Cable 1x0.35 Flexible Single-pole 0.35mm blue 3m
  • Cable 1x0.35 Flexible Single-pole 0.35mm blue 3m

Cable 1x0.35 Flexible Single-pole 0.35mm blue 3m

K0035

Characteristic: -Low voltage electric cables
-Normal: EN 50525-2-31
-Number of conductors: 1x0.35mm2
-Service voltage: 300 / 500V
-Service temperature: at 70ºC
-Resistance at 20ºC: 55.0 Ohm / Km
-Weight (Kg / Km): 7
-Outer diameter: 2.4mm

-Length 1m

OEM
Add to wish list
Spend 100€ to get a 3% discount for all your orders within the next 12 months and even higher discounts for higher spend. Click here to review loyalty program rules

Characteristic:

-Low voltage electric cables
-Normal: EN 50525-2-31
-Number of conductors: 1x0.35mm2
-Service voltage: 300 / 500V
-Service temperature: at 70ºC
-Resistance at 20ºC: 55.0 Ohm / Km
-Weight (Kg / Km): 7
-Outer diameter: 2.4mm

Customers who bought this product also bought

NE555P DIP8 Precision Timer Integrated Circuit

NE555P DIP8 Precision Timer Integrated Circuit features:
- Blister: DIP8
- Number of pins: 8
- Step between pins: 2.54 mm
- Manufacturer: Texas Instrument - Input voltage VCC: 4.5 - 16 VDC
- THRES voltage level: 2.4 - 11.2 VDC
- TRIG voltage level: 1.1 - 5.6 VDC
- RESET voltage level: 0.3 - 1 VDC
- DISCH voltage level change out of state: 0.15 - 0.4 nA
- CONT voltage (open circuit): 2.6 - 11 VDC
- Low level output voltage: 0.1 - 0.4 V
- High level output voltage: 2.75 - 13.3 V - Output current I (O): ± 200 mA
- THRES current: 30 - 250 nA
- TRIG current: 0.5 - 2 μA
- RESET current: -0.4 - 0.4 μA
- Current change DISCH out of state: 20 - 100 nA

T0061

Price €0.65

L298N Motor Drive Controller Board Module Dual H Bridge DC

It allows controlling up to 2 direct current motors or a bipolar stepper motor. It also allows to control a unipolar stepper motor configured as bipolar.
Ideal for projects with ARDUINO.
You can use it with PIC, AVR, STM32.
L298N Motor Drive Controller Board Module Dual H Bridge DC features:
- Minimum operating voltage: 5 V
- Maximum operating voltage: 35 V
- Maximum current: ± 2 A
- Logic voltage: 5V
- PWM signal inputs for speed control
- Outputs: for 2 DC motors or for a bipolar stepper motor
- Measures: 43x43x24 mm
Helpful Links:
Operation of the robot by Infrared / Operation of the robot by Bluetooth / Automatic operation with detection of obstacles

M0100

Price €2.31

Soldering Iron 40W

Soldering Iron 40W features:
- Power: 40W
- Power: 230V
- Equipped with tip B1
- Long length tip: 1mm
- Anti-thermal handle
- CE, RoHS and TUV certifications

H0186

Regular price €6.60 -€1.00 Price €5.60

Digital Touch Sensor B21

The module is based on a touch sensitive IC capacitive touch switch module (TTP223B).
In the normal state, the module produces Low power consumption. When a finger touches the corresponding position, the module output is high, if not touched for 12 seconds, it switches to low power mode. Digital Touch Sensor B21 features:
- Low power consumption
- Input voltage: 2 - 5.5VDC
- Can replace the traditional touch of a button - Four M2 screws diameter 2.2 mm that position the holes for easy installation
- 3-pin control interface:
1- GND
2- VCC
3- Control signal (output pin)
- Power indicators: Bright green LED when the sensor is on

M0130

Price €1.23

10x Photoresistor GL5528 LDR

Photoresistor is a resistor whose resistance decreases with increasing intensity of light
that affects her 10x Photoresistor GL5528 LDR features:
- Model: GL5528
- Spectral peak: 540nm
- Maximum DC voltage: 150V
- Maximum power: 100mW
- Resistance with light (10lux): 10-20KΩ
- Resistance with darkness (0lux): 1MΩ
- Response time: 20ms
- Operating temperature: -30ºC - 70ºC
- 10k - 20k Arduino PiC 5mm
- Quantity: 10 units

S0050

Price €0.12

Cable 1x0.35 Flexible single-pole 0.35mm black 1m

Cable 1x0.35 Flexible single-pole 0.35mm² black features:
-Conductor: Flexible Copper
-Insulation: PVC
-Low voltage electrical cables
-Standard: EN 50525-2-31
-Number of conductors: 1x0.35mm²
-Service voltage: 300 / 500V
-Service temperature: at 70ºC
-Resistance at 20ºC: 55.0 Ohm / Km
-Weight (Kg / Km): 7
-Outer Diameter: 2.4mm

K0031

Price €0.37
€0.37

0,37 tax excl.

7
Pre-order
Do you want to receive an alert when product is back in stock?
 
We will send you an email once the product becomes available. Your email address will not be shared with anyone else.
Price €0.37

Order until 4pm we will send today
30 days return