BME280 Digital Temperature Humidity Barometric Pressure Module
  • BME280 Digital Temperature Humidity Barometric Pressure Module

BME280 Digital Temperature Humidity Barometric Pressure Module

M0135

This module includes the component BME280 that is translated into a digital signal.
The equipment uses the two I2C and SPI interfaces. The BME280 does not allow the module to be used as an altimeter as opposed to its successor BMP280.
Its 5-pin straight connector allows easy connection to other electronic boards. BME280 Digital Temperature Humidity Barometric Pressure Module features:
- Interfaces:
- I2C (up to 3.4 MHz)
- SPI (up to 10 MHz)
- Supply voltage: 1.8-5VDC
- Module operating range:
- Temperature: -40ºC to + 85ºC
- Humidity: 0-100%
- Pressure: 300-1100 hPa
- Resolution of the measures:
- Temperature: 0.01ºC
- Humidity: 0.008%
- Pressure: 0. 18Pa
- Accuracy of the measures:
- Temperature: +/>

OEM
Add to wish list

BME280 Digital Temperature Humidity Barometric Pressure Module description


This module includes the component BME280 that is translated into a digital signal.
The equipment uses the two I2C and SPI interfaces. The BME280 does not allow the module to be used as an altimeter as opposed to its successor BMP280.
Its 5-pin straight connector allows easy connection to other electronic boards.

BME280 Digital Temperature Humidity Barometric Pressure Module features:


- Interfaces:
- I2C (up to 3.4 MHz)
- SPI (up to 10 MHz)
- Supply voltage: 1.8-5VDC
- Module operating range:
- Temperature: -40ºC to + 85ºC
- Humidity: 0-100%
- Pressure: 300-1100 hPa
- Resolution of the measures:
- Temperature: 0.01ºC
- Humidity: 0.008%
- Pressure: 0. 18Pa
- Accuracy of the measures:
- Temperature: +/- 1ºC
- Humidity: +/- 3%
- Pressure: +/- 1Pa
- PCB size: 1.52x1.20 cm / 0.60x0.47 "

Customers who bought this product also bought

Micro SD Card Reader/Recorder

The micro SD card reader module is a simple solution for transferring data to and from a standard micro SD card.
The pinout is directly compatible with Arduino, but it can also be used with other microcontrollers.
Ideal for projects with ARDUINO, PIC, AVR, STM32.
Micro SD Card Reader/Recorder features:
- Supply voltage: 4.5V- 5.5V
- Adjustable 3.3V built-in regulator for SPI pins
- Consumption <200mA
- Interface: SPI
- Dimensions: 24mmx 42mm x 12mm
Supports microSD cards (up to 2G) and micro SDHC (up to 32G)

M0006

Price €2.06

Sonoff BasicR2 WiFi Wireless Smart Switch

SONOFF BasicR2 v2.2 Intelligent Switch offers you perfect intelligence control solutions for your home or workplace.
By using the wireless control of the free "eWeLink" application, it helps simplify your life so easily.
You can check the status of your appliance at any time and in any place, and control it by simply clicking on your smartphone or tablet through APP eWeLink, without limitation of time and distance. WI-FI Intelligent Remote Control Switch Sonoff features:
- Enclosure material: Flame retardant ABS
- Security: WPA / WPA2
- Power supply: 90 - 250V
- Max. Current: 10A
- Max. Power: 2200W,
- Establish schedules for automatic control:
      - It has unique, repetitive and countdown timers that you can use to control the on />

W0085

Regular price €7.43 -€1.00 Price €6.43

Kit compatible Makey Makey

The Makey Makey clone board - economic and compatible - is small and has a USB port to connect it to a computer and alligator clips to connect other objects. Just plug, clip and play, no programming skills or cumbersome software installation required. With a set-up in seconds, your child can get inventing, whether at home or in the classroom.

B0129

Regular price €19.79 -€1.49 Price €18.30

Momentary Switch Push Button Red N/O 7mm

Momentary Switch Push Button Red N/O 7mm features:
- Momentary pushbutton N/O (normally open)
- Red button
- Dimensions approx. 7 mm x 27 mm
- Recessed with nut and washer
- Load current (supported): 1A to 230V / 2A to 125V
- Drill to embed: 7 mm +/- 0.2
- Operating temperature: -55º to +85ºC

K0156

Price €0.37

Shield Li-Po Battery for WeMos D1 Mini ESP826

Shield Li-Po Battery for WeMos D1 Mini ESP826 features:
Connect the lithium battery to this shield to supply power for the entire D1 mini system.
When the battery is depleted, it is not necessary disconnect the battery, just use the usb port to charge directly. - Charging voltage: max: 10V, recommend: 5V
- Charging current: max: 1A
- Voltage lithium battery: 3.3-4.2V
- Boost power supply: 5V (max: 1 A)
- LED color: red for charging, green for fully charged
- Ports:
* Micro USB - Charging port (normal 5V)
* Connect to the lithium battery (normal 3.3-4.2V)
* J1 - setting the maximum charging current, 0.5 A or 1A

W0076

Regular price €3.93 -€1.00 Price €2.93

8 Channel High Trip 5V 10A Relay Module

This module can be directly controlled by the microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, from the TTL 8 Channel High Trip 5V 10A Relay Module features:
- Channels: 8 (independent protected with Optocouplers)
- Supply Voltage Vcc: 5Vdc
- Output Current: 10A
- High trip min 3.3V input IN1. ..IN8
- Relay activation current: 5 ~ 10mA
- Isolation: Yes
- Indicator LED: For each channel
- Dimensions: 55x 139mm
- Weight: 120g
COM GND jumper input: connects GND optocouplers and GND of the circuit

RL015

Price €8.22

MG-5 Gas Methane Sensor Module for Arduino

MG-5 Gas Methane Sensor Module for Arduino features:
- Main chip: MQ-5 natural gas sensor and comparator LM393
- Working voltage: 5V
- Current: 150mA
- Digital output: TTL 0/1
- Analog output: analog voltage sensing value
- Quick response features:
- Detection concentration:
- 200ppm - 10000ppm LPG, LNG, natural gas, propane,
- Adjustable sensitivity with the potentiometer
- Size: 32mm x 20mmx 18mm

S0029

Price €2.09
€12.36
Save €5.00 €7.36

7,36 tax excl.

Out of stock
Do you want to receive an alert when product is back in stock?
 
We will send you an email once the product becomes available. Your email address will not be shared with anyone else.
Regular price €12.36 Price €7.36

Order until 4pm we will send today
30 days return