CJMCU-811 CCS811 Carbon monoxide VOC CO Digital air quality gas sensor
  • CJMCU-811 CCS811 Carbon monoxide VOC CO Digital air quality gas sensor
  • CJMCU-811 CCS811 Carbon monoxide VOC CO Digital air quality gas sensor
  • CJMCU-811 CCS811 Carbon monoxide VOC CO Digital air quality gas sensor

CJMCU-811 CCS811 Carbon monoxide VOC CO Digital air quality gas sensor

S0140

The Carbon Monoxide sensor is a low-power digital gas sensor which has a CCS811 sensor and an 8-bit microcontroller, contains an analog-digital converter so that it can detect indoor air quality which can detect monoxide carbon (CO) and a wide range of volatile organic compounds (VOCs). It is a sensor designed to monitor air quality inside personal devices such as mobile devices and smart watches, with low power consumption that can be used with battery

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

The Ccs811 sensor monitors air quality with an 8-bit Microcontroller that is integrated to execute the 12-bit Analog-Digital conversion algorithm for sensor readings and Digitized conversions with an I2C slave interface which allows connection to the master control system, The CCS811 is based on microplate technology which is effective for gas sensors with fast cycle times and a significant reduction in power consumption.

SPECIFICATIONS AND CHARACTERISTICS

  • Operating voltage: 1.8-3.3V
  • Average operating current: 30mA
  • Operational ambient temperature: -40 ° C - 85 ° C
  • Storage temperature -40 ° C - 125 ° C
  • Product shelf life: 5 years
  • Size: 15mm x 21mm
  • Volatile Organic Compound Detection: 0 to 32,768 parts per million (ppm)
  • Carbon Monoxide Detection: 400 parts per million at 29,206 ppm

The module has 8 pins:

  • - Vcc
  • - GND
  • - SCL (Serial Clock Line, used to provide clock pulse for I2C communication).
  • - SDA (Serial Data Address, used to transfer the data through I2C communication)
  • - WAK (Wake (active low))
  • - INT (Interrupt (active low))
  • - RST (Reset (Active Low))
  • - ADD (Single address selection bit to allow alternative address to be selected)

Useful links

 Arduino CCS811 Libreries 

Customers who bought this product also bought

RFID Module with Card and Pendant

It is compatible with almost any microcontroller, Arduino, PIC, AVR.
It can be used in Access Control projects and Alarm projects. RFID Module with Card and Pendant features:
- Supports Quick CRYPTO1 and MIFARE
- Operating current: 13-26mA at 3.3V
- Standby current: 10-13mA to 3.3V
- Sleep-mode current: <80μA
- Maximum current: 30mA
- Frequency of operation: 13.56Mhz
- Reading distance: 0 to 60mm
- Communication protocol: SPI
- Maximum SPI speed: 10Mbit / s
- Maximum data rate: 10Mbit / s
- Operating temperature: -20 to 80ºC
- Humidity of operation: 5% -95%

M0015

Price €2.31

TP4056 Lithium Battery Charger Module 5V Micro USB

TP4056 5V Micro USB Lithium Battery Charger Module features:
- Based on TP4056ES regulator
- Lipo micro USB Li-Ion charger
- Input Voltage: 4.5V - 5.5 VDC
- Full charge voltage: 4.2V +/- 1.5%
- Max Output Current: 1A
- Indicator LED: charging red, charging green
- Operating temperature: -10ºC to + 85ºC
- IN + and IN- connection for electronic circuits
- Battery protection against over-discharge voltage: 2.5V - Protection against over current battery: 3A
- Measurements: 25x19x5 mm
- Ideal for 18650 batteries

A0100

Price €0.82

Raspberry Pi Pico (With Soldered Header)

The first Raspberry microcontroller with the proprietary RP2040 chip and a dual-core Arm Cortex-M0+, the Foundation's cost-effective yet highly flexible solution. Designed for high performance and with a high degree of digital interfaces. Programming in C/ C++ and MicroPython.

RA131

Price €6.60

Sonoff DR - Sonoff DIN Rail Tray

Most Sonoff products are not DIN-rail mounted, making it difficult to place Sonoff products in the switchboard or control panel. With this simple tray you can place your switches inside the home's entrance box, for easy installation. 

WS029

Price €2.39

DHT22/AM2302 Temperature Sensor Humidity PCB + Digital Cable for Arduino

- The DHT22 humidity sensor is presented in a plastic body ideal for mounting on a panel or similar. It uses a capacitive sensor that returns a digital signal with the measurement - This sensor, unlike DHT11, is capable of measuring negative temperature values ​​and measures tenths of a degree
Characteristic:
- Operating voltage: 3 to 5.5 VDC - Humidity measurement range: 0-100% ± 2% accuracy
- Temperature measurement range: -40ºC to 80ºC ± 0.5º accuracy
- Maximum sampling rate: 2 seconds
Useful links for Arduino / Raspberry programming and projects with Arduino / Raspberry boards:
Write texts on the OLED 0.96 '' screen
- Read the measurements of the temperature / humidity sensor DHT22 / AM2302 on a 0.96 '' OLED screen
Send />

M0099

Regular price €5.36 -€2.00 Price €3.36

Electrical Contacts Cleaner Spray + Brush Kontakt S 400ml

A preparation to remove oxides and sulphites from electrical contacts and to provide protection against corrosion, ensures the flow of electricity especially in case of rusty or worn contacts.
It can be used in audio products - low frequency and high, electronic industry and in other places where clean contacts are required.
For cleaning contacts, electrical terminals, alternators, switches, plugs, sockets integrated circuits, lampholders, fuseholders, capacitor contacts, flowmeters etc. 400ml Electrical Contacts Cleaner Spray + Brush features:
- Restores low resistance in connections
- Used in audio technologies
- Protection against moisture and corrosion
- High quality - manufactured in EU

Q0028

Price €5.78
€14.83

14,83 tax excl.

1
Last 7 items
Price €14.83

Order until 4pm we will send today
30 days return