1100 hPa. Code DF017 Available Price €19.95
Cable Silicona SIF 0.5mm2 Cu -50...+180°C Black flexible - roll 100m Flexible multi-conductor (stranded) SIF type flexible copper cable with silicone insulation. Conductor; silicone; SIF; 1 conductor; Cu; 0.50mm2; black; silicone; halogen free; heat resistant; -50...+180°C; 300/500V; 100m coil; Lappkabel; RoHS; OLFLEX HEAT 180 SIF; 2.1mm; 1x0.50mm2. Code K0101 Available Price €69.95
Vertical Liquid Level Sensor Switch Double- 400mm Level sensor for liquids with float. The liquid level sensor acts as a switch. Liquid level float sensors are used when constant control and regulation of the liquid level (water, oil and other fluids) is required such as extraction pumps. The sensor is equipped with a float with a magnet which, acting by the buoyancy force of the fluid, moves along the tube, shortening or opening the reed switch. It can be used to detect liquid levels that are too high or too low. Ideal for all those applications where the level of non-corrosive liquids such as water tanks or aquariums needs to be monitored. It is made of stainless steel. Code S0159 Last items in stock Price €38.95
Temperature Sensor Module MLX90614ESF-DCI GY-906 The GY-906DCI is a plate-mounted temperature sensor, based on an integrated 3 V infrared thermometer, single zone, medical precision, compensated gradient, within 15 cm the accuracy is high, approximately 0.5 degrees Code S0147 Available Price €39.90
Silicone Cable Li2G 0.5mm2 10A 1kV -50÷180°C Black Flexible Double silicone insulated cables. Extremely flexible. The inner insulation is white which makes it easy to see if there is any damage. Resistant to low and high temperatures. Ideal for measuring cables used for dangerous voltages. Code K0109 Available Price €2.85
Silicone Cable Li2G 0.5mm2 10A 1kV -50÷180°C Red Flexible Double silicone insulated cables. Extremely flexible. The inner insulation is white which makes it easy to see if there is any damage. Resistant to low and high temperatures. Ideal for measuring cables used for dangerous voltages. Code K0108 Available Price €2.85
Sensor SCT-013-050, Non-Invasive 50A AC Current Meter The sensor measures the current flowing in the cable without cutting it. The measurement is made on a single insulated wire, the output is an analog voltage from 0 to 1 V. Sensor SCT-013-050, Non-Invasive 50A AC Current Meter Code M0220 Available Price €6.95
Cables for Multimeter 2 Cables for 1M Multimeter Meter features: - Voltage 1000V, 10A CAT III- Total length 110cm- Red and black colors Code K0012 Available Price €3.95
M18 Inductive Proximity Sensor M18 Inductive Proximity Sensor features: - Inductive proximity sensor detection switch LJ18A3-8-Z / BX - NPN DC6-36V - A Often used for 3D printer bed leveling - Cylindrical cable type DC 3 cable type (black, brown, blue) - Inductive sensor type - NPN NO (Normal Open ) - Detecting distance 8mm - DC supply voltage 6-36V - Current output 300mA - Response frequency 0.5KHz - Detects iron / aluminum - Operating temperature -25 ° C to + 70 ° C (Non-freezing condition) - Head diameter 18 mm - Size 6.9 x 2cm - Cable length 90cm Code S0042 Available Price €3.49
E18-D80NK Infrared Obstacle Avoidance Sensor Module 3-80cm Smart Car Ideal for projects with ARDUINO, Smart CarDetects transparent and translucent obstaclesE18-D80NK Infrared Obstacle Avoidance Sensor Module 3-80cm Smart Car features:- Current consumption: up to 100 mA- Supply voltage 5V- Current consumption <25mA- Response time of 2 ms- Measured distance: 3-80cm 15st angle- Screw to adjust the sensitivity, the back- Output status led indicator- Operating temperature: -25°C - + 55°C- Material: high-strength plastic- Type of output: normally open, NPN- Dimensions: 18 mm in diameter, Length 45 mm- Cable length 55cm- Departures: - Brown: + - Blue: - - Black: OUT Code S0004 Available Price €6.95
Sensor Module ML8511 UV Sensor Module ML8511 UV features: - The module converts the photocurrent into voltage to detect UV intensity - The analog voltage is proportional to UV light detecting - The has a power saving mode of up to 0.1uA, suitable for smart portable devices or mobile phones for use - Power supply: 5V - Analog output - Captured wavelength: 280-390nm - Ultra low power consumption - Meteorological applications, skincare, industrial UV level measurement - Dimensions of PCB: 30x22mm Code S0040 ✗ Out-of-Stock Price €5.29
10x Female-Female Cables 20cm Jumpers Dupont 2,54 10x Female-Female Cables 20cm Jumpers Dupont 2,54 features: -Length: 20cm-Quantity: 10 cables-Connectors have female header contacts at either end -Compatible with male connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0005 Available Price €1.69
10x Male-Male Cables 20cm Jumpers Dupont 2,54 10x Male-Male Cables 20cm Jumpers Dupont 2,54 features: -Length: 20cm-Quantity: 10 cables-Connectors have male header contacts at either end-Compatible with female connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0007 Available Price €1.69
Air quality sensor ZP07-MP503 Gas detection The ZP07-MP503 air quality module offers high sensitivity with low power consumption and long life. Calibration before shipment from 10 seconds to 3 minutes max. with automatic warm-up function. Automatic fault check. Code S0150 Available Price €5.45
Barometric Pressure, Temperature and Altitude Sensor BMP180 Barometric Pressure, Temperature and Altitude Sensor BMP180 features: - Module based on the atmospheric pressure sensor BMP180- Supply voltage: 1.8 - 3.6 V- Energy consumption: 0.5uA- I2C interface- Measuring range: 300 - 1100hPa- Dimensions: 10 x 13 mm- Includes soldering pins Code M0024 Available Regular price €3.89 -€0.59 Price €3.30
10x Female-Male Cables 20cm Jumpers Dupont 10x Female-Male Cables 20cm Jumpers Dupont features: -Length: 20cm-Quantity: 10 cables-Connectors have male and female header contacts at either end-Compatible with male and female connectors 2,54mm-High quality and good working conditions-Easy to install and use Code K0009 Available Price €1.69
Black UV sensor module UVM-30 for Arduino UVM-30A sensor module suitable for any location and requires stable and precise measurement of UV light. Ideal for Arduino projects. Black UV sensor module UVM-30 for Arduino features: - Operating voltage: 3-5 VDC, - Voltage input: DC 0-1 VDC, - 3-pin connector: - GND (-): ground connection, - Out: sensor output signal, - VCC (+): sensor supply, - Measurement accuracy: +/- 1UV index, - Working current: 0.06mA (standard) / 0.1mA (max.), - Response wavelength: 200-370 nm, - Working temperature: -20ºC - + 85ºC, - PCB size: 28x12mm. Code M0178 Available Price €9.95
USB to Micro USB On/Off Switch for Arduino Charger Cable It has an ON / OFF switch that will cut off power when you don't need it. USB to Micro USB On/Off Switch Arduino Charger Cable features: - Black color - Length: 150cm - Maximum current 1A Code K0054 Available Price €2.85
USB to DC Charger Cable 2.1/5.5mm USB to DC Charger Cable 2.1/5.5mm features: - Charger Cable for Arduino Android- Color: Black- Length: 120cm Code K0055 Available Price €1.49
DS18B20 Submersible Probe Sensor Temperature Encapsulated with water resistant stainless steel with sensor dimensions 5,5 * 50mm, cable length 100 cm.DS18B20 Submersible Probe Sensor Temperature features:- Based on the DS18B20 chip- Supply voltage: 3 ~ 5.5V- Consumption <5mA- Measuring Range: -55 °C to 125 °C- Accuracy: +/- 0,5ºC- Outputs: - GND black - Red Vcc - Yellow digital output- Inocidable steel- Cable length: 1m Code S0019 Available Price €2.39
Multimeter Cable Polymeter Jack Alligator Clip Banana Plug Multimeter Cable Polymeter Jack Alligator Clip Banana Plug features: - Length: 90cm - Colors: red and black - 4mm diameter plug - Quantity: 2 Cables Code K0053 Available Price €2.99